Instruction/ maintenance manual of the product C935M Pelco
Go to page of 12
PMM2001 Monitor Installation/Operation Manual C935M (2/97) ® Pelco • 3500 Way, Clovis, CA 93612-5699 • USA • (800) 289-9100 or (1-559) 292-1981 FAX (800) 289-9150 or (1-559) 292-3827 • DataFA.
Pelco Manual C935M (2/97) CONTENTS Section Page 1.0 GENERAL .................................................................................................. 1 1.1 IMPORT ANT SAFEGUARDS ............................................................ 1 1.
Pelco Manual C935M (2/97) 1 1.0 GENERAL 1.1 IMPORT ANT SAFEGUARDS Before installing your equipment, please read the following important safeguards as outlined by Underwriters Laboratories Inc. Read Instructions All the safety and operating instructions should be read before the appliance is operated.
2 Pelco Manual C935M (2/97) Power-Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
Pelco Manual C935M (2/97) 3 1.2 UNP ACKING INSTRUCTIONS Unpack and inspect all parts carefully . The following items are supplied: 1 Monitor 1 Power cord 1 Installation/Operation Manual (C935M) Be sure to save the shipping carton and any inserts. They are the safest material in which to make future shipments.
4 Pelco Manual C935M (2/97) 2.0 DESCRIPTION The PMM2001 is a high resolution, black and white, CCTV video monitor . The cabinet is made of steel for ruggedness and, with the exception of the picture tube, the circuitry is all solid-state for reliability .
Pelco Manual C935M (2/97) 5 Figure 1. Single-Monitor Installation INPUT A OUTPUT A INPUT A OUTPUT A 3.0 INST ALLA TION 3.1 SURF ACE MOUNT The monitor has rubber feet and may be placed on any horizontal surface, such as a desk or table. 3.2 CONNECTIONS 3.
6 Pelco Manual C935M (2/97) NOTE: In multiple-monitor instal- lations, a maximum of three moni- tors can be connected together . Figure 2. Multiple-Monitor Installation FROM OUTPUT TO INPUT FROM OUTPUT TO INPUT REAR P ANEL OF MONIT OR FROM VIDEO SOURCE T O INPUT INPUT A OUTPUT A BRIGHT CONTRAST BRIGHT CONTRAST BRIGHT CONTRAST 3.
Pelco Manual C935M (2/97) 7 Figure 3. Location of Controls BRIGHT CONTRAST BRIGHTNESS CONTRAST PO WER ON-OFF SWITCH 4.0 OPERA TION Refer to Figure 3 for the locations of the controls. Power On/Off Switch - This rocker switch turns the power on or off.
8 Pelco Manual C935M (2/97) 5.0 MAINTENANCE The only maintenance required is to periodically clean the cabinet and screen. Use a damp cloth to clean the screen. Use mild soap and water to clean the cabinet. Some common household aerosol sprays, cleaning agents, solvents, or polishes may damage the cabinet finish.
Pelco Manual C935M (2/97) 9 6.0 SPECIFICA TIONS ELECTRICAL Input Voltage: PMM2001 120 VAC, 60 Hz PMM2001-X 230 VAC, 50 Hz Power Consumption: PMM2001 PMM2001-X 28 W Input/Output Signal: 1 V peak-to-pea.
10 Pelco Manual C935M (2/97) 7.0 WARRANTY AND RETURN INFORMA TION Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. Endura and ExSite are trademarks of Pelco. © Copyright 1997, Pelco. All rights reserved.
An important point after buying a device Pelco C935M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C935M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C935M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C935M you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C935M will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C935M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C935M.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C935M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C935M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
