Instruction/ maintenance manual of the product C2943M Pelco
Go to page of 28
INSTALLATION/OPERATION C2943M (1/08) Public V iew Monitor.
.
C2943M (1/08 ) 3 Contents Important Safe ty Instruct ions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Regulatory Notices .
4 C2943M (1/08) List of Illustrations 1 Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C2943M (1/08 ) 5 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed al l warnings. 4. Follow all instructions. 5. Do not use this ap paratus near water . 6. Clean only with dry cloth. 7. Do not bl ock any ven tilation openings.
6 C2943M (1/08) Regulatory Notices This device co mplies with Pa rt 15 of th e FCC Rules. Oper ation is subjec t to the following two co nditions: (1) this device may n ot cause ha rmful interference, and (2 ) this device must accept any interference received, including interference that may ca use undesired operat io n.
C2943M (1/08 ) 7 Description Public view monitors (P VM) are un its that co ntain a built -in camer a that is po inted in th e directio n the monito r faces.
8 C2943M (1/08) Installation MOUNTING The PVM accommo dates mounts that adhe re to the VESA ® 100 x 100 standard. For mounting from a ce iling, Pelco recommends using the PMCL-CM mo unt. This mount can be s wiveled 360 degrees, and lets you til t the monitor 35 degrees fo r the best viewing angle.
C2943M (1/08 ) 9 REAR PANEL CONNECTORS Figure 2. Rear Panel Connectors ì 24 V AC~: The 24 volt AC p ower . NOTE: The center pos t is not to be used. î Camera Out: The internal camera’ s video output signal. ï Video 2 (loop throug h): The input connections fro m a camera or a DVD player .
10 C2943M (1/08) Operation FRONT AND SIDE PANEL CONTROLS Figure 3. Front and Side Panel Controls ì (Power): T urns on/off t he monitor . î ! / VOL + and " /V O L -: Increases or decreases the volu me. Also selects or adjusts items on the on -screen menu.
C2943M (1/08 ) 11 INSTALLING REMOTE CONTROL BATTERIES Figure 4. Battery Installation 1. Open and remove the ba ck cover of the remote control. 2. Install two AAA size ba tteries (supplied). Match the plus (+) and minus (-) symbols on the batte ries to the symbols on the ba ttery compartment.
12 C2943M (1/08) REMOTE CONTROL FUNCTIONS Figure 5. Remote Control Functions ì POWER: T urns on/o ff power to t he monitor . î MUTE: T emporarily silences the soun d. T o return the sou nd, press MUTE again, or VOL + or VOL -. ï VIDEO1/VIDEO2/MEDI A/CAMERA: Displays all the available input sources.
C2943M (1/08 ) 13 t MENU/EXIT : Displays or exits the on -screen menu. u KEY LOCK: Locks the butt ons to pre vent unau thorized op eration of the equi pment. ~í ( " /VOL- and ! /VOL+, # , and $ ): Controls th e cursor on the on-screen menu and ad justs the volume up or down.
14 C2943M (1/08) MAIN MENU Figure 7. Main Menu PI C TURE B r ightness VIDEO-1 NT SC 50 C ont r ast 50 S ha r pness 9 C olo r 50 T int 50 C olo r T emp Red 50 G r een 50 Blue 50 Use r SC REEN S ET UP P.
C2943M (1/08 ) 15 MENU DISPLAY Figure 8. Menu T ree PI C TURE SC REEN S ETUP PVM S ETUP C Y C LE S ETUP C AMERA MAINTENAN C E Default values a r e in bold MAIN MENU B r ightness C ont r ast S ha r pne.
16 C2943M (1/08) MENU FIELD DEFINITIONS PICTURE Brightness: Adjusts the white level of the vide o screen imag e (0 to 100) . Contrast: Adjusts the black level of the video screen imag e (0 to 100). Sharpness: Adjusts the picture softer or sharper (0 to 15).
C2943M (1/08 ) 17 PIR Input: Sets the video in put that d isplays when motion is detected. Select VIDEO 1, VIDEO 2, or CAMERA. PIR Dwell: Sets t he length of t ime a selec ted video so urce trigge red by moti on detecti on displays o n the screen (5 to 20 seconds).
18 C2943M (1/08) MEDIA CONTROL Figure 9. Media T ype Selection Screen Press the Media Men u button on the remote cont rol to access the Media menu. Use th e left and right arrow buttons ( " and ! ) to highlight the desired media . Press the ENTER button.
C2943M (1/08 ) 19 Media Menu Display Figure 11. Media Menu T ree Slide Show Option Field Definitions TIME: Sets the lengt h of time a s elected pict ure displays on the screen in slide show mode: 1, 3, 5, or 10 seconds. The defa ult setti ng is 5 seconds.
20 C2943M (1/08) REPLACING THE CAMERA NOTE: Y o u must wear le ad-free gl oves and use ESD (electr ostatic disc harge) equi pment when ha ndling camera s. CAMERA REMOVAL 1. Place the monito r face down, being careful not to scrat ch or touch the screen.
C2943M (1/08 ) 21 SW1-1 V ideo Format SW1-1 is controlle d through the on-screen menu. SW1-2 Line Sync When multiple c ameras are conn ected to the s ame switching device, vertica l roll can occur on the moni tor . AC line lock eliminat es vertical roll by locking the frame rate to the power supply fre quency .
22 C2943M (1/08) CAMERA INSTALLATION AND CAMERA ADJUSTMENT 1. Plug the two camera connection leads from inside the moni tor into the connectors on the camera. 2. Attach t he camera usi ng three sp acers and thr ee screws (14 mm). Do NOT overtighte n the scr ews or the spac ers will colla pse.
C2943M (1/08 ) 23 Specifications MODELS PMP20B 20-inch (51 0 mm) LCD black mo nitor with WDR camera PMP20W 20-inch (51 0 mm) LCD white mo nitor with WDR camera PMP26B 26-inch (66 0 mm) LCD black mo ni.
24 C2943M (1/08) ELECTRICAL Input V oltage 24 VAC (50 /60 Hz) Power Consumptio n PMP20B, PMP2 0W 96 W (4.0 A) PMP26B, PMP26W 160 W (6.7 A) Input Interfaces Video: 2 BNC Media card (refer t o General on page 23 section) Output interfaces 1 BNC Camera Horizontal Frequency 15.
C2943M (1/08 ) 25 LENS SPECIFICA TIONS Focal Length 3.0 mm to 9.0 mm Format Size 1/3-inch F-Number f/1.5-3.0 Operation Iris Auto Focus Manual Zoom Manual Angle of V iew* Horizont al 32.4 ° to 1 3.6 ° Diagonal 41.4 ° to 17.2 ° V ertical 23.8 ° to 10.
26 C2943M (1/08).
PRODUCT W ARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without c harge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco C2943M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C2943M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C2943M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C2943M you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C2943M will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C2943M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C2943M.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C2943M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C2943M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
