Instruction/ maintenance manual of the product C2453M-D (2/06) Pelco
Go to page of 20
INST ALLA TION/OPERA TION Integrated Positioning System Remote Monitor Kit IPS-RMK C2453M-D (2/06).
.
C2453M-D (2/06) 3 Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 C2453M-D (2/06).
C2453M-D (2/06) 5 W elcome Thank you for purchasing Pelco's IPS-RMK, the remote monitor kit designed to assist in the installation and servicing of Spectra III ™ SE/Spectra III, Spectra ® Mini, Esprit ® , or ExSite ™ systems.
6 C2453M-D (2/06) Getting Started Before using the remote monitor kit, do the following: 1. T est the handheld to make sure it is ready for use. 2. Install the batteries for the monitor. T EST THE HANDHELD TO ENSURE IT IS READY FOR USE Batteries and software for the handheld were installed at the factory before the IPS-RMK was shipped.
C2453M-D (2/06) 7 INSTALL THE MONITOR BATTERIES The battery pack located on the back of the monitor holds 8 AA or 10 NiCad rechargeable batteries (batteries not included). T o install the batteries, do the following: 1. Remove the mointor from the monitor compartment of the IPS-RMK (refer to Figure 1).
8 C2453M-D (2/06) How to Assemble the Remote Monitor Kit Refer to Figure 4 for the following steps. Lift the handheld compartment. Open the bottom flap of the cable pouch. Pull the serial cable for the handheld out through the bottom of the pouch and connect to the bottom of the handheld.
C2453M-D (2/06) 9 Refer to Figure 5 for the following steps. Open the monitor compartment. Connect the top fl ap to the side flap. This will reduce the glare of the sun on the monitor when using the kit outdoors. This step is not required if there is no glare on the monitor .
10 C2453M-D (2/06) Figure 6. Remote Monitor Kit Connected to a IPS-RDPE-2 Figure 8. Remote Monitor Kit Connected to a Spectra Mini Dome Figure 7. Remote Monitor Kit Connected to a Spectra III Dome.
C2453M-D (2/06) 11 How to Adjust the Monitor Figure 9. Monitor Controls NTSC/P AL switch: Set the NTSC/PAL switch to the correct setting for your location. Manual/Auto switch: Select Auto to use the preset standard color adjustment. Set to Manual to set the color , tint, and brightness manually.
12 C2453M-D (2/06) How to Control the Positioning System Using the Handheld The Spectra III, Spectra Mini, Esprit, and ExSite utilities are installed on the handheld contained in this kit. The handheld is ready for immediate use. Before using the handheld to control a system, know how to operate the handheld.
C2453M-D (2/06) 13 PTZ CONTROL MENU OPEN (Iris Open): T ap the OPEN button to make a selection. CLOSE (Iris Close): T ap the CLOSE button to cancel a selection. NEAR (Focus Near): T ap the NEAR button to focus near. FAR (Focus Far): T ap the FAR button to focus far .
14 C2453M-D (2/06) How to Upload Software Operating software and language fi les can be uploaded to a Spectra III Series, Spectra Mini, or ExSite system. The latest version of the control/upload utility is installed on the handheld. T o upload future revisions, refer to How to Download Software to the Handheld .
C2453M-D (2/06) 15 3. Enter the name of the software title where the blinking cursor appears on the screen. Figure 14. Enter Software T itle 4. T ap the Upload button. The software upload starts. 5. Wait until "Done" appears on the screen before unplugging the RJ-45 cable.
16 C2453M-D (2/06) T roubleshooting Error Message Explanation Please Choose a File T o Upload No file was specified before clicking Upload. File Not Found The file specified is not on the handheld device. Go to the handheld information screen to verify the fi le exists.
C2453M-D (2/06) 17 Specifications IPS-RMK Handheld Size 4.7" H x 3.1" W x .7" D (11.9 x 7.9 x 1.8 cm) Weight 4.4 oz (.20 kg) Memory 8 MB Battery 2 AAA batteries Display Advanced LCD with backlight Expansion Serial port Operating System Palm OS compatible, version 3.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products.
REVISION HISTORY Manual # Date Comments C2453M 7/02 Original version. C2453M-A 4/03 Added Esprit and IPS-RDPE-2 information. C2453M-B 1/04 Revised per ECO# 03-9497 for software revision. C2453M-C 7/05 Added ExSite system information. C2453M-D 2/06 Added Spectra Mini system information.
United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www.
An important point after buying a device Pelco C2453M-D (2/06) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C2453M-D (2/06) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C2453M-D (2/06) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C2453M-D (2/06) you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C2453M-D (2/06) will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C2453M-D (2/06), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C2453M-D (2/06).
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C2453M-D (2/06). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C2453M-D (2/06) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center