Instruction/ maintenance manual of the product C2224M-B Pelco
Go to page of 4
C2224M-B (12/06) PMCL-WMT Monitor Mount Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Installation should be done only by qualified personnel and conform to all local codes.
3. Attach the wall bracket to the wall with the short side pointing down. Mounting hardware is not supplied. a. If installing the mount to a wood stud wall, the stud must be at least 2 inches x 4 inches with a maximum 0.5-inch thick layer of wallboard or plywood.
4. Carefully slide the monitor mount into the slots of the wall bracket. Use the 10-32 socket head screw and the flat washer (supplied) to fasten the wall bracket to the monitor mount. Refer to Figure 4. Use the 5/32-inch Allen wrench (supplied) to tighten the screw .
W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco C2224M-B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C2224M-B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C2224M-B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C2224M-B you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C2224M-B will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C2224M-B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C2224M-B.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C2224M-B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C2224M-B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
