Instruction/ maintenance manual of the product C1506M Pelco
Go to page of 12
® Installation/Operation IRD/ERD2000 Series Receiver C1506M (3/00) Pelco • 300 W . Pontiac Way , Clovis • CA 93612-5699 USA • Pelco Online @ www.
[ 2 ] Pelco Manual C1506M (3/00) Prior to installation and use of this product, the following WARNINGS should be observed. 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes.
Pelco Manual C1506M (3/00) [ 3 ] DESCRIPTION The IRD/ERD2000 Series Receiver operates Pelco’s fixed speed pan/tilts and domes. The receiver works with standard and extended Coaxitron ® controllers, including the CM6700/7500/8500/ 9500, KBD9000, MPT9000/9008/9500, and MX4000.
[ 4 ] Pelco Manual C1506M (3/00) ERD2200 WIRING ERD2200 Power Connections ENCLOSURE POWER OUT L L N N 115V 230V 115V POWER SELECTOR SWITCH GROUND STUD POWER TERMINALS MAIN FUSE ENCLOSURE FUSE MAIN POWER IN 1. Fuses are installed for 1 15 V AC operation.
Pelco Manual C1506M (3/00) [ 5 ] 6. Connect the pan/tilt controls (up, down, left, right, and common). 7. Connect the camera power. If your camera uses 24 V AC, connect the camera to the CAM PWR connector on the front of the re- ceiver . The camera’s power must not exceed 5 vA.
[ 6 ] Pelco Manual C1506M (3/00) IRD2024 WIRING Front View of Receiver 24V AC P AN/TILT CAM PWR I F Z C LENS AUX1 AUX2 5V CN N C O PWR CX IN OUT VIDEO TLC CC ~ + Rear View of Receiver 1. Connect power to the 24 V AC INPUT connector on the rear of the receiver .
Pelco Manual C1506M (3/00) [ 7 ] OPERA TION When power is applied to the receiver , the green PWR LED on the receiver lights. Whenever the receiver gets a valid Coaxitron control signal, the green CX LED blinks.
[ 8 ] Pelco Manual C1506M (3/00) FUSE REPLACEMENT IRD2024 Lens/Auxiliary Fuse – A 500 mA fuse protects the LENS and AUX 1 outputs. Remove the cover of the receiver to check the fuse. ERD2200 Main Fuse – The main fuse protects the pan/tilt output when 24 V AC pan/tilt operation is selected.
Pelco Manual C1506M (3/00) [ 9 ] Wire Gauge T able A 24 V AC Wiring Distances T able The following are the recommended maximum wire distances (transformer to load) for 24 V AC applica- tions and are calculated with a 10-percent voltage drop. (T en percent is generally the maximum allowable voltage drop for AC-powered devices.
[ 10 ] Pelco Manual C1506M (3/00) SPECIFICA TIONS ERD2200 ELECTRICAL Input V oltage: 1 15/230 VAC, 50/60 Hz Output V oltage Camera: 24 V AC (or 115/230 V AC if using enclosure power) Lens: 8 VDC Pan/T.
Pelco Manual C1506M (3/00) [ 11 ].
WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Three years on Genex ® Series (multiplexers, server, and keyboard).
An important point after buying a device Pelco C1506M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C1506M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C1506M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C1506M you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C1506M will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C1506M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C1506M.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C1506M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C1506M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
