Instruction/ maintenance manual of the product WX8000 Pelco
Go to page of 28
MPT8000 Series Wir etr on Digital T ransmitter/ Controller and WX8000 Series Receiver/Driver Installation/ Operation Manual C585M-B (11/98) Pelco • 3500 Pelco Way, Clovis • CA 93612-5699 USA In No.
2 Pelco Manual C585M-B (11/98) CONTENTS Section Page 1.0 GENERAL .................................................................................................. 5 1.1 IMPORT ANT SAFEGUARDS AND WARNINGS ............................... 5 1.2 UNP ACKING INSTRUCTIONS .
Pelco Manual C585M-B (11/98) 3 REVISION HISTOR Y Manual # Date Comments C585M 1985 Original version. C585M-A 4/90 Rev A. Revised manual to include instructions on converting the WX802RX and WX8024RXI receiver/ drivers to operate on 24 V AC input voltage.
4 Pelco Manual C585M-B (11/98) (This page intentionally left blank.).
Pelco Manual C585M-B (11/98) 5 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed.
6 Pelco Manual C585M-B (11/98) 1.2 UNP ACKING INSTRUCTIONS Unpack and inspect all parts carefully . The following items are supplied: 1 MPT8000 Series Wiretron Controller or 1 WX8000 Series Receiver/Driver 1 Installation/Operation Manual (C585M-B) Be sure to save the shipping carton, boxes and inserts.
Pelco Manual C585M-B (11/98) 7 2.0 DESCRIPTION The Wiretron digital control system operates over a two-conductor cable and con- trols CCTV equipment such as pan/tilts, enclosures, and motorized zoom lenses from a remote location up to 10 miles (16 km) away .
8 Pelco Manual C585M-B (11/98) 2.1.2 Wiretr on Receiver/Driver Outdoor WX8024RX Wiretron receiver in weatherproof box for 24 VAC pan/tilts with power supply for pan/ tilt, zoom lens, 24 VAC camera pow.
Pelco Manual C585M-B (11/98) 9 3.0 INST ALLA TION The simplest Wiretron system, consisting of the control transmitter and receiver , is shown in Figure 1. Up to 15 control functions are transmitted over the transmission line to the remotely located receiver .
10 Pelco Manual C585M-B (11/98) 3.1 RECEIVER 24 V AC POWER INPUT MODIFICA TION The WX8024RX series receivers can be converted to operate with 24 V AC input. T o convert the receiver , disconnect the receiver circuit board and assembly from the enclosure.
Pelco Manual C585M-B (11/98) 11 Figure 4. 24 V AC Power Input Modification Diagram 1P 6 1P 7 T3 T2 T1 24V P/T 24V CAM 28VCT J6 GND J4 J5 F1 F2 F3 8 9 99 88 J6 J4 J5 66 94V0 9648 J2 J1 J3 1 2 3 4 5 6 7.
12 Pelco Manual C585M-B (11/98) 3.2 MOUNTING 3.2.1 T ransmitter/Contr oller T ransmitter/controllers in the MPT8000 Series are desktop units. Determine the best location for the unit. Proceed to Section 3.2.2, RECEIVER. 3.2.2 Receiver 1. Determine the best location to install the unit.
Pelco Manual C585M-B (11/98) 13 3.3.1.2 Wiring from the Receiver/Driver to the Pan/Tilt 1. Run multi-conductor cable between the receiver/driver and the pan/tilt (refer to Figures 1 and 2.) 2. Assemble the connector parts according to the following instructions.
14 Pelco Manual C585M-B (11/98) Figure 6. Connector Assembly 3. Slide the connector pins into the appropriate holes in the connector body until they snap into place. Refer to Figures 4 and 5 for correct pin arrangement, depending on model and options.
Pelco Manual C585M-B (11/98) 15 Figure 7. Receiver Control Output/Input Pin Assignments 1 4 5 9 15 10 22 16 28 23 33 29 37 34 P1 P2 BRN/W N/C RED/W N/C ORG/W A UX 1 YEL/W N/C GRN/W A UX 4 BLU/W A UX 3.
16 Pelco Manual C585M-B (11/98) 3.3.2 Auxiliary Functions The Wiretron receiver is capable of operating up to four remotely activated auxiliary functions. Each auxiliary output may be individually converted at the receiver for momentary or latching operation.
Pelco Manual C585M-B (11/98) 17 Figure 10. External Device Wiring Diagram Figure 9. Auxiliary Functions Wiring Diagram WIRETRON 1 2 3 8 MANUAL IRIS GROUND WIRETRON RECEIVER/DRIVER 37-PIN CONNECTOR + 1.
18 Pelco Manual C585M-B (11/98) 3.3.3.1 Long Distance Cable Installation Because of the many options available, long distance video wiring is at your discre- tion. Review the following to determine the best method of wiring video for your application.
Pelco Manual C585M-B (11/98) 19 Fiber Optic Cabling Fiber optic transmission of both video and control presents some distinct advantages. Higher quality and longer distance transmission characteristics, inherent noise resistance, greater flexibility for usage, and reduced cabling diameter are but a few of these advantages.
20 Pelco Manual C585M-B (11/98) T able B. Video Coaxial Cable Wiring Distances Cable T ype* Maximum Distance RG59/U 750 ft (229 m) RG6/U 1,000 ft (305 m) RG11/U 1,500 ft (457 m) *Minimum cable require.
Pelco Manual C585M-B (11/98) 21 4.0 OPERA TION In general, all controller operating controls are self-explanatory . All controls, except the ON/OFF power switch, are center-off, spring return switches (momentary on- off-momentary on.
22 Pelco Manual C585M-B (11/98) 5.0 MAINTENANCE Regularly scheduled maintenance is not required. Clean the outer surface of the controller or receiver with a non-abrasive cleaning cloth and antistatic cleaner . Do not use kerosene or similar substances that may damage the surface.
Pelco Manual C585M-B (11/98) 23 6.1 Receiver Pin Assignments Refer to Figure 1 1, Receiver Pin Assignments, when servicing the receiver . Figure 1 1. Receiver Pin Assignments PIN 1 RIGHT PIN PIN 2 LEF.
24 Pelco Manual C585M-B (11/98) 7.0 SPECIFICA TIONS MPT8000 CONTROLLER ELECTRICAL Input Voltage MPT8000CZ: 120 VAC, 60 Hz MPT8000CZ/220: 230 VAC, 60 Hz Power Consumption: 2.
Pelco Manual C585M-B (11/98) 25 GENERAL Construction and Finish: Black polyester powder coated steel Operating T emperature: 32 ° to 120 ° F (0 ° to 49 ° C) Dimensions: See Figure 12 Weights Unit Shipping MPT8000CZ 7.5 lb (3.36 kg) 8 lb (3.62 kg) MPT8000CZ/220 7.
26 Pelco Manual C585M-B (11/98) Connectors Receiver Input: 3-contact terminal block Receiver Output: 37-pin AMP CPC for control output (mate supplied) Fuse Protection WX8024RX, Fuse 1: Not used WX8024.
Pelco Manual C585M-B (11/98) 27 Figure 13. WX8000 Series Receiver Dimension Drawing (Outdoor Models) Figure 14. WX8000 Series Receiver Dimension Drawing (Indoor Models) NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES 9.
28 Pelco Manual C585M-B (11/98) 8.0 W ARRANTY AND RETURN INFORMA TION Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. Endura and ExSite are trademarks of Pelco. © Copyright 1999, Pelco. All rights reserved.
An important point after buying a device Pelco WX8000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco WX8000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco WX8000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco WX8000 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco WX8000 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco WX8000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco WX8000.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco WX8000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco WX8000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
