Instruction/ maintenance manual of the product 9300 Patton electronic
Go to page of 8
OnSite Models 9100, 9200, & 9300 Expansion Modules Quick Star t Guide Part Number: 07M9000-QS, Rev . A Revised: November 20, 2009 Sales Office: +1 (301) 975-1000 T echnical Support: +1 (301) 975-1007 E-mail: support@patton.
2 OnSite Expansion Modules Quick Start Guide 1.0 Introduction This guide provides instructions for adding expansion modules to your Patton OnSite base system. Refer to the following sections for installation instructions for your specific module: • 2.
OnSite Expansion Modules Quick Start Guide 3 2.2 Cable Management The HD-E1 module uses a future bus connector on the front panel and requires the use of cables with compatible plugs for access to the E1 signals.
4 OnSite Expansion Modules Quick Start Guide 2.3 Getting Started After the module is securely installed to the chassis (using the mounted screws on the front panel), turn the power back on to the S1000 system.
OnSite Expansion Modules Quick Start Guide 5 3.2 Getting Started The HD-ENET module supports insertion into or removal from any available expansion slot on the OS1052 and OS1063 chassis while the system is powered on and carrying traffic.
6 OnSite Expansion Modules Quick Start Guide 4.1 Unpacking and Installation T o install the 2-port STM-1 module, follow the procedures in Chapter 10 of the OnSite Series Administrator’ s Ref- erence Guide . Figure 1 shows the alignment and insertion of the module into one of the available expansion slots of a modular OS-10 Series platform.
OnSite Expansion Modules Quick Start Guide 7 5.0 Additional Information Refer to the OnSite Series Getting Started Guide and the OnSite Series Administrator’ s Reference Guide located on the CD-ROM shipped with your device for detailed instructions .
8 OnSite Expansion Modules Quick Start Guide NOTES ____________________________________________________________________ ____________________________________________________________________ ___________.
An important point after buying a device Patton electronic 9300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronic 9300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronic 9300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronic 9300 you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronic 9300 will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronic 9300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronic 9300.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronic 9300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronic 9300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
