Instruction/ maintenance manual of the product PLP 100 A1 Parkside
Go to page of 18
SOLDERING GUN PLP 100 A1 SOLDERING GUN Operation and Safety Notes 6.
GB / IE Operation and Safety Notes Page 5 Before reading, unfold the page containing the illustrations and familiarise y ourself with all functions of the device.
1 2 3 4 5 6 10 7 8 9 1.
.
5 GB/IE Table of contents Introduction Prop er use .............................................................................. Page 7 Des cr ipt ion of p ar t s and f eat ures ......................................... Pag e 7 Inc lude d ite ms ....
6 GB/IE Introduction The following pictograms are used in t hese operating instructions / on the device: Read instruction manual! Obser ve caution and safety notes! Caution – electric shock! Danger .
7 GB/IE Introduction Soldering gun PLP 100 A1 Introduction Please mak e sure y ou familiarise yourself fully with the w ay the device w orks before y ou use it for the first time and that you understand ho w to handle it correctly . Please read the operating instructions belo w .
8 GB/IE Introduction 3 Soldering light 4 ON / OFF switch 5 Handle 6 Mains lead 7 Cutting tip 8 Tin solder 9 Open spanner 10 Solder flux Included items 1 Soldering gun PLP 100 A1 1 Carr y case 2 S.
9 GB/IE Safet y advice CA UT ION! Failur e to obser ve the instructions and advice giv en below may r esult in electric shock, fire and / or serious injur y . 1. W orkplace safet y a) Keep you r wo rk in g a re a c le a n an d wel l l i t. Untidy or poorly lit working areas can lead to accidents.
10 GB/IE Safety advice ronment is una voidabl e. The use of an R CD reduces the risk of electric shock. d) Do not use the mains lead for any purpose for which it was not intended, e.g. to carr y t he device, to hang up the device or to pull the mains plug out of t he mains socket.
11 GB/IE Safety advice Never touc h the hot soldering tip or the molten solder . Y ou could suf fer burn injuries. Always let the device cool before you r eplace components on the device, clean it or check its condition. After use let the soldering gun cool down in air only .
12 GB/IE Safety advice / Use 4. Careful handling and use of electrical pow er t ools a) Wh e n no t in u se a l ways e ns ur e t h at e l ec t r ic al p ower to ol s ar e kep t ou t of r ea c h o f ch i ld r en .
13 GB/IE Swi tc h i ng o f f : Release the ON / OFF switch 4 . Pause: At least 48 seconds CA UT ION! Never heat up the de vice if it is not fitted with a sol- dering tip. AT T E N T I O N ! Never use in continuous operation mode. The flo w of electrical current contr ols the delivery of soldering heat.
14 GB/IE Maintenance and cleaning WARNING! RISK OF IN JUR Y! Befor e you carry out any work on the device alw ays pull the mains plug out of the mains socket and allow the de vice to cool. Clean the device after you have finished using it. Use a cloth and a little mild detergent for cleaning the de vice.
15 GB/IE The warranty covers only claims for material and maufacturing defects, but not for transport damage, f or wearing parts or for damage to frag- ile components, e.g. buttons or batteries. This product is for priv ate use only and is not intended for commercial use.
16 GB/IE Disposal / Declaration of Conformity / Manufacturer Disposal The pack aging is wholly composed of envir onmentally- friendly materials that can be disposed of at a local recy cling centre.
17 GB/IE Declaration of Conformity / Manufacturer Applicable har monized standards EN 55014-2/A1:2001 EN 55014-1:2006 EN 60335-2-45/A1:2008 EN 60335-1/A13:2008 EN 61000-3-2:2006 EN 61000-3-3/A2:2005 E.
IAN 61101 KOMPERNASS GMBH Burgstraße 21 D-44867 Bochum © by ORFGEN Mark eting Last Information Update: 12 / 2010 Ident.-No.: PLP100A1122010-6 6.
An important point after buying a device Parkside PLP 100 A1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Parkside PLP 100 A1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Parkside PLP 100 A1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Parkside PLP 100 A1 you will learn all the available features of the product, as well as information on its operation. The information that you get Parkside PLP 100 A1 will certainly help you make a decision on the purchase.
If you already are a holder of Parkside PLP 100 A1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Parkside PLP 100 A1.
However, one of the most important roles played by the user manual is to help in solving problems with Parkside PLP 100 A1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Parkside PLP 100 A1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center