Instruction/ maintenance manual of the product 96531 Chicago Electric
Go to page of 15
DIGIT AL SOLDERING ST A TION Model 96531 SET UP AND OPERA TING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally . Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed Exclusively by Harbor Freight T ools 3491 Mission Oaks Blvd.
Page 2 SKU 96531 For technical questions, please call 1-800-444-3353. CONTENTS IMPORT ANT SAFETY INFORMA TION ............................ 3 GENERAL SAFETY RULES ................................................. 3 Work Area ...........................
Page 3 SKU 96531 For technical questions, please call 1-800-444-3353. SA VE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures.
Page 4 SKU 96531 For technical questions, please call 1-800-444-3353. GENERAL SAFETY RULES W ARNING! Read all instructions Failure to follow all instructions listed below may result in electric shock, re, and/or serious injury .
Page 5 SKU 96531 For technical questions, please call 1-800-444-3353. Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, heavy-duty work gloves, hard hat, or hearing protection used for appropriate conditions will re- duce personal injuries.
Page 6 SKU 96531 For technical questions, please call 1-800-444-3353. SPECIFIC SAFETY RULES Maintain labels and nameplates on the tool. These carry important safety infor- mation. If unreadable or missing, contact Harbor Freight T ools for a replacement.
Page 7 SKU 96531 For technical questions, please call 1-800-444-3353. before use. If the plug will not t the outlet, have a proper outlet installed by a qualied electrician. Grounded T ools: T ools with Three Prong Plugs T ools marked with “Grounding Required” have a three wire cord and three prong grounding plug.
Page 8 SKU 96531 For technical questions, please call 1-800-444-3353. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and possible tool damage.
Page 9 SKU 96531 For technical questions, please call 1-800-444-3353. Symbology Double Insulated V~ V olts Alternating Current Canadian Standards Association A Amperes Underwriters Laboratories, Inc. n 0 xxxx/min. No Load Revolutions per Minute (RPM) SPECIFICA TIONS Electrical Requirements 120 V~ / 60 Hz, .
Page 10 SKU 96531 For technical questions, please call 1-800-444-3353. Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. Assembly Match up holes in Plug (27) to pins in Cord Connection (6), plug in, and secure with Cord Retainer (26).
Page 1 1 SKU 96531 For technical questions, please call 1-800-444-3353. Place Handle in the Handle Rest (black socket) and wait 20 seconds until Solder- ing T ip heats up. W ork piece set up If wires are to be soldered, thoroughly clean and scrape the wires so that only the clean copper is showing.
Page 12 SKU 96531 For technical questions, please call 1-800-444-3353. Check to be sure the objects being joined will not be damaged by the heat of soldering. This tool generates a temperature up to 896°F . T est a scrap piece or inconspicuous area of your work piece with the soldering tip before proceeding.
Page 13 SKU 96531 For technical questions, please call 1-800-444-3353. (4), and unplug the tool from its electrical outlet before performing inspection, maintenance, or cleaning procedures. Damaged equipment can fail, causing personal injury . Do not use damaged equipment.
Page 14 SKU 96531 For technical questions, please call 1-800-444-3353. P ARTS LIST & ASSEMBL Y DIAGRAM Part Description Qty 1 Upper Cover 1 2 Base 1 3 Panel 1 4 Power Switch 1 5 LCD Display 1 6 Co.
Page 15 SKU 96531 For technical questions, please call 1-800-444-3353. LIMITED 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durabili.
An important point after buying a device Chicago Electric 96531 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chicago Electric 96531 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chicago Electric 96531 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chicago Electric 96531 you will learn all the available features of the product, as well as information on its operation. The information that you get Chicago Electric 96531 will certainly help you make a decision on the purchase.
If you already are a holder of Chicago Electric 96531, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chicago Electric 96531.
However, one of the most important roles played by the user manual is to help in solving problems with Chicago Electric 96531. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chicago Electric 96531 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
