Instruction/ maintenance manual of the product C/DP-2000 Parasound
Go to page of 11
-1- O W N E R ' S M A N U A L C / D P - 2 0 0 0 Ultra B e l t D r i v e C D P l a y e r C/DP-2000 Ultra Compact Disc Player C/DP-2000 Ultra Compact Disc Player P o w e r Power S e a r c h Search .
-2- Table of Contents Important Safety Instructions ......................................................................................... 3 C/DP-2000 Ultra Front and Rear Panel Drawings .......................................................... 4 Introduction .
-3- IMPORTANT SAFETY INSTRUCTIONS The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of “dangerous voltage” inside the product that may constitute a risk of electric shock.
-4- C/DP-2000 Front and Rear Panel Drawings Analog Outputs 75 Ohm Digital Output External Remote Input Balanced Left Channel Right Channel Unbalanced Unbalanced Balanced CAUTION RISK OF ELECTRIC SHOCK.
-5- Introduction Congratulations on your purchase of this precision audio component and thank you for your selection of Parasound. The C/DP-2000 Ultra's unique patented CD Belt Drive design delivers analog-like musicality unavailable in other compact disc players.
-6- Making Connections to your C/DP-2000 Ultra Before making any connections, turn off the power to your preamplifier and power amplifier. Once the inputs have been connected, plug the AC cord into any convenient outlet.
-7- Operating Your C/DP-2000 Ultra Loading Discs To load a disc, gently slide the plexiglas door open. Remove the disc clamp and place it on the convenient clamp pad on the top of the chassis. Next, load the disc onto the spindle, label side up, and gently place the disc clamp on top of the disc.
-8- Remote Control Handset The Remote Control Handset duplicates all front panel functions except power on/off. It also contains several additional functions.
-9- HDCD Indicator If the loaded disc is encoded in High Definition Compatible Digital (HDCD) the green LED on the front panel will illuminate once the C/DP-2000 recognizes the HDCD bitstream.
-10- C/DP-2000 Ultra Specifications Frequency Response 3 Hz-20 kHz, ± 0.2 dB Signal to Noise Ratio > 110 dB, IHF A Dynamic Range > 102 dB Channel Separation > 115 dB, 1 kHz Low Level Linearity ± 1.5 dB down to -96 dB Analog Line Output Level 2 V RMS, ± 0.
-11- © 1999 Parasound Products, Inc. Parasound Products, Inc. 950 Battery Street, San Francisco, CA 94111 415-397-7100 / FAX 415-397-0144 www.parasound.
An important point after buying a device Parasound C/DP-2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Parasound C/DP-2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Parasound C/DP-2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Parasound C/DP-2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Parasound C/DP-2000 will certainly help you make a decision on the purchase.
If you already are a holder of Parasound C/DP-2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Parasound C/DP-2000.
However, one of the most important roles played by the user manual is to help in solving problems with Parasound C/DP-2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Parasound C/DP-2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
