Instruction/ maintenance manual of the product WJ-NT304 Panasonic
Go to page of 20
Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. LINK RCV SND OPERATE Network Interface Unit WJ-NT304 Network Interface Unit Operating Instructions Model No.
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CARE- FULLY. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5 amp and that it is approved by ASTA or BSI to BS1362.
3 The serial number of this product may be found on the sur- face of the unit. You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft.
4 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
5 Limitation of Liability THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WAR- RANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WAR- RANTIES OF MERCHANTABILITY, FITNESS FOR ANY PAR- TICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT.
6 Preface Features Network Interface Unit WJ-NT304 is designed to capture images from analog cameras and compress the images in JPEG or MPEG-4 files. By connecting to a network (LAN) or the Internet, images and audio from the camera can be monitored on a PC via a network.
7 There are 2 sets of operating instructions for the WJ-NT304 as follows. • Installation Guide (book, these operating instructions) • Network operating instructions (PDF) The "Installation Guide" contains descriptions of how to install and connect this unit, and how perform the required network se t- tings.
8 As you will use this product connected to a network, your attention is called to the following security risks. 1. Leakage or theft of information through this product 2.
9 CONTENTS Important Safety Instructions ................................................................................................. ..................... 4 Limitation of Liability ................................................................
10 Precautions • Do not block the ventilation opening or slots on the cover. To prevent the apparatus from overheating, place it at least 5 cm {2 inches} away from the wall. • Do not drop metallic parts through slots. This could permanently damage the apparatus.
11 MPEG-4 Visual patent portfolio license This product is licensed under the MPEG-4 Visual patent portfolio license for the personal and non-commercial use of a consumer for (i) encoding video in comp.
12 Major Operating Controls and Their Functions LINK RCV SND OPERA TE Network Interface Unit WJ-NT304 WJ-NT304 w q F ront cover e u y r t q Operation Indicator (OPERATE) This LED will light when the power is on. Important: • The LED will blink for around 2 minutes until the unit becomes ready to operate.
q Video input connectors 1 to 4 (VIDEO IN 1 to 4) (BNC, 75 Ω , with auto termination) These connectors accept video input signals from cam- eras or recorders. w Video output connectors 1 to 4 (VIDEO OUT 1 to 4) (BNC, loop-thru) These connectors loop thru video input signals sup- plied to VIDEO IN connectors 1 to 4.
14 Rack Mounting Remov e the rubber feet. z Remove the rubber feet (4 pcs.) on the bottom of the unit. x Install the rack mounting brackets (Option: Refer to the following.) on both sides of the unit. Using the mounting screws (4 pcs.) for the rack mounting brackets, fix them firmly.
■ When connecting to a network using a PoE device (hub) <Required cable> LAN cable (category 5 or better, straight) ■ When connecting with a PC directly <Required cable> LAN cable (category 5 or better, cross) Important: • Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX.
c Insert an SD memory card into the SD memory card slot. v Attach the cover and tighten the screw. b Close the front cover. 16 z Open the front cover. x Detach the SD memory card slot cover by loosening the screw.
17 Configure the Network Settings ■ Install the software Before installing the software, read the readme file on the provided CD-ROM first. ● Software included on the provided CD-ROM • Panasonic IP Setup Software Configure the network settings of the unit.
Check if the DC plug of AC adapter is properly inserted into the DC IN jack of this monitor. Check if the power cord is properly inserted into the AC adapter.
19 Specifications ■ Network Interface Unit Power source: 12 V DC, 1.0 A (using the supplied AC adapter) Power consumption: Approx. 12 W Ambient temperature: –10 °C to +50 °C {14 °F to 122 °F}*.
Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste.
An important point after buying a device Panasonic WJ-NT304 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic WJ-NT304 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic WJ-NT304 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic WJ-NT304 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic WJ-NT304 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic WJ-NT304, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic WJ-NT304.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic WJ-NT304. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic WJ-NT304 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
