Instruction/ maintenance manual of the product SC-HC30 Panasonic
Go to page of 16
RQTX1073-2L GN Operating Instructions Compact Stereo System Model No. SC-HC30 Dear customer Thank you f or purchasing this product. Before connecting, oper ating or adjusting this product, please read the instructions completely . Please k eep this manual f or future reference.
RQTX1073 2 or “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.
RQTX1073 Supplied accessories 3 Connections 3 Attaching the unit to a wall (Optional) 4 Control guide 7 Disc operations 8 Radio operations 10 Timer 11 Sound adjustment 11 External unit 12 Troubleshoot.
RQTX1073 4 Attaching the unit to a wall (Optional) Notes on installation g Before installation, read the “Safety precautions” and “Wall mount instructions” for correct installation. g For optimal performance and to prevent potential problems, do not install this unit: at locations other than vertical walls.
RQTX1073 1. Detach the stand from the unit. 3. Drive the mounting screws into the wall. AUX 2. Attach the wall bracket to the back of the unit. 2 1 300 mm Space required Rear View Space required 85.
RQTX1073 5. Install the safety holder. Fix the safety holder onto the wall bracket. Drive safety holder screw to secure the safety holder onto the wall. 4. Hang the unit on the wall. 6 g Fall-preventive measure (Optional) Removing the unit from the wall Remove safety holder screw and the safety holder.
RQTX1073 Refer to the numbers in parentheses for page reference. • Remote control Main unit Top View Control guide 8 9 10 11 12 6 7 Standby/on switch [ ^ ], [ 8 ] (8, 11, 14) Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.
RQTX1073 g Inserting a disc Press [ ^ ] to turn the unit on. Press [ ; , CD] to open the sliding door. Stop Press [ g ] . Pause Press [CD q / h ] . Press again to resume play. Skip track Press [ u / t ] or [ y / i ] . Search the current track (CD) Press and hold [ u / t ] or [ y / i ] .
RQTX1073 Press [DISPLAY, –DIMMER] repeatedly during play or pause to view the current track’s information. Maximum number of displayable characters: approximately 30 This unit supports ver. 1.0 and 1.1 ID3 tags. Text data that is not supported will not be displayed.
RQTX1073 Press [RADIO] to select “FM” or “AM”. Press [TUNE MODE] to select “MANUAL”. Press [ u / t ] or [ y / i ] to select the frequency of the required station. “ ST ” is displayed when a stereo FM broadcast is being received.
RQTX1073 Preset EQ Press [PRESET EQ] repeatedly to select “HEAVY”, “SOFT”, “CLEAR”, “VOCAL” or “FLAT”. Bass or Treble Press [BASS/TREBLE] repeatedly to select “BASS” or “TREBLE”. Press [ e , r ] to adjust the level (-4 to +4).
RQTX1073 12 Enjoying audio from iPod or iPhone g Inserting an iPod/iPhone Press [ ; , iPod] to open the sliding door. Insert the suitable dock adapter (not included) for the iPod/iPhone. Insert the side of the iPod/iPhone dock adapter with the clips facing towards you first and then push the opposite side until it clicks into place.
RQTX1073 The remote control and main unit are factory-set to “REMOTE 1” mode. If you find the remote control unintentionally also controls other equipment, you can switch to operate in “REMOTE 2” mode. To switch to “REMOTE 2” mode (by main unit only) Press and hold [AUX] and then press [2] until “REMOTE 2” is displayed.
RQTX1073 14 Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, consult your dealer for instructions. Troubleshooting guide g Common problems Incorrect display or play will not start You have not inserted the disc properly.
RQTX1073 15 Specifications g AMPLIFIER SECTION RMS Output Power Front Ch (both ch driven) 20 W per channel (6 Ω ), 1 kHz, 10 % THD Total RMS power 40 W Phone jack Terminal Stereo, 3.5 mm jack Output level (CD, 1 kHz, -20 dB) max. 0.2 mW + 0.2 mW, 32 Ω Aux (Rear) Terminal Stereo, 3.
RQTX1073-2L H0210HU2050 En Panasonic Corporation Web Site: http://panasonic.net © Panasonic Corporation 2010.
An important point after buying a device Panasonic SC-HC30 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic SC-HC30 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic SC-HC30 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic SC-HC30 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic SC-HC30 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic SC-HC30, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic SC-HC30.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic SC-HC30. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic SC-HC30 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
