Instruction/ maintenance manual of the product 98RV1 Panasonic
Go to page of 10
KeyMaster - - your your codefree solution codefree solution Installation manual 98RV1 Panasonic DVD-RV60 2000 HW-Parts HW-Parts & StoneDesign.
1.1 - Pla yers . These installation instructions covers the installation of the Key - Master for DVD players manufactured by: Kenwood DVD3030 Panasonic RV-20 Panasonic RV-40 Panasonic RV-60 Panasonic SA-PM08 Yamaha DVD-S796 Yamaha DVD-S796 www.stonedesign.
2.1 - Disclaimer! Read this throroughly . Before installing the KeyMaster which is able to make your DVD player codefree, you should read through these warnings thoroughly: v We are not responsible for any illegal use of the KeyMaster . v We offer no warranty on your DVD-player.
3.1 - Removal of the top cover. It is necessary to remove the frontcover of the tray. First, open the tray by pressing " OPEN " on the player or the remote control. Then, pu ll the bottom of the frontcover of the tray forward and si m u l taneli - ty carefully pull it upwards.
continu ed... To remove the mechanism, use the following procedure: Ÿ Disconnect the cables connected to the frontpanel of the player. Ÿ Remove the frontpanel by loosening the seven snap-locks. Please be aware that the bottom chassis can have very sharp edges.
3.2 - Installing the KeyMaster. When the mechanism is removed it is possible to install the Key - Master . fig. 4. Fig. 4 Seven wires have to be soldered onto the MPEG board (which are attached to the mechanism). All seven wires have to be soldered onto the bottomside of the MPE G board .
3.2 - Continued . à Connect the RED wire to the testp oint TP6209. à Connect the BLACK wire to the testp oint TP6201. à Connect the B RO WN wire to the testpoint TP6204 or pin 2, IC6 303 . à Connect the W HITE wire to the testpoint TP6202 or pin 6, IC6 303 .
3.3 - Installation in the Panasonic SA-PM08 . In the Panasonic SA-PM08 the installation has to done as follows: à Connect the RED wire to C6501 (+) . à Connect the BLACK wire to the C6501 (-) . à Connect the B RO WN wire to the shown testpoint TP6204 or pin 2, IC6 303 .
3.3 - Securing KeyMaster . Before fastening the KeyMaster the wires have to be fixed with a cable tie. Use the cable tie as shown on fig. 9 . Fix the wires so they are not located underneath the chassis of the mechanism . Fig. 9 Note : the picture shows a Panasonic DVD-RV60.
3.4 - Assembling the player. Assembling the player is done using the following procedure: Ê Use the four screws to attach the mechanism. Ë Press the cables from the frontpanel into their sockets. Ì Attach the front of the player again. Then ensure all snap- locks.
An important point after buying a device Panasonic 98RV1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic 98RV1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic 98RV1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic 98RV1 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic 98RV1 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic 98RV1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic 98RV1.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic 98RV1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic 98RV1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
