Instruction/ maintenance manual of the product 3498 Palsonic
Go to page of 13
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 34CM CORDLE.
. This equipment has been designed and manufactured to meet the highest international standards, but, like any electrical apparatus which is operated at mains voltage, care must be taken if you are to obtain the best results and safety is to be assured.
INSIDE THE PRESET DOOR STAND BY CHANNEL SELECTOR PREVIOUS CALL PICTURE/TIME MUTE CHANNEL SELECTOR VOLUME CONTROL TIME PICTURE SLEEP TV/AV TIMER 2 PRESET DOOR POWER SWITCH SPEAKER REMOTE SENSOR LED IND.
INSTALLING BATTERIES: 1. Remove the battery cover of Remote Control Unit. 2. Insert two "AA" 1.5V batteries making sure the polarity (+ or -) of the batteries matches the polarity marks inside the unit.
Use the CHANNEL SELECTOR button on the Remote Control Unit to select channel 1) 0-9 channel 2) 10-19 channel 3) 20-29 channel 4) 30-39 channel 5) 40-49 channel 6) 50-59 channel 4 .
5 1. Press the PSET (PRESET ON/OFF) button on the front panel. The current band and channel position will be displayed on screen (in green). 2. Press AUTO (AUTO PRESET) button, the appliance will search the signal of TV station in the order of VHFL, VHFH and UHF, as shown in the following, and memorise them from channel number 1 position.
6 SKIP BUTTON: FUNCTION: When CHANNEL SELECTOR button is used to select channels, the channel will be skipped if they are set to "SKIP" mode. For example: Set 2~7 channels to "SKIP" mode, the procedure of channel position increasing or decreasing.
Press STAND BY button, the appliance is set to stand by mode, the power indicator is lightened. Press STAND BY button again, the appliance is turned on and the indicator is turned off. 7 AM 6 : 00 Press the PICTURE CONTROL button on the Remote Control Unit.
SLEEP BUTTON (REMOTE CONTROL UNIT) Using SLEEP button allows you to have the appliance automatically turned off a predetermined time, and set the appliance to stand by mode. After the SLEEP function is set, the remaining time will be automatically displayed for 4 seconds every ten minutes.
5. Press TIME button, the CLOCK indicator is green instead of red ON TIME function starts operating. Then press STAND BY button to set stand by mode. 6. The appliance will be turned on automatically when the clock reaches your setting time. * The ON TIME operation will be cancelled if you switch off the power before your setting time is up.
TROUBLE SHOOTING GUIDE Many apparent malfunctions may be caused by slight misadjustment of regular controls or some other equally similar simple causes. If any problem arises in the operation of your set, first check through this list of symptoms and correction.
SPECIFICATIONS: Colour System Scanning Receivers Channel Cable Channel IF Frequency Inter Carrier Frequency Power supply CRT Audio Output Antenna Impedance Dimension (mm) Weight Remote Control Unit Power Supply * Design and specifications are subject to change without notice.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-37823-.
An important point after buying a device Palsonic 3498 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Palsonic 3498 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Palsonic 3498 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Palsonic 3498 you will learn all the available features of the product, as well as information on its operation. The information that you get Palsonic 3498 will certainly help you make a decision on the purchase.
If you already are a holder of Palsonic 3498, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Palsonic 3498.
However, one of the most important roles played by the user manual is to help in solving problems with Palsonic 3498. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Palsonic 3498 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
