Instruction/ maintenance manual of the product 2418 Palsonic
Go to page of 14
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 24CM AC/DC .
. This equipment has been designed and manufactured to meet the highest international standards, but, like any electrical apparatus which is operated at mains voltage, care must be taken if you are to obtain the best results and safety is to be assured.
ANT . PLUG MUTE CHANNEL SELECTOR ( ) VOLUME CONTROL ( ) SLEEP PICTURE PICTURE/TIME ( ) TIMER TIME CALL PREVIOUS CHANNEL SELECTOR ST AND BY IR RECEIVER INDICA TOR CONTROL BOARD FUSE ANT IN VIDEO IN AUD.
INSTALLING BATTERIES : * Take care not to drop, dampen, disas- 1. Remove the battery cover of Remote semble the Remote Control Unit. Control Unit. * Operatable remote control range is 2. Insert two "AAA" 1.5V batteries making limited as shown.
Use the CHANNEL SELECTOR button on the Remote Control Unit to select channel. DC POWER SUPPLY: Be sure the DC power supply is 12V- 14V, attach the plug of DC power cord to the DC socket on the back of the cabinet. The set will be in stand by mode, the power indicator is red.
llllllllllllll 1. Press the PSET (PRESET ON/OFF) button on the front panel. The current band and channel position will be displayed on screen (in green).
0 1 2 58 59 SKIP BUTTON: FUNCTION: When CHANNEL SELECTOR button is used to select channels, the channel will be skipped if they are set to "SKIP" mode. For example: Set 2~7 channels to "SKIP" mode, the procedure of channel position increasing or decreasing.
Press stand by button( ) on the appliance or the Remote Control Unit, the power indicator is red, the appliance is set to stand by mode. Press stand by button ( ) again, the appliance is turned on and the indicator is green. 8 AM 6 : 00 Press the PICTURE CONTROL button on the Remote Control Unit.
SLEEP BUTTON (REMOTE CONTROL UNIT) Using SLEEP button allows you to have the appliance automatically turned off a predetermined time, and set the appliance to stand by mode. After the SLEEP function is set, the remaining time will be automatically displayed for 4 seconds every ten minutes.
5. Press TIME button, the CLOCK indicator is green instead of red ON TIME function starts operating. Then press STAND BY button to set stand by mode. 6. The appliance will be turned on automatically when the clock reaches your setting time. * The ON TIME operation will be cancelled if you switch off the power before your setting time is up.
the upper comer of the screen for 4 seconds. Press AV/TV button again to return TV mode, the original channel will be displayed in the upper right comer of the screen.
. TROUBLE SHOOTING GUIDE Many apparent malfunctions may be caused by slight misadjustment of regular controls or some other equally similar simple causes. If any problem arises in the operation of your set, first check through this list of symptoms and correction.
SPECIFICATIONS : AC power adapter Power input Power output Dimension (W x H x D) Weight Car Battery Cord Remote Control Unit Power Supply : PAL/BG : DC 12V : VHFL 2-4; VHFG 5-12; UHF 28-61 : S1-S2 : 25cm : 0.7W Max. : VHF/CATV/UHF 75 ohm : 265 x 235 x 305 (mm) : 4.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-10203-.
An important point after buying a device Palsonic 2418 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Palsonic 2418 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Palsonic 2418 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Palsonic 2418 you will learn all the available features of the product, as well as information on its operation. The information that you get Palsonic 2418 will certainly help you make a decision on the purchase.
If you already are a holder of Palsonic 2418, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Palsonic 2418.
However, one of the most important roles played by the user manual is to help in solving problems with Palsonic 2418. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Palsonic 2418 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
