Instruction/ maintenance manual of the product 22-PS245 Pacific Cycle
Go to page of 11
Summerland Swing Set Owner’s Manual and As sembly Instr uc tion Model #: 22-PS245 Mode l Name: Summerland Swing Set Manual revision: 4/2006 Important: Keep this owner’s manu al; do not discard in case you need to contact Pacific Cycle, Inc. in the future.
2 © 2006 Pacific Cycle, Inc. To make claim under warranty, notificatio n of such defect must be given to Pacific Cycle, Inc. By calling the phone number below, you will be instructed on how the product or part needing replacem ent should be s hipped postpa id to Pacific Cycle, Inc.
3 © 2006 Pacific Cycle, Inc. • E QUIPMENT MAY BE SLIPPERY WHEN WET . D O NOT ALLOW CHILDREN TO USE THE EQUIPMENT WHEN WET . • P ARENTS SHOULD REGULARLY CHECK OPENING S AND SURFACES , SUCH AS SLIDES , FOR ITEMS THAT MAY BE HAZARDOUS . • P ARENTS SHOULD CHECK SWING CHAINS TO INSURE THEY ARE SECURE AND CAN NOT BE LOOPED BACK ON T HEMSELVES .
4 © 2006 Pacific Cycle, Inc. FALL HEIGHT IN FEET FROM WHICH A LIFE THREATENING INJ ULY WOULD NOT BE EXPECTED Material Ty pe 6 in. dept h 9 in. 12 in. Double Shredded Bark Mulch 6’ 10’ 11’ Wood .
PARTS LIST FOR SWING SET Main Frame N a m e E a c h Top Bar with Corner Fitting s and Hooks 2 L e g 6 Support Bar 3 Glider 5 © 2006 Pacific Cycle, Inc.
Pre-Assembled Parts: • Corner fittings should be attached to the top bar. • Swing hooks should be in place on the top bar. • Hardware for the legs should be in p lace in the corner fitting prongs. • Hardware for the support bars should be in place on the legs.
NOTE: One sup port bar ha s holes for the slide attachment. The holes shou ld be positioned toward the front of th e swing set. GLIDER ASSEMBLY Required Parts: Vertical Poles x2 (Footrests attached) Horizontal Poles x2 (Seats att ached) Glider attachment x1 Pre-Assembled Parts: • The seats should be attached to the hor izontal poles.
NOTE: The curved portio n of the pole is the top and it shou ld face the inside of the swing frame. 3 Connect the two horizontal p oles (must first be disassem bled from the seats) to the two verti cal poles using t he hardware provided. Be sure th at the plastic bushing s are between the vertical poles and horizontal pol es.
2 Check the lock nut and bolt on th e swing seat to make sure that they are secure . Part Ref. #: PSSH11, PSHW13 SLIDE ASSEMBLY Required Parts: Slide x1 Rail/Ladder Leg x2 Front Leg x1 Ladder Step x2 .
2 Insert the rail/ladder legs throu gh the holes in the top of the slide. Align th e ladd er holes with the slide holes. 3 Insert the screws through the holes in the back of the slide and secure th em to the hand rails with the screws and lock ing nuts provided.
IMPORTANT LAST STEPS! TIGHTEN ALL HARDWARE. Do no t allow children to play on the swing set un til it is fully asse mbled, all items are tightened, and the unit is pr operly anchor ed. • Do not over tighten nuts and bo lts. Once th ey are tight, tu rn them ½ rotation more to be sure they are secure.
An important point after buying a device Pacific Cycle 22-PS245 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pacific Cycle 22-PS245 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pacific Cycle 22-PS245 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pacific Cycle 22-PS245 you will learn all the available features of the product, as well as information on its operation. The information that you get Pacific Cycle 22-PS245 will certainly help you make a decision on the purchase.
If you already are a holder of Pacific Cycle 22-PS245, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pacific Cycle 22-PS245.
However, one of the most important roles played by the user manual is to help in solving problems with Pacific Cycle 22-PS245. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pacific Cycle 22-PS245 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
