Instruction/ maintenance manual of the product SAN S2000 Overland Storage
Go to page of 6
10400276-003 06/2010 ©2010 Overland Storage, Inc. Page 1 of 6 SnapServer ® SAN S2000 Quick Start Guide Overview This document describes how to unpack an SnapServer SAN S2000 appliance from Overland Storage and in stall it into a four-post, 32-inch depth, EIA-31 0 rack.
10400276-003 06/2010 ©2010 Overland Storage, Inc. Page 2 of 6 c. Release and slide the middle member back into the outer member. Figure 3. Inner Rail Release Latch 3. Attach the right inner member ( Figure 4 ): Figure 4. Attach Inne r Rail Member to E2000 a.
10400276-003 06/2010 ©2010 Overland Storage, Inc. Page 3 of 6 Figure 8. Using the Early Round-Hole Adaptors 3. Using the screw s from the kit, secure the front of the rail to the rack. 4. Slide the rear ra il segment rearward until the rear adaptor holes are in line with holes being used.
10400276-003 06/2010 ©2010 Overland Storage, Inc. Page 4 of 6 • Overland recommends grouping columns of drives of the same speed next to each other when possible. Installing Drives NO TE: Do not remov e the disk drives from their carriers. Doing so voids the driv e warranty .
10400276-003 06/2010 ©2010 Overland Storage, Inc. Page 5 of 6 To turn the appliance ON , press and hold the Power button ( Figure 16 ) for no more than one (1) second to begin the power-up sequence. Figure 16. Front Panel Controls and Indicators After you turn the power ON, the System performs a self- test process, wh ich takes a few minutes .
10400276-003 06/2010 ©2010 Overland Storage, Inc. Page 6 of 6 Additional Information User Guide For detailed information on c onfiguring your SAN S2 000, refer to the SnapServer SAN S2000 Us er Guide . It is available onli ne at: http://support.overlandstorage.
An important point after buying a device Overland Storage SAN S2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Overland Storage SAN S2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Overland Storage SAN S2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Overland Storage SAN S2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Overland Storage SAN S2000 will certainly help you make a decision on the purchase.
If you already are a holder of Overland Storage SAN S2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Overland Storage SAN S2000.
However, one of the most important roles played by the user manual is to help in solving problems with Overland Storage SAN S2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Overland Storage SAN S2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
