Instruction/ maintenance manual of the product WMR200 Oregon Scientific
Go to page of 11
1 EN Professional Weather Center Model: WMR200 / WMR200A USER MANUAL CONTENTS Introduction .............................................................................................................. 1 Packaging Contents ............................
2 EN ASSEMBLY PARTS 1x V ertical Attachment Bracket 1 x Cone-Shaped End 1 x Horizontal Attachment Bracket 1 x Bottom Pole 1 x Mid Pole 1x T op Pole 2 x Round U- bolts 2 x Rectangular Base Legs 3 x Eye.
3 EN 4. Indicates pressure alarm is ON 5. User selectable altitude / pressure measurement unit RAINFALL 1 5 6 7 8 2 3 4 1. 0 (current) to – 24 hours rainfall record / 2. Accumulated total rainfall (refer to SINCE date stamp in clock area for further details) 3.
4 EN WIND SENSOR 2 3 4 1 1. Wind Direction 2. Wind vane casing 3. Anemometer 4. Solar power socket RAIN GAUGE Base and funnel: 1 2 3 1. Rain Gauge 2. Battery compartment 3. RESET button 1 2 1. Funnel 2. Indicator OUTDOOR TEMPERATURE / HUMIDITY SENSOR 1 2 3 4 1.
5 EN 4. Insert sensor into the casing, twist and click to the right to secure. 5. Slide temperature and humidity sensor onto the smaller end of the sensor connector. REMOTE UNIT ASSEMBLY 1 3 4 2 1. Insert the cone-shaped end into the pole. 2. Using 2 screws, fix it firmly into place.
6 EN Securing the assembled remote unit: 22 21 21. Insert the 2 rectangular base legs through the holes of the versatile base and hammer down. 22. Using the string, tie a knot on the eye pins. Hammer each eye pin into the ground at a 90° angle. IMPORTANT Using the fasteners, tighten the string.
7 EN T o set up the Rain Gauge: 2 1 1. Remove screws and slide the cover off in an upwards motion. 2. Insert the batteries (2 x UM-3 / AA), matching the polarities (+ / -).
8 EN NOTE Reception takes 2-10 minutes. If the signal is weak, it can take up to 24 hours to get a valid signal. T o enable / disable signal reception: Press and hold Clock area to enable / disable signal reception. A beep will sound to confirm action.
9 EN 4. Press UP / DWN to set the desired values. 5. Press • ALARM to confirm and continue to next setting OR. • touch anywhere on the screen (except tool bar / weather forecast area) to confirm and exit. T o enable / disable alarms: 1. Press desired area to activate.
10 EN T o view remaining days for records: Press clock area until DA T A LOGGER mode is displayed. NOTE When DA T A LOGGER is full, i.e., no more records can be stored on unit, ‘ DA T A LOGGER ’ and ‘ O Days ’ will flash. T o upload records to PC: Plug USB and upload onto computer .
1 1 EN Accuracy 25% - 40%: +/- 7% 40% - 80%: +/- 5% 80% - 90%: +/- 7% Comfort 40% to 70% Memory Current, Min and Max Battery 2 x UM-4 (AAA) 1.5V batteries RF TRANSMISSION RF frequency 433MHz Range Up to 100 meters (328 feet) with no obstructions T ransmission Approx.
An important point after buying a device Oregon Scientific WMR200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific WMR200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific WMR200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific WMR200 you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific WMR200 will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific WMR200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific WMR200.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific WMR200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific WMR200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
