Instruction/ maintenance manual of the product THGR 238 NF Oregon Scientific
Go to page of 12
EN 1 T ABLE OF CONTENTS Additional resources ........................................... 1 About this guide .................................................. 2 Product overview ................................................ 3 Getting started ......
EN 2 ABOUT THIS GUIDE Congratulations on your selection of the Oregon Scientific Wireless Outdoor T emperature and Humidity Sensor (THGR 238 NF) This sensor is compatible with a wide variety of weather monitoring tools, and can be used with most of the Oregon Scientific receiver units.
EN 3 PRODUCT OVERVIEW DESCRIPTIONS 1. T emperature display 2. LED indicator 3. ° C / ° F switch 4. Reset button 5. Channel switch 6. Battery compartment 7.
EN 4 GETTING ST ARTED This product can be used with up to 2 remote units to transmit outdoor temperature and humidity data to a main (indoor) unit. The measurement unit ( ° C or ° F) and channel number (1, 2, or 3) switches are located in the battery compartment, and should be set prior to installation.
EN 5 compartment. 6. Press RESET with the point of a blunt object (such as a ball point pen). 7. Replace the battery compartment lid. Secure. 8. Mount the remote unit on a flat surface using the recess holes on the back of the mounting unit. Insert the sensor into the mounting unit,and gently push down to secure.
EN 6 sensor (1, 2, or 3) is selected. Refer to the main unit User Manual for more information. CHANGE CHANNEL Repeat the Set Up procedure ( 4). In Step 3, select a different Channel Number . LOW BA TTER Y W ARNING Replace the batteries whenever the low battery signal ( ) shows on the remote unit, or on the remote unit area of the main unit.
EN 7 SAFETY AND CARE Wash the unit with a slightly damp cloth and mild detergent. Avoid dropping the unit or placing it in a high-traffic location. Do not expose the unit to direct sunlight since this may affect the accuracy of measurements. W ARNINGS This product is designed to give you years of service if handled properly .
EN 8 Problem Symptom Remedy T emp Main unit T emperature is shows out-of-range. “LLL” or “HHH” Remote Cannot Check batteries unit locate main ( 6) unit • The contents of this user manual are subject to change without notice. • Images not drawn to scale.
EN 9 SPECIFICA TIONS Dimensions L x W x H 105 x 70 x 21 mm (4.2 x 2.8 x 0.84 inches) Weight 80.5 grams (without batteries) T emperature Unit ° C or ° F Range -20 ° C to 60 ° C (-4 ° F to 140 ° F) Resolution 0.
EN 10 NOTE ON COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operations.
EN 11 Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer of an experienced radio/TV technician for help.
EN 12 Wireless Remote Thermo-Hygro Sensor (Model #: THGR 238 NF) User Manual.
An important point after buying a device Oregon Scientific THGR 238 NF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific THGR 238 NF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific THGR 238 NF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific THGR 238 NF you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific THGR 238 NF will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific THGR 238 NF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific THGR 238 NF.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific THGR 238 NF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific THGR 238 NF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
