Instruction/ maintenance manual of the product 91VG Oregon
Go to page of 2
91VG .050” 10 in. to 18 in. (25 to 46 cm) 3/8” Ramp-shaped depth gauges on each cutter Bumper tie straps Commercial Occasional CHAIN PITCH AND GAUGE KICKBACK-REDUCING FEA TURES PITCH GAUGE 91VG F&.
TOP-PLA TE FILE HANDLE DEPTH-GAUGE SETTING: FINISHED FI LIN G AN GLE : D OW N AN GL E: * See warning below CUTTER: 30˚ For more information on these and other Oregon ® products, contact your authorized Oregon ® distributor , or: OREGON CUTTING SYSTEMS DIVISION, BLOUNT , INC.
An important point after buying a device Oregon 91VG (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon 91VG yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon 91VG - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon 91VG you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon 91VG will certainly help you make a decision on the purchase.
If you already are a holder of Oregon 91VG, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon 91VG.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon 91VG. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon 91VG along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
