Instruction/ maintenance manual of the product 58J Oregon
Go to page of 2
58J, 58L, 59J, AND 59L CHAINS FEA TURES BENEFITS FEA TURES AND BENEFITS CHAIN • Chisel cutters, factory ground with • Superior cutting speed (nose-clear, nose-buried, optimum angles and boring) .
FILING INSTRUCTIONS FOR 58J, 58L, 59J, AND 59L CHAINS FILE SIZE: Use a 7/32" round file and file guide. TOP-PLATE TOP-PLATE DEPTH-GAUGE SETTING: CUTTING ANGLE: SIDE-PLATE ANGLE: FILING ANGLE: FILE-GUIDE ANGLE: * See warning below .
An important point after buying a device Oregon 58J (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon 58J yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon 58J - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon 58J you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon 58J will certainly help you make a decision on the purchase.
If you already are a holder of Oregon 58J, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon 58J.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon 58J. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon 58J along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
