Instruction/ maintenance manual of the product HD83 Optoma Technology
Go to page of 2
Copyright 2011 Bit Cau ldron Corporation Page 1 of 2 Pairing Mode – Optoma 3D-RF System: Opt oma 3D-RF Gla sses and Opt oma 3D-RF Emitter for O ptoma 3 D-XL Converte r Box and 3 D ready proje ctor models HD83 , HD33, GT750.
Copyright 2011 Bit Cau ldron Corporation Page 2 of 2 After placing the Opto ma 3D-RF Emitter in pairing mode , you will see the red “in-search-of-a-pair light sequen ce” heartbeat. The Optoma 3D-RF Emitter w ill remain in pair ing mode for on e minute.
An important point after buying a device Optoma Technology HD83 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Optoma Technology HD83 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Optoma Technology HD83 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Optoma Technology HD83 you will learn all the available features of the product, as well as information on its operation. The information that you get Optoma Technology HD83 will certainly help you make a decision on the purchase.
If you already are a holder of Optoma Technology HD83, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Optoma Technology HD83.
However, one of the most important roles played by the user manual is to help in solving problems with Optoma Technology HD83. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Optoma Technology HD83 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
