Instruction/ maintenance manual of the product T-4711 Onkyo
Go to page of 20
CONTENTS Features .............................................................................................................................................. 2 Important safeguards ...................................................................
2 Thank you for your purchase of the Onkyo T-4711 Tuner. Please read this manual thoroughly before making connections and turning power on. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new Tuner.
3 Important safeguards 1. Read Instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference.
4 Before using this unit Voltage selector 1. Determine the proper voltage for your area: 220 – 230 V or 120 V. 2. If the preset voltage is not correct for your area, insert a screwdriver into the groove in the switch. Slide the switch all the way to the right (120 V) or to the left (220 – 230 V), whichever is appropriate.
5 System connections ● Do not plug in the power cord until all connections have been made. ● On each pair of input or output jacks, the lower jack (marked R) corresponds to the right channel, and the upper jack (marked L) to the left channel. VOLTAGE SELECTOR 220-230V 120V FREQ.
6 Antenna connections Loosen the serews and wrap the wire around these screws, Then tighten the screw with a screwdriver. 1. With your fingernail or a small screw- driver, press the stoppers outwardts and remove the cover. 2. Remove the transformer wire A from slit B and insert it into slit C.
7 The T-shaped FM antenna is for indoor use only. Extend the antenna and move it in vari- ous directions until the clearest signal is received. Fix it with push pins or similar in the position giving the least amount of distor- tion.
8 Control positions and names POWER STAND-BY/ON RDS IF BAND HI-BLEND DIMMER MEMORY MODE CLEAR PRESET/ TUNING PRESET / TUNING FM STEREO TUNER T-4711 R D S DISPLAY GROUP SCAN 81 0 1 1 DIMMER MEMORY MODE.
9 Connecting the power POWER REMOTE CONTROL RC-315T 6 9 5 PRESET 8 7 ADJUST DISPLAY GROUP DIMMER ANTENNA 3 4 1 2 0/10 MEMORY SCAN ENTER TIMER TIMER PRESET MODE TUNING 1 5 6 7 8 9 10 11 12 2 3 4 1. Power Button (POWER) [9, 18] 2. Number Buttons (1 ~ 9, 0/10) [10, 17] 3.
10 Receiving stations In order to listen to a radio broadcast, first tune in the radio station, then set it. The radio station can be selected in two ways: by using the auto-tuning function or by directly entering the station’s frequency.
11 7. When the flashing channel is not the desired channel, turn the PRESET/TUNING dial and select a different channel. ● If a station frequency has already been memorized in the selected channel, the channel number will flash quickly. ● Each group contains ten channels.
12 Receiving stations Getting a better FM reception T-4711 IF BAND HI-BLEND DISPLAY STEREO Indicator MODE Signal Strength Indicator ANTENNA DISPLAY ■ APR (Automatic Precision Reception) System The A.
13 Receiving RDS PTY Classifications in USA 1. NEWS 2. Information 3. Sports 4. Talk 5. Rock 6. Classic Rock 7. Adult Hits 8. Soft Rock 9. Top 40 10. Country 11. Oldies 12. Soft 13. Nostalgia 14. Jazz 15. Classical 16. R & B 17. Soft R & B 18.
14 Receiving RDS 1. Press the RDS button until “TP Search” appears on the display. 2. Press the SCAN button to start searching for a TP station. When the unit receives a TP station, it stops scanning. If the unit cannot receive any signal, “Not find” (cannot find the station) is shown on the display.
15 Entering characters The following characters can be used. If the station you are currently listening to on the T-4711 is an RDS sta- tion, the program service name has priority over other information. Therefore you will not be able to enter characters for the station name.
16 Setting the clock 3 2, 4 1 This unit features “ACCUCLOCK”-an automatic clock adjusting fea- ture using RDS broadcast signals. NOTE: ● Before setting the clock, be sure to preset a station frequency. ● Make sure that your FM antenna has been properly connected as explained in page 7.
17 3, 4 2, 5 1 You may wish to set the clock manually if the ACCUCLOCK cannot receive RDS signals, if the displayed time is obviously wrong, or if you wish to set your own time (you may intentionally advance the clock) by doing the following: 1. Press the ADJUST button until “Manual Adjust” is displayed.
18 Using the timer (for remote control only) MODE POWER ENTER TIMER/ PRESET / Before using the timer to listen to a radio broadcast, preset the station frequency. (See “Receiving stations” on pages 10 and 11 for details on how to preset FM/AM stations.
19 5. Press the a / b buttons to set the OFF time, then press the ENTER button. After entering the ON time, the unit will suggest an OFF time of one hour after the entered ON time. 6. Press the a / b buttons to set the preset station number, then press the ENTER button.
20 Specifications FM Tuning Range: European and Worldwide models: 87.50 – 108.00 MHz (50 kHz steps) USA and Canadian models: 87.90 – 107.90 MHz (200 kHz steps) Usable Sensitivity: Mono: 10.3 dBf 0.9 µ V, 75 Ohms IHF 0.8 µ V, 75 Ohms DIN Stereo: 17.
An important point after buying a device Onkyo T-4711 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Onkyo T-4711 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Onkyo T-4711 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Onkyo T-4711 you will learn all the available features of the product, as well as information on its operation. The information that you get Onkyo T-4711 will certainly help you make a decision on the purchase.
If you already are a holder of Onkyo T-4711, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Onkyo T-4711.
However, one of the most important roles played by the user manual is to help in solving problems with Onkyo T-4711. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Onkyo T-4711 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
