Instruction/ maintenance manual of the product TILT-PA Omnimount
Go to page of 6
12 To adjust tilt 1. Hold A wi th 3/4” Soc ket 2. Loosen B with 3/4” Socket 3. Loosen C with 9/16” Socket 4. Position Display 5. Tighten A,B, & C C. B. A. Step 10 — Adjusting Tilt PN —9/05 Specifications are subject to change without prior notice.
2 11 Step 8 — Attaching the Tilt-PA to the Pipe 1. Thread and tighten Tilting Pipe Adapter onto 1.5” NPT Pipe (not included). 2. Tighten Tilt Tension Nut before attaching Adap ter. Tighten Here Step 9 — Attaching the Adapter and Display to the Pipe Adapter 3.
10 Step 7 — Attaching the UM1 to the Display 1. Thread M ounting Screw t hrough Sq uare Washer, Rail, Spacer (if need ed), and into the Display’s Mounting Holes. Mounting Screw Display Spacer ( if needed ) Square Washer NOTE: Ensure Retaining Screws are loose en ough to allow for adjustment 2.
4 ID Description Qty A Philips Screws M4 x 16mm 4 B Philips Screws M4 x 36mm 4 C Philips Screws M4 x 45mm 4 D Philips Screws M5 x 16mm 4 E Philips Screws M5 x 36mm 4 F Philips Screws M5 x 46mm 4 G Phi.
8 Step 4 — Rail Installati on Standard Configuration Narrow Configuration Step 5 — Secure Sliders and Back Plate 1. Set Rails to horizontal distance between Moun ting Holes on Display. 2. Loosely thread Slid er Retain ing Screws through Channels into Sliders 5 Step 1 — Set Studs in UM-1 1.
6 Step 2 — Determine Rail Selection Measure the vertical distance between Mounting Holes on Display. If distance is greater than 19” (48cm ) use the supplied Ex tended Rails. 1. Using the Small Hex Wrench unscrew the Slider Retaining Screws (8). 3.
An important point after buying a device Omnimount TILT-PA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Omnimount TILT-PA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Omnimount TILT-PA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Omnimount TILT-PA you will learn all the available features of the product, as well as information on its operation. The information that you get Omnimount TILT-PA will certainly help you make a decision on the purchase.
If you already are a holder of Omnimount TILT-PA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Omnimount TILT-PA.
However, one of the most important roles played by the user manual is to help in solving problems with Omnimount TILT-PA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Omnimount TILT-PA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
