Instruction/ maintenance manual of the product PST Omega Engineering
Go to page of 4
PSP and PST Series Power Supplies INSTRUCTION SHEET M0252/0707 Shop online at: omega.com e-mail: info@omega.com For latest product manuals: omegamanual.info INTRODUCTION OMEGA ® Power Supplies have outputs ranging from 5 to 28 volts, and from 40 mA to 500 mA (Refer to Tables 1 and 2).
OPERATING INSTRUCTIONS INPUT VOLTAGE: AC input models operate on 105-125 VAC, 47-420 Hz. (Models with an input of 210-250 VAC, 47420 Hz are available on special order). OUTPUT VOLTAGE ADJUSTMENT: Output(s) factory set to within +1% of the nominal output voltage rating.
COMMON POWER SUPPLY SPECIFICATIONS INPUT VOLTAGE: 105-125 V ac, 47 to 420 Hz, single phase OUTPUT: See tables 1 and 2 REGULATION: 0.05% line, 0.05% load RIPPLE: 0.5 mV rms OUTPUT VOLTAGE TRIM ADJUSTMENT: Output is factory preset to ± 2% (1 to 9 volt models) or ± 1 1% (10 to 75 volt models) of nominal output voltage.
It is the policy of OMEGA Engineering, Inc. to comply with all worldwide safety and EMC/EMI regulations that apply. OMEGA is constantly pursuing certification of its products to the European New Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification.
An important point after buying a device Omega Engineering PST (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Omega Engineering PST yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Omega Engineering PST - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Omega Engineering PST you will learn all the available features of the product, as well as information on its operation. The information that you get Omega Engineering PST will certainly help you make a decision on the purchase.
If you already are a holder of Omega Engineering PST, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Omega Engineering PST.
However, one of the most important roles played by the user manual is to help in solving problems with Omega Engineering PST. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Omega Engineering PST along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
