Instruction/ maintenance manual of the product CAMEDIA P-330 Olympus
Go to page of 79
P-330 Digital color printer 3-865-712- 11 (1) Installation G u id e • This Installation Guide explains h ow t o install and use the Digital Color Printer P-330 f o r Windows 95/98, 3 . 1 and Macintosh software. • Keep this guide handy f o r future reference an d refer to i t when requesting service.
Program © 1998 Olympus Optical Co., Ltd. All rights reserved. This manual or th e s of tw ar e described herein, in whole or in part, may not be reproduced, translated o r reduced to any machine readable form w ithout prior written approval from Olympus Optical Co.
System requirements ............................. 4 Installing t h e software ........................... 5 Uninstalling t h e software ................ 7 Printing ................................................... 8 Stopping printing ...............
Notes • T h is software i s subject to be upgraded without notice. • Th e pictures used in this manual may be different fr o m t h e actual screen of th e software. Your computer and system software m u s t m e e t th e following minimum requirements to r u n t h e printer driver.
Installing t he software Install t he software containing the printer driver fo r Windows 95/98 i n the supplied CD-ROM. Connect th e printer to th e computer. S e e the operating instructions o f the Digital Color Printer. Turn o n t he printer and the computer.
Notes • Wh en th e d i a lo g prompting you to insert the Windows CD - R O M or floppy d is k appears during installation, insert the specified CD - RO M or floppy d is k an d click [OK]. If th e Windows Setup starts after t he W indows CD- ROM is inserted, finish the S et up program.
Uninstalling the software When t he driver software becomes unnecessary, remove a ll th e software files f ro m your hard disk a s follows: Click the Windows [Start] button, click [Settings], and click [Printers]. Th e [Printers] di alo g appears. Click to select [OLYMPUS P-330].
Printing Tip When y ou print in 3 0 6 dpi in th e application software, se t the picture size up to 1376 x 10 24 pixels. Note If th e message "This printer is not supported by the driver currently associated wi t h it. Windows will use O LY MP US P-330 instead.
Click [ OK] to close t h e [Print Setup] dialog. Click [Print] from t h e [File] m e n u of th e application. Th e [Print] dialog appears. Se t [Copies]. Y o u ca n set u p to 30 copies. Y ou c an print continuously using t he supplied automatic feeder.
Click [O K] . T he next dialog appears. 7 F o r further settings an d operations You c an ma k e split printing (page 1 4 ) , adjust resolution (page 1 2 ) or picture quality (page 13). Notes on the hi gh speed print mode • Da t a transmission speed depends o n t h e computer.
Click the "Document Name" waiting to be printed. Click [Document] in t he men u and then click [Cancel Printing]. Refer to t he manual o f t he Windows 95/98 fo r details. 4 5 Hints f o r better printout To obtain better print result, read the application software manual carefully.
Setting the resolution You can se t the resolution depending o n the image you print. Start the application software u s e d to print, an d click [ Pr in t er Setup] f r o m t he [File] m e nu . The [Print Setup] dialog appears. S e t [Printer] to [O LY MP US P-330], click [Properties] and th en click [Graphics].
Adjusting the picture quality Y o u c a n adjust th e picture quality o f the p ri n ts . Click [Print] fr o m t h e [File] m e n u o f th e app l i c a t i o n , and i n th e [Print] dialog click [OK]. T h e [OLYMPUS P - 33 0 ] dialog appears. Ad j u s t the picture.
Making t he split print To mak e the split print correctly If the application i s to print according to t he printer's resolution, set th e i mag e size as fo llow s: • 6 8 8 x 5 1 2 p ix el s i n 1 5 3 dpi • 1376 x 1024 pixels in 306 dpi S e e t he application's manual for setting th e im ag e size.
Making multiple prints a t h i g h speed T o print multiple copies a t high speed or w i t h l im i te d h ar d disk space, check [Print directly to the printer] i n t h e [Spool Settings] window before you start printing. Click [Start]. Point to [Settings] an d click [Printers].
Ch ec k [Print directly to the p r i nte r ]. 7 Click [ O K ] an d close t h e [Spool Settings] window. Click [OK] and close th e [OLYMPUS P - 3 30 Properties] window.
System requirements Notes • T h i s software i s subject to be upgraded without notice. • T h e pictures used in th i s manual may b e different from t h e actual screen o f the software. Your computer a nd system software must me et the following minimum requirements to ru n the printer driver.
Install the software containing the printer driver for the Windows 3 . 1 in the supplied CD-ROM. Installing the software Connect th e printer to the computer. S e e the operating instructions o f t he Digital Color Printer. Turn o n the printer and t he computer.
Click [Install]. 6 Insert the supplied CD- RO M . Input "D:EnglishWin31" and click [OK]. Input your CD-ROM drive fo r "D." Y o u ca n also select f r o m [Browse]. 7 8 Make sure that "OLYMPUS P-330" i s selected a nd click [OK].
Ma ke s u re t h a t "OLYMPUS P-330 o n LPT1:" is added in the [Installed Printers:] b ox an d click [Connect]. S e t [Transmission Retry] to "300," check "Fast Printing Direct to Port," and click [OK]. Click [Close]. Installation finishes.
Uninstalling the software Wh e n t h e driv er software becomes unnecessary, remove all the software files from your hard d is k as follows: Double-click the [Control Panel] icon in t he [Main] window. Double-click the [Printers] icon in t he [Control Panel] window.
Printing Tip Whe n you print i n 3 0 6 dpi in t he application software, s e t the picture size to 1376 x 1 024 pixels. Start the application software used to print, and select th e image to be printed. Click [Print] from t h e [ F ile] me nu of th e application.
Click [OK]. The [Print] dialog appears. Set [Copies]. Yo u can set u p t o 3 0 copies. Yo u can print continuously using the supplied automatic feeder. 5 6 Click [OK]. Th e next dialog appears. 7 Tip Yo u ca n make split prints (page 27), se t resolution (page 25) or adjust th e picture quality (page 26) .
Note I f the printing of the data has already started, don't tr y to cancel printing. Doing so wil l cause t he paper to j am. Stopping printing When a "printing" message is on the screen Click the [Stop] button or the [Cancel] button. T h e printing is canceled.
Setting the resolution Maximum picture size • 1 3 7 6 x 1 0 2 4 pixels a t 306 dpi • 6 8 8 x 5 1 2 pixels a t 1 5 3 dpi Tips • T o print the picture smaller than 6 8 8 x 5 1 2 pixels, select 1 5 3 d pi.
Adjusting the picture quality Yo u c an adjust t he picture quality o f the prints. Click [Print] fr o m the [File] me nu of th e application, and in the [Print] dialog click [OK].
You c an make a 2 - , 4 - , 9 - , o r 16-split print with an image inset in each split-plane. Click [Print] from t h e [File] menu of the application, and in the [Pri nt] dialog click [OK]. The [OLYMPUS P-330] dialog appears. Select t h e desired number of images per sheet i n [Split].
Making multiple prints a t h ig h speed T o print multiple copies at high speed or wi t h limited h ar d disk space, uncheck [U s e Print Manager] in the [Printers] dialog before you start printing. Double-click [Control Panel] in the [Main] window, and then double-click [Printers] to open the [Printers] dialog.
System requirements Your computer and system software must meet the following minimum requirements to ru n th e printer driver. • A n Apple Macintosh compatible computer with a 68030 processor or later a nd s erial port model Supporting Apple system software version 7 .
Installing the software Install t h e software containing the printer driver f o r th e Macintosh in t he supplied CD -R O M . 1 2 3 4 Connect the printer to the computer. S e e th e operating instructions of the Digital Color Printer. Tu rn on the printer a nd the computer.
Click [Install]. Installation starts up . 6 Wh e n th e software is installed successfully, the ne x t screen appears. Click [OK]. 7 Fo r Macintosh 31.
Printing S e t [Chooser]. Select [Chooser] from t h e [Apple] menu. The [Chooser] wi nd ow is displayed. 1 Click the [P-330] icon in the l e ft box. Select t he i co n in t h e right box according to the p or t y o u connected the printer. Select [ON] o r [OFF] f o r t h e [Background Print].
Notes • Us e the se t of the print paper an d i n k ribbon cartridge supplied together in the sa me carton. Als o make sure t o s et [Size] in t he combination shown in the table. If you use them in different combination, proper printing results ma y no t be obtained or other trouble ma y occur.
Display t h e [Print] dialog in the [File] me nu f r o m the application and s et t he pages a nd quantity fo r printing. 5 Th e dialog differs depending on the application software. Cl i ck [OK]. Th e printer st ar ts printing. T o adjust t h e picture quality, s e e page 3 6 .
Stopping printing Wh en a "printing" message is on the screen Click the [Stop] button or the [Cancel] button. O r you m ay press t he period ( .) k ey while holding t he command ( ) ke y down. Th e printing i s canceled. Wh en using the Print Monitor Click th e [Cancel] button to cancel printing.
Adjusting the picture quality Adjusting the picture quality ma y result in better printout depending on i mages. Adjust the picture quality as described below. Display the [Print] dialog in t he [File] m en u from th e application software. 1 2 Clic k [Option].
Note If th e application software has t h e same adjustment item as the driver software, do the adjustment o n th e application software, n ot o n the driver software. I f you adjust the same ite m on both th e application software and the driver software, the image ma y be printed with unexpected result.
Making t he split print Tips • To preview t he printed image, s ee page 3 9. • Y ou ca n set [Split] also on the [Preview] screen (page 39) . Note Th e 16-split images printed on the 16-cut sticker a re partly cut off d ue to t he size o f t he sticker.
Y o u ca n also set [Split] a n d adjust color balance on th is screen. Click [Preview]. Th e preview screen appears. Previewing function l et s y ou confirm on the monitor screen how t he printed imag e will appear before printing. Display th e [Print] dialog in th e [File] m e n u from th e application software.
Ch ec k t ha t the image i s placed within t he print paper, an d click [Print this page] or [Print this page onward]. T he printer starts printing. If you click [Pr int thi s p age onward], the prin ter prints from the current p age through the l a s t page.
Troubleshooting Us e the following measures to solve pr ob lems y ou experience with your printer. If the problem persists, contact your dealer fo r information on what to do next. The printer prints the image split into pieces. • T he resolution o f the image is incorrectly set or the size of t he image i s too large.
• The printer m ay b e malfunctioning. Ch ec k the indicators of the printer o r the error messages of t he computer. If printer does not start printing in 5 minutes after print paper is installed when there i s nothing wrong with the print er or computer, turn of f t h e pr int er an d turn i t o n again.
• Paintings, photographs, and books under copyright cannot be du p li c at e d without permission of th e copyright holder. • Olympus reserves the right to alter the features a n d contents of this guide without obligation or advance notice.
P-300U 3-861-012- 11 (1) Digital color printer Instructions •Thank yo u f o r purchasing t h is Olympus di gi ta l color printer. • Before u si n g this product, read this ma nua l carefu ll y to ensure correct u se .
Owner's Record Th e model and serial numbers are located at th e rear. Record the serial number i n th e space provided below. Refer t o them whenever y ou call upon your dealer regarding this product.
Table of contents Introduction................................................................................ 4 Precautions................................................................................. 4 Safety Precautions ........................
Introduction Thank you f o r purchasing this OLYMPUS digital color printer. Read this manual and warranty f or future reference and us e them when requesting service. Make sure tha t the d ate of purchase and dealer's name are included on your warranty.
WARNING If anything strange occurs with the printer, unplug t he power cord. If the printer emits smoke, strange smells, or strange sounds, tu r n o ff an d unplug the printer to prevent fire or ele c tr i c shock. Then contact Olympus. Should a n y liquid o r foreign obj e c t penetrate the printer, unplug the power cord.
D o no t disassemble or modify the printer. T h e printer h as bo th hot and high voltage parts o n the inside. To prevent an electric shock o r printer malfunction, do not attempt to disassemble or m odify t he pr i n te r. Fo r service o r repair, contact Olympus.
WARNING Mak e sure that excessive du s t and foreign matter do not accumulate o n t he power cord. Dust and foreign matter conduct electricity, which can cause fi r e and electric shock. If excessive d us t and foreign matter accumulate o n the cord, unplug t he cord and remove them.
D o n o t block the v ent. Doing so m ay cause the printer to hea t up, possibly resulting in fire o r electric shock. • Do not block the top or s id e vent.
Unplug t h e power cord from th e power outlet before cleaning the printer. Accidentally touching a non-user-serviceable p a rt m a y cause electric shock. Unplug th e p rin ter if i t is not used f o r an e x t ended period of time, fo r example while yo u a r e on a long trip.
Unpacking t he printer Make sure that t he following accessories ar e supplied with y our printer. • Automatic feeder ( 1 ) • Power cord ( 1 ) • CD-ROM ( f or W indows 9 5 , 3 .
W h at yo u can do w it h the Digital Color Printer P-300U The Digital C olo r Printer P-300U enables yo u to directly print the image yo u recorded u sing the OLYMPUS Digital Cameras. By connecting the P-300U t o y o u r PC o r Macintosh, you c an make prints of images from your computer.
Paper outlet (p. 3 2 ) Serial p or t (p . 1 9 , 22,27) Parallel port (p. 25,26) Power switch (p. 1 8 ) AC power connector (p. 1 8 ) Direct print button (p. 21,24) Automatic feeder compartment li d (p. 18) READY indicator (p. 1 9 , 2 2 , 2 5 , 2 8 , 30,31) PRINTING indic ator (p.
Automatic feeder Con nect ing terminal Window showing number o f copies (number o f copies) di al (p. 2 1 , 24 ) Cover (p. 1 6 ) Spacer (p . 16 ) Slide switch (p.
Loading th e i n k ribbon cartridge Insert th e ink ribbon cartridge in to the printer. Use only th e ink r ibbo n cartridge supplied with the print paper packed in the s am e carton. While pressing down the lever, open t he cartridge compartment li d.
Cautio n Neve r pu t you r han d int o th e cartridg e compartment . Th e therma l hea d reache s hig h temperatures , especiall y afte r repeate d printing . I f th e cartridg e compartmen t li d doe s no t clos e Remov e th e in k ribbo n cartridge , an d the n reinser t it .
Inserting the print paper Yo u can u se the print papers mentioned in "Optional supp lies (pr int packs)" on p age 3 4 . First insert the print paper into the supplied automatic feeder, and then install the automatic feeder to the printer. You ma y insert the print paper d i rectly into the printer.
• Yo u cannot type on th e printing surface; u se a n o il i nk p en to w rite greetings or other characters or drawings on the printing surface. • Th e automatic feeder ca n hold u p to 3 0 sheets o f standard paper or sticker paper.
Inserting t he print paper (continued) Installing th e automatic feeder to t he printer Connect the supplied power co r d to the printer, and then to the AC outlet. 1 Push the automatic feeder com p art ment. Th e li d o f the automatic feeder compartment opens.
Printing a n image recorded by OLYMPUS Digital Cameras You can directly print the image recorded by OLYMPUS Digital Cameras. Printing operation differs depending on the model as described below. DIGITAL VISION D-320L/D-220L/D-220 Digital C am er as Check th at th e printer and digital camera are turned off.
Printing an image recorded by OLYMPUS Digital Cameras (continued) Press th e LCD ON/OFF but to n o f t h e d igital camera t o turn o n th e playback mode. 4 Control panel L C D ON/OFF button Frame backward and forward buttons Select t h e photo to be printed using the frame backward and forward buttons on the digital camera.
Notes • Press th e direct print button only after t h e i ma ge y ou h a d selected was displayed. • We recommend using the digital camera with the A C power adapter. • It ma y take longer to print th e photo recorded i n HQ mode th an other modes o f D-320L.
Printing an image recorded by OLYMPUS Digital Cameras (continued) Note Bef ore printing, be s ure t o close t h e lens b a rrier o f the digital camera. D I GI TA L VISION D-300L/D-200L Digital Cameras Check that th e printer and digital camera a re turned off.
4 Press th e LC D ON/OFF button o f t he digital camera to turn on t he playback mode. Control panel LC D O N /O F F button Frame backward an d forward buttons Select t h e photo to be printed using the frame backward a nd forward b uttons on the digital camera.
Notes • Press the direct pr in t button o n ly after t he image yo u ha d selected was displayed. • We recommend using the digital camera with th e AC power adapter. To stop continuous printing S e t th e d ia l o f the automatic feeder to 1 . T h e printer stops after the current printing.
DIGITAL VISION D-600L/D-500L Digital Cameras Check th a t the printer and digital camera a re turned off. Connect th e parallel p ort of the printer to the printer port o f the digital camera with t he supplied direct print cable. 1 2 Tu rn on the printer.
Printing a n image from t h e computer To pr in t an image f r o m the computer, first install th e supplied printer driver to your computer. T o make th e connection, also refer t o t h e computer's manual. Connecting t o an I BM PC/AT and its compatible Us e the supplied cable.
Connecting to a Macintosh and it s compatible Use t he supplied cable(Mini DIN 8-pin/Mini DIN 8-pin). For Macintosh: If y our computer does not ma t ch th e plug Use a commercialy available cable having a Mini DIN 8-pin plug to connect t he p rinte r an d a matching plu g to connect the computer.
Printing while directly inserting print paper S en d the print command from t he c omputer or digital still camera. Th e PAPER indicator ( ) i s on , and then the READY indicator starts flashing. 1 Insert a sheet of print paper in to the paper inlet until le ss than 13/16 inches ( 2 c m) of th e print paper i s l e f t out o f the paper inlet.
Troubleshooting Us e the following measures to solve problems you may experience with y ou r printer. I f th e problem persists, contact you r dealer f o r in for ma ti on on what to do next. • Th e power i s not turned on. Connect the AC power cord to an AC outlet securely.
Troubleshooting (continued) I f the indicators ar e o n If you cannot print, check the ind icator s on th e front panel. • Th e RIBBON indicator is on . Th e ink ribbon cartridge is not loaded. Th e ink ribbon has r un out. Change the ink ribbon cartridge.
• The READY indicator doe s not light or all indicators are flashing. Print paper is jammed. Remove t he j am med paper from t h e paper outlets o n t he front a n d rear panels. Remove the automatic feeder f ro m the printer and s e e if th e paper jammed.
Troubleshooting (continued) Notes • If the READY indicator d o es n ot turn o n after having removed th e jammed paper, turn th e power of f and on again. Try printing from t he camera or computer again. • If yo u cannot remove th e jammed paper, contact Olympus.
Specifications Printer Printing system Effective pixels Printing size Gradations Sublimation d y e transfer printing (Yellow/Magenta/Cyan 3 pass) 1376 ( H) x 1024 (V) dot 4 ½ (H) x 3 3 /8 (V ) inches (114 x 85 mm) 25 6 levels (8 bits), per color (24 bits) Approx.
Precautions on the i n k ribbon cartridge an d print paper Notes on stor ing t he ink ribbon cartridge • Avoid placing t he cartridge in a l ocation subject to: - high temperatures - hi gh humidity .
Sticker (1-cut) s et P-60NS1E (Adhesive-label sheets) O ne ink ribbon cartridge and 6 0 sheets of 1-cut sticker Sticker (16-cut) s e t N-60NS16E (Adhesive-label sheets) On e ink ribbon ca rtridge a nd 6 0 sheets of 16-cut sticker • I B M PC/AT i s a registered trademark o f International Business Machines Corporation o f the U.
OLYMPUS OPTICAL CO., LTD. San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shi nj uku-ku, Tokyo, Japan. Tel. 03-3340-2026 OLYMPUS AMERICA INC. Tw o Corporate Center Drive, Melv ille, NY 11747-3157, U.S.A. Tel. 516-844-5000 OLYMPUS OPTICAL C O. (EUROPA) GMBH.
An important point after buying a device Olympus CAMEDIA P-330 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Olympus CAMEDIA P-330 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Olympus CAMEDIA P-330 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Olympus CAMEDIA P-330 you will learn all the available features of the product, as well as information on its operation. The information that you get Olympus CAMEDIA P-330 will certainly help you make a decision on the purchase.
If you already are a holder of Olympus CAMEDIA P-330, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Olympus CAMEDIA P-330.
However, one of the most important roles played by the user manual is to help in solving problems with Olympus CAMEDIA P-330. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Olympus CAMEDIA P-330 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center