Instruction/ maintenance manual of the product ECR 7700LD Olivetti
Go to page of 38
ECR 7700 ECR 7700 ECR 7700 ECR 7700 ECR 7700 Cash Register USER'S GUIDE ENGLISH.
PUBLICATION ISSUED BY: Olivetti S.p.A. www.olivetti.com Copyright © 2009, Olivetti All rights reserved Your attention is drawn to the following actions that could compromise the characteristics of th.
FIGURES - IMAGES ABBILDUNGEN - FIGURAS AFBEELDINGEN - FIGURAS FIGURER - BILDER 5 2 1 4 6 7 8 9 10 1 2 3 4 5 7 9 10 21 20 19 17 18 16 15 14 13 11 6 8 3 12.
1 . Connect the power cord to an electrical outlet that is near the product and easily accessible. 2 . Install your cash register on a flat and stable surface, at a location where no one can step on or trip over the power cord. 3 . Do not use your cash register near water, or with wet hands.
ST ART UP - ST ART UP ST ART UP - ST ART UP ST ART UP - ST ART UP ST ART UP - ST ART UP 1. Plug the cash register into a electrical outlet and insert the batteries. 2. Load the paper. 3. Proceed with Quick Start Programming. 4. Perform basic sales transactions.
INSERTING MEMORY BACKUP BATTERIES INSÉRER LES BATTERIES TAMPONS DE LA MÉMOIRE BATTERIEN ZUR SPEICHERSICHERUNG EINSETZEN INSERCIÓN DE LAS BATERÍAS DE RESPALDO DE LA MEMORIA INSTALLEREN VAN DE BATTE.
LOADING THERMAL PAPER INST ALLA TION DU P APIER THERMIQUE EINLEGEN VON THERMOP APIER CARGA DEL PAPEL TÉRMICO THERMISCH P APIER PLAA TSEN COLOCAR PAPEL TÉRMICO ISÆTNING AF TERMOPAPIR LADDA VÄRMEKÄ.
DAILY JOB OPERATIONS OPÉRATIONS QUOTIDIENNES TÄGLICHE ARBEITEN OPERACIONES COTIDIANAS DURANTE EL TRABAJO DAGELIJKSE TAKEN OPERAÇÕES DIÁRIAS DAGLIGE ARBEJDSOPERATIONER DAGLIGA ARBETSMOMENT Morning.
1 ENGLISH Major Features • 14 departments and up to 400 Price Look-Up (PLU) settings; • 8 clerk numbers to monitor the sales of individual employees; • Electronic journal with a maximum capacity.
2 Keypad Functions With reference to figure 5: 1. - Allows price entries for departments 8-14. Press this key before entering applicable department keys.
3 ENGLISH Operator and Customer Displays Your cash register is equipped with two 10-digit alphanumeric Vacuum Fluorescent Displays (VFD). With reference to figure 6, the display is read from left to right as follows: C1.
4 Full Reset - New Language Entry Excluded A Full Reset - New Language Entry Excluded, erases the cash register's working memory, all totals and counters (all report data) and cancels all cash register programming data with the exclusion of the language- specific captions programmed.
5 ENGLISH Quick Start This section allows you to program basic cash register features so that you can start to work right away with your new product. Programs and transaction information for management reports are stored in the memory of the cash register which is protected by back-up batteries.
6 Example: Program a multiple positive item sale, VAT 2 and a price of £2.50 to an item in Department 2. Type/Press: After you have programmed your departments, you can print a report that indicates the programmed values. See section "Department Programming Report" for details.
7 ENGLISH • Confirm your final caption by pressing . Example: Enter the word BOOKS. Type/Press: Using the Character T able The Character Table provides all the letters and symbols that your cash register is capable of printing.
8 Department Names You can assign a name of up to 12 characters long to each of the 14 departments available. The department names that you define will be printed on the customer receipts, journal reports and on all management reports. 1. Control key position: PRG .
9 ENGLISH Foreign Currency Exchange Rates You can program up to four different foreign currency exchange rates. The foreign currency value is displayed whenever is pressed during a sales transaction.
10 Fraction Rounding for V A T Calculation Fraction rounding is used to round figures with decimals up or down to the nearest whole numbers and is used for percent tax calculations.
11 ENGLISH Entering the Calculator Mode 1. Control key position: REG or JRNL . 2. Type the [four-digit password] and press . 3. A line will appear on the far left-hand side of the display indicating that the calculator mode is in operation. Exiting the Calculator Mode 1.
12 Clerk Names You can program a clerk name or identifier of up to 12 characters long by using the alphanumeric keypad or the Character Table. It will be automatically printed on all receipts, journal records and management reports. 1. Control key position: PRG .
13 ENGLISH To exit the training mode when a password has been defined: 1. Control key position: REG or JRNL . 2. Type your [4-digit password] and press . Programming a T raining Mode Password A training mode password prevents unauthorized access to the training mode and allows training to be performed in the REG or JRNL mode.
14 2 0 Consecutive receipt number reset 0 = Do not reset consecutive receipt number after Z1 report 1 = Reset consecutive receipt number after Z1 report 2 1 Grand Total reset 0 = Do not reset Grand To.
15 ENGLISH Changing the Cash Register's Standard Settings 1. Control key position: PRG . 2. Type the [number] of the machine condition. (1 to 90 as indicated in the table) that you wish to change. 3. Type the [number] of the required setting. 4. Press .
16 X2 and Z2 Financial Reports 1. Control key position: X1/X2 or Z1/Z2 (bear in mind that a Z2 printout resets all totals to zero). 2. If a Z-mode manager password was defined, type the [4-digit password] and press . 3. Type and press . Clerk Report 1.
17 ENGLISH PLU Stock Report This report provides a printout showing the number of items in stock for each individual PLU. It can only be issued in the X1/X2 mode.
18 T raining Report This report provides an X or Z report of the transactions performed in the training mode. Like the ordinary X and Z financial reports, a Z report resets all transaction totals to z.
19 ENGLISH Daily Report By entering the number of Z financial reports that you wish to view, this report prints the receipts recorded before the defined Z financial report along with the report itself. 1. Control key position: X1/X2 or Z1/Z2 . Bear in mind that in the Z position the journal report contents are cleared.
20 Receipt On/Of f Outside of a sales transaction, the cash register can be switched to the non-print mode where the transactions performed in the REG (Receipt) mode will not be printed. In the non-print mode, the sales totals will be maintained and the management reports will print.
21 ENGLISH 5. Press for foreign currency number 1 programmed and press to display the current balance due in foreign currency. 6 . Type the amount tendered in foreign currency and press . The change due to the customer is displayed. Registering a Charge T ransaction Example: Register a £2.
22 Split Check/Cash T ender Example: Register a £24.00 item to Department 1, a £36.00 item to Department 3 and a £4.00 item to Depart- ment 4. Split the tender between £60.00 check and £4.00 cash. 1. Press . 2. Press . 3. Presss . 4. Press . 5. Press .
23 ENGLISH Registering a Sales T ransaction Using Preset PLU Codes To use this feature, PLU codes must have been previously set. Example: Use preset PLU codes to register an entire transaction: register PLU 1 and multiply 3 PLU 2. Com- pute change for a cash tender.
24 Registering Money Received on Account Up to 7 digits can be used for registering money received on account. Example: Register £200.00 received on account.
ENGLISH Cash Register Specifications Listed below are the technical characteristics of this cash register model. Type: Electronic cash register with clamshell thermal printer, 14 departments, 8 clerks, up to 400 PLU settings and 3,000 line electronic journal Displays: Two 10-digit operator and client alphanumeric Vacuum Florescent Displays (VFD).
DANSK Kasseapparatets specifikationer Nedenfor finder de kasseapparatets tekniske specifikationer. Type: Den elektroniske kasseapparat med en muslingeskalformet termoprinter, 14 Varegrupper, 8 ekspedienter, op til 400 PLU indstillinger og 3.
Character Table Tableau des Caractères Zeichentabelle Tabla de Caracteres FIGURES - IMAGES ABBILDUNGEN - FIGURAS AFBEELDINGEN - FIGURAS FIGURER - BILDER A = Nombre defois que l’on doit presser la touche N.
.
DIRECTIVE 2002/96/CE ON THE TREA TMEN T , COLLECTION, RECYCLING AND DISPOSAL OF ELECTRIC AND ELECTRONIC DEVICES AND THEIR COMPONENTS 1. FOR COUNTRIES IN THE EUROPEAN UNION (EU) The disposal of electric and electronic devices as solid urban waste is strictly prohibited: it must be collected separately .
Code: 551403 Code: 551403 Code: 551403 Code: 551403 Code: 551403.
An important point after buying a device Olivetti ECR 7700LD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Olivetti ECR 7700LD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Olivetti ECR 7700LD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Olivetti ECR 7700LD you will learn all the available features of the product, as well as information on its operation. The information that you get Olivetti ECR 7700LD will certainly help you make a decision on the purchase.
If you already are a holder of Olivetti ECR 7700LD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Olivetti ECR 7700LD.
However, one of the most important roles played by the user manual is to help in solving problems with Olivetti ECR 7700LD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Olivetti ECR 7700LD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
