Instruction/ maintenance manual of the product None Olicom
Go to page of 5
Broadband W ireless Router (AP) Quick Started Guide Introduction Congratulations on your choosing of this Broadband Wireless Router (AP) with 4-port switch and access point that extend your existing broadba nd DSL/Cable connection.
Packet Contents • • • • Broadband W ireless Router (AP) Power Adapter R J - 4 5 E t h e r n e t C a b l e Quick Started Guide and User Manual CD Hardware Front panel The following illustration shows the front panel of the Broadband W ireless Router (AP): 1.
Connecting the Broadband Wireless Router (AP) 1 Connecting to the W AN port. Connect the Ethernet cable with your xDSL/A TU-R to the 10Base-T Ethernet W AN port on your Broadband W ireless Router (AP). Note: 1. The attached xDSL/A TU-R must provide a standard 10Base-T Ethernet connection.
Basic Configuration On Ethernet Client Step 1 Choose a client PC and configure it to get a dynamic IP from the Broadband W ireless Router (AP). Step 2 Start up your browser and type 192.168.0.1 as the address to enter the web-based manager. Step 3 Enter the default username and password.
Important Notice 1. If you are using PPPoE, the default connection type is Dial On Demand and the Max Idle Time is 10 min . You may adjust the max idle tim e as required. 2. As the default SSID for wireless connection is “ IEEE 802.11 LAN ”, it is recommended to customize your SSID value.
An important point after buying a device Olicom None (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Olicom None yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Olicom None - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Olicom None you will learn all the available features of the product, as well as information on its operation. The information that you get Olicom None will certainly help you make a decision on the purchase.
If you already are a holder of Olicom None, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Olicom None.
However, one of the most important roles played by the user manual is to help in solving problems with Olicom None. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Olicom None along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
