Instruction/ maintenance manual of the product Whisper NZXT
Go to page of 15
Whisper User’s manual.
.
NZXT. 1 Thank you. Dear valued customers, Thank you for purchasin g our product. We are thankful to all our fans for the continuing support, afte r just four years s ince entering th e computer chassis market with the Guardi an in 2003, NZ XT is now an established gaming brand and manufac turer of qualit y hardware in t he market today.
NZXT. 2 Whisper Specifications :: Complete low noise solution: The NZXT Whisper comes standard with rubber grommets and a thick 10mm sound d ampening foam inside the chassis. With a 3mm thickness, t he dampening foam decreases the n oise inside the system significantly.
NZXT. 3 Table of Contents Thank you. ..................................................................................... 1 Whisper Specifications .................................................................. 2 Before Begi nning.. ......
NZXT. 4 steps will outline the st eps to remove the t op, side panels and the motherboard tray. 1. Remove the thumb screws securing the side panel s. 2.
NZXT. 5 LED, Power and Reset Installation Please refer first to your motherb oard manual to locate whe re the power switch and reset pins are located. The power and re set buttons are located at the top of the chassis. The colors following each instruction designate the color of the wire s.
NZXT. 6 2. Connect the power switch pin (labeled POWE R SW) to the PWR connector on the mot herboard. (Yellow/White +/-) 3. Connect the HDD LED (l a beled H.D.D LED) to the appropriate headers on your mothe rboard. The HDD LED located on the front panel should flash gree n when there is activity in the hard drive.
NZXT. 7 R-OUT Front Right Channel Audio Signal Line out_R L-RET Rear Left Channel Audio Signal BLINE Line out_L R-RET Rear Right Channel Audio Signal BLINE Line out_R ASUS © Motherboard Pin Assignment External 5.25” Drive Bay Installation Please follow the directions below to install the 5.
NZXT. 8 3. Slide the 5.25” device into the chassi s from the front panel. 4. Match the holes on the 5.25” to the pins on the screwl ess mechanism and re-attach it onto the stee l bays.
NZXT. 9 Turn to lock the device in place 5. From the other side of the bay, use screws provided to provide more security. Attach the screw less bracket match ing the 5.
NZXT. 10 Turn and lock the device in plac e. User may choose to s crew the device on also. External 3.5” Drive Bay Installation The NZXT Whisper comes standard wit h one external 5.25” to 3.5” bracket. Please follow the directions below to install t he external 3.
NZXT. 11 3. Screw the HDD to the hard drive tray. 4. Slide the tray back into the cage to secure it. The hard drive secured into the cage Installing the power suppl y with sound dampening cover The NZ.
NZXT. 12 purchase to further dampen sound s from vibration during operation. Please follow the directions below for installation. 1. Attach the rubber mount on to the power supply, make sure the direction is correct by aligning the h oles. 2. Align the power supply with the mounting holes on the bracket.
NZXT. 13 Managing the ca bles The NZXT Whisper allows the user to hide ca bles behind the motherboard tray, simply route the cables be hind the tray and out of the holes to organize cable s in the chassis. A additional hole is also drilled to route the cables from the PSU area to the MB area.
An important point after buying a device NZXT Whisper (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NZXT Whisper yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NZXT Whisper - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NZXT Whisper you will learn all the available features of the product, as well as information on its operation. The information that you get NZXT Whisper will certainly help you make a decision on the purchase.
If you already are a holder of NZXT Whisper, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NZXT Whisper.
However, one of the most important roles played by the user manual is to help in solving problems with NZXT Whisper. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NZXT Whisper along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
