Instruction/ maintenance manual of the product H500 Amphony
Go to page of 8
R R User and Installation Guide 5.8 GHz DIGIT AL Wireless Headphones Model 500.
User and Installation Guide Page 1 R R Step 1 Connecting the transmitter The transmitter connects to a line-out interface via the supplied RCA cable. Most audio devices provide a line-out interface. If no line-out interface is available, the transmitter can also be connected to other audio outputs by using an appropriate adapter.
User and Installation Guide Page 2 R R Step 2 Placing the transmitter The operating range essentially depends on how many obstacles there are between the transmitter and the headphones. Therefore, it should be carefully considered where to place the transmitter.
User and Installation Guide Page 3 R R Step 3 Installing the headphone batteries Two AA (UM-3, R6, Mignon - 1.5 V) batteries are required to operate the headphones. Rechargable batteries with a sufficiently high voltage can be used as well. Choosing batteries with a high capacity (mAh) will extend operating time.
User and Installation Guide Page 4 R R Step 4 Operating the headphones After powering up the transmitter, the transmit light will light for approximately 5 seconds while the transmitter initializes. After initialization, the transmit light will go out.
User and Installation Guide Page 5 R R Problems and Solutions Table What Is Happening Possible Why What to Do Transmit light of transmi tter doe s not light when DC power is applied Faulty AC adapter or faul ty power outl et Check the power outlet an d the AC ada pter, if possi ble, c heck for correct voltage of the adap ter.
User and Installation Guide Page 6 R R Copyright (C) 2006 Amphony. All rights reserved. The information contained herein is subject to change without notice.
Limited warranty WHAT YOUR W ARRANTY COVERS This warranty extends only to the original user of the equipment (“you”, ”your”) and is limited to the purchase price of each part. Amphony and it’s affiliated companies (”we”, ”our”, ”us”) warrant this Wireless Headphone Set against defects in materials or workmanship as follows.
An important point after buying a device Amphony H500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Amphony H500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Amphony H500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Amphony H500 you will learn all the available features of the product, as well as information on its operation. The information that you get Amphony H500 will certainly help you make a decision on the purchase.
If you already are a holder of Amphony H500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Amphony H500.
However, one of the most important roles played by the user manual is to help in solving problems with Amphony H500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Amphony H500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
