Instruction/ maintenance manual of the product HS-93 NuTone
Go to page of 2
READ AND SA VE THESE INST ALLA TION INSTRUCTIONS! Accessor y Switch MODEL: HS-93 INST ALLA TION Used with Heat–Vent–Light Combination. 1. Install a double–gang box. 2. Refer to Figure 1. Run power wiring from fuse box or circuit breaker and wiring from heat–vent–light wires to outlet box.
Product specifications subject to change without notice. 4820 Red Bank Road, Cincinnati, Ohio 45227 Printed in U.S.A., Rev. 03/2001, Part No. 89485 ® One Y ear Limited W arranty WARRANTY OWNER: NuTon.
An important point after buying a device NuTone HS-93 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NuTone HS-93 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NuTone HS-93 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NuTone HS-93 you will learn all the available features of the product, as well as information on its operation. The information that you get NuTone HS-93 will certainly help you make a decision on the purchase.
If you already are a holder of NuTone HS-93, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NuTone HS-93.
However, one of the most important roles played by the user manual is to help in solving problems with NuTone HS-93. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NuTone HS-93 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
