Instruction/ maintenance manual of the product AXIS 8 Premium Numark Industries
Go to page of 20
AXIS 8 Premium CD Player Owner Manual ©2001 Industries http://www.numark.com.
AXIS 8 - The Leader in DJ Technology ©2001 Numark Industries - 2 - http://www.numark.com SAFETY INSTRUCTIONS a) Read Instructions - All the safety and operating instruction s should be read before this product is conne cted and used. b) Retain Instr uctions - The safety and operating in structions should be kept for future reference .
AXIS 8 - The Leader in DJ Technology ©2001 Numark Industries - 3 - http://www.numark.com TABLE OF CONTENTS Safety and Warnings (PLEASE READ) 2 Table of Contents 3 Introduction Letter from the Enginee.
AXIS 8 - The Leader in DJ Technology ©2001 Numark Industries - 4 - http://www.numark.com ® AXIS 8 PREMIUM TABLETOP CD PLAYER Congratulations, you are now the ow ner of one of the most tech nically advanced pieces of DJ equipment ever developed. The AXIS 8 is the result of many years of development a nd se veral NUMARK exclusive patents.
AXIS 8 - The Leader in DJ Technology ©2001 Numark Industries - 5 - http://www.numark.com SETUP AND CONNECTIONS Typical connection with a mixer is illustrated below .
AXIS 8 - The Leader in DJ Technology ©2001 Numark Industries - 6 - http://www.numark.com FEATURES 1. PLAY/STUTTER- To start the mus ic from the initial cue point. 2. PAUSE- To pause the music. 3. CUE- To move the mus ic to the cue point and preview the selection.
AXIS 8 - The Leader in DJ Technology ©2001 Numark Industries - 7 - http://www.numark.com 25. Power Switch- Turn on and t urn off the machi ne with this but ton. The unit should alway s be shut down wit h this button firs t before any external power is removed.
AXIS 8 - The Leader in DJ Technology ©2001 Numark Industries - 8 - http://www.numark.com BASIC OPERATIONS Open/Close: Press to load or eject the disc. The drawer will aut omatically close to protect the tray from accidental damage while open. NOTE: Tray will not open if the disc is in play.
AXIS 8 - The Leader in DJ Technology ©2001 Numark Industries - 9 - http://www.numark.com SETTING CUE POINTS PLAY and CUE Pressing the “PLAY” button starts the disc. Pressing the “CUE” button will reset the disc to the last place where the disc was started.
AXIS 8 - The Leader in DJ Technology ©2001 Numark Industries - 10 - http://www.numark.com ADJUSTING PITCH Pitch Range: actives the pitch slider and adjusts the amount of control the pitch slider has on the overall speed of music. On depression of will toggle the slid er on and off.
AXIS 8 - The Leader in DJ Technology ©2001 Numark Industries - 11 - http://www.numark.com BPM: This button is used for resetting the downbeat and also re-calibra ting the BPM.
AXIS 8 - The Leader in DJ Technology ©2001 Numark Industries - 12 - http://www.numark.com LOOPING OPERATIONS LOOPING A loop is any area of a CD that you choose to repeat with no breaks. On the AXIS 8 two seamless loops are possible. LOOP IN The “LOOP IN” point is where you wish for t he loop to start.
AXIS 8 - The Leader in DJ Technology ©2001 Numark Industries - 13 - http://www.numark.com MOVING LOOP POINTS The “ LOOP IN ” point can be moved while the music is playing just by pressing at the new desired point. The next time “LOOP OUT” is reached the CD will return to this new “LOOP IN” point.
AXIS 8 - The Leader in DJ Technology ©2001 Numark Industries - 14 - http://www.numark.com SPECIAL EFFECTS Your AXIS 8 is equipped with some of most advanced effects on the market today. To fully take advantage of these effects it’s helpful to practice and understand their use.
AXIS 8 - The Leader in DJ Technology ©2001 Numark Industries - 15 - http://www.numark.com A.D. (Artificial-Dissemination) – Reduces the bit rate of the music creating increasing distortion with intensity. CHOP – This effect works best when the Beatkeeper™ is properly aligned.
AXIS 8 - The Leader in DJ Technology ©2001 Numark Industries - 16 - http://www.numark.com PROGRAM FUNCTIONS This button provides several programmable functions depending upon the combination of buttons used. Track Sequence Programming - Depress while the unit is stopped and “ ” will light.
AXIS 8 - The Leader in DJ Technology ©2001 Numark Industries - 17 - http://www.numark.com RELAY PLAY This mode will be operational only when 2 units are connected via a relay cable. 1. Insert CDs into both of the units. 2. We recommend putting both sides in SINGLE play mode while learning this function.
AXIS 8 - The Leader in DJ Technology ©2001 Numark Industries - 18 - http://www.numark.com BEFORE SWITCHING OFF THE POWER: When you have fin ished using th e CD player, be sure t hat the disc tray is closed wit h the “OPEN/CLOSE” button before switchin g off the p ower.
AXIS 8 - The Leader in DJ Technology ©2000 Numark Industries - 19 - http://www.numark.com SPECIFICATIONS TECHNICAL Disc Type Standard Compact discs (12 cm & 8 cm) Time Display Track Elapsed, Track Remain, or Total Remain Quantization 1 bit linear/Channel, 3 Beam Laser Oversampling rate 8 Times Sampling Frequency 88.
® Professional Disc Jockey Products LIMITED PRODUCT WARRANTY 1. What is covered and for how long? NUMARK INDUSTRIES LCC ("NUMARK") warrants to the orig inal purchaser that NUMARK'S DJ .
An important point after buying a device Numark Industries AXIS 8 Premium (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Numark Industries AXIS 8 Premium yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Numark Industries AXIS 8 Premium - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Numark Industries AXIS 8 Premium you will learn all the available features of the product, as well as information on its operation. The information that you get Numark Industries AXIS 8 Premium will certainly help you make a decision on the purchase.
If you already are a holder of Numark Industries AXIS 8 Premium, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Numark Industries AXIS 8 Premium.
However, one of the most important roles played by the user manual is to help in solving problems with Numark Industries AXIS 8 Premium. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Numark Industries AXIS 8 Premium along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
