Instruction/ maintenance manual of the product 9820 T Nokia
Go to page of 33
S 1 Bruksanvisning Owner’ s Manual MEDIAMASTER 9820 T.
GB 3 MEDIAMASTER 9820 T Contents GENERAL OPERA TION OF THE MEDIAMASTER 4 FOR YOUR SAFETY 4 REMOTE CONTROL 5 Rear Panel 6 Front Panel 6 ABOUT THE SMAR TCARD 7 Subscription TV Services with a Smartcard .
GB 4 GENERAL OPERA TION OF THE MEDIAMASTER Throughout this manual you will notice that the everyday opera- tion of your Mediamaster is based on a series of user friendly on- screen displays and menus. These menus will help you get the most from your Mediamaster , guiding you through installation, channel selection, viewing and many other functions.
GB 5 T o switch the Mediamaster in and out of standby mode. EXIT TV T o return to the viewing mode from a menu without stor - ing settings (in menu mode). T o turn the sound off/on (mute). - + T o adjust the volume of digital programmes. The Mediamaster’ s maximum level is controlled by the TV’ s present volume setting.
GB 6 44 10285 230 V ± 15% 50 Hz WARNING! DO NOT OPEN – ELECTRICAL SHOCK HAZARD DIGIT AL AUDIO AUDIO R L TV AERIAL TELEPHONE SERIAL AUX TV TV / VCR AUDIO L R phono connectors Stereo outputs for conn.
GB 7 Subscription TV Services with a Smartcard (Viaccess) Only for subscription TV services coded with the Viaccess CA system. • Insert your Smartcard fully into the left slot behind the lid of the front panel of the Mediamaster . The gold chip should face downwards and inwards .
GB 8 The box for your Mediamaster should contain the following items: • the Mediamaster • a remote control with 2 AAA batteries • a SCART lead (fully featur ed 1,0 metre) • an aerial/RF lead (.
GB 9 • Certain outdoor antennas are pointed at an analogue slave transmitter . The roof antenna should be pointed at a digital TV transmitter . • It is not always advisable to position the antenna as high as possible. If problems arise, experiment with different antenna heights.
GB 10 Connecting the Mediamaster to the TV • Connect a SCART lead between the main SCAR T socket on the TV and the TV SCART socket on the Mediamaster . • Connect an RF lead from the TV/VCR output on the Mediamaster to the RF input socket on the TV .
GB 11 Connecting an Analogue Satellite Receiver and VCR Connecting a HiFi system • Connect an RCA/Cinch stereo cable from the AUDIO L R sockets on the Mediamaster to the LINE, AUX, SP ARE or EXTRA input sockets on your HiFi system.
GB 12 This procedure is necessary only if your Mediamaster is con- nected to the TV with an RF lead and no SCAR T leads are used T o tune your TV to the RF signal you might also need your TV manual in addition to this manual. The steps below explain what to do if you have been unable to use SCAR T leads in your con- nection.
GB 13 Language Select the desired menu language. This will also be the main language for audio and subtitling. General Information Once you have correctly connected the Mediamaster , you also have to perform a “First T ime Installation.” During this procedure, helpful information is displayed at the bot- tom of the menus.
GB 14 FIRST TIME INST ALLA TION Channel Search The Channel Search procedure can be performed in two differ - ent ways. • “Automatic Search” or “Manual Search.” Manual Search When you perform a Manual Search you first need to enter some parameters for the channel search to work.
GB 15 VIEWING MODE General Information The following describes the basic functions of your Mediamaster while watching terrestrial digital TV . Some of the functions described here are dependent on the Service Provider and can only be used if they are included in the transmitted programme information.
GB 16 VIEWING MODE The “i” (Information) Button The Mediamaster has the ability to display information about pro- grammes currently being broadcast as well as those being broad- cast next. By pressing the “ i ” button while watching TV you will get a spe- cial Programme Information Banner .
GB 17 List of TV Channels At the channel search procedure, a Channel lists named “Chan- nels” containing all channels are created. In the “Channels” list scrambled channels are marked with a pic- ture of a Smartcard (if this information is transmitted in the sig- nal) and locked channels are marked with a padlock.
GB 18 VIEWING MODE TV Release (0) With the 0 button you can toggle between: digital terrestrial TV analogue terrestrial TV video (the video must be on) (This is only valid if the units are connected via SCAR T cables, and not by a RF connection.
GB 19 MAIN MENU General Information Many of the functions of the Mediamaster are available from the Main Menu. • Press MENU to open it. Channels Please refer to “List of TV channels” on page 17. Edit Channels From these menus you can create and edit channel lists.
GB 20 Create list From here you can create your own favourite lists, containing the channels you watch most frequently . Y ou can give each list a spe- cific name, e.g. “Sport” or “Films.” When a favourite list is selected, you see only those channels defined in the list.
GB 21 Select Channels From this menu you add and remove the channels in your Favour - ite Lists. Y ou use the “All TV” list as basis to select the channels from. A channel is added or removed by pressing the OK button. The square to the right on a line will be empty for removed channels, and will contain an “x” for added channels.
GB 22 Rearrange Channels From here you can arrange the sequence for the channels within your favourite lists. • With , mark the channel you want to move to a new posi- tion within the list. • Press again and the right side of the marked channel will change to .
GB 23 MAIN MENU System Configuration Y ou will be asked to enter your access code before you can open this menu. The code is preset to 1234 from the factory .
GB 24 MAIN MENU TV Settings From here you can adjust settings concerning your TV . TV screen format Select your TV screen format. The 4:3 format is the standard format for most TV screens.
GB 25 MAIN MENU Receiver Upgrade In order to keep the Mediamaster up-to-date, it will be possible to download new versions of the system software via satellite and from the Internet. New software may include new or im- proved features for existing menus.
GB 26 MAIN MENU Appearance Preferences Banner time-out When you switch channels, an information banner will be shown for a few seconds. Y ou can select for how long the banner will be shown. V olume bar Select whether or not you want the volume bar to appear on the screen when you change the volume.
GB 27 MAIN MENU System Information If you have to contact your service provider or a service center , they might ask for information available from this menu.
GB 28 Conditional Access This menu will only be activated if you have inserted a valid Smartcard/CA module in the slot behind the front lid. If more than one CA system is activated, select the one from which you want information. The V iaccess Conditional Access (CA) System is embedded in the Mediamaster .
GB 29 GLOSSARY OF TERMS Access Authorisation to use the coding system to purchase / order TV programmes. Audio system With digital satellite reception, the sound is transmitted in packages and is selected either in a special audio mode or pre-selected by using the installation set-up.
GB 30 PROBLEM SOL VING Problem The display on the front panel does not light up/is not lit. No sound or picture, but the front panel shows the time or - - : - -. Bad picture/blocking error . The front panel shows a channel number , but you can’t see anything from digital TV .
GB 31 PROBLEM SOL VING FRONT P ANEL DISPLA Y Channel number in TV mode. The Mediamaster is in standby mode, and current time is shown. In TV mode. RF channel in tuning mode. Lights when no signal is being re- ceived. Flashes when pressing a button on the remote control.
GB 32 TECHNICAL SPECIFICA TIONS T ransmission Standards DVB, MPEG 2 RF input (OFDM)/Modulator output Loop through output Input/output connector IEC female / IEC male RF input frequency 470 to 862 MHz .
GB 33 Main Menu 1 Channels 2 Edit Channels 3 Guide 4 System Configuration 5 User Preferences 6 System Information 7 Viaccess Embedded System Configuration 1 Channel Search 2 TV Settings 3 Modem Config.
S 2 66 76938-11 © 0008 44 10285 230 V ± 15% 50 Hz WARNING! DO NOT OPEN – ELECTRICAL SHOCK HAZARD DIGIT AL AUDIO AUDIO R L TV AERIAL TELEPHONE SERIAL AUX TV TV / VCR Nokia is a registered trademark of Nokia Corporation www .
An important point after buying a device Nokia 9820 T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nokia 9820 T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nokia 9820 T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nokia 9820 T you will learn all the available features of the product, as well as information on its operation. The information that you get Nokia 9820 T will certainly help you make a decision on the purchase.
If you already are a holder of Nokia 9820 T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nokia 9820 T.
However, one of the most important roles played by the user manual is to help in solving problems with Nokia 9820 T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nokia 9820 T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
