Instruction/ maintenance manual of the product CR-3510 Humax
Go to page of 39
Important Safeguards ................................... 1 ~ 4 Support & Copyright .................................... 5 Reference .................................................... 6 Connecting the Set-T op Box ......................... 7 ~ 10 Remote Control Unit .
1 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference that may cause undesired operation. This television receiver provides display of television closed captioning in accordance with §15.
2 Always be careful when using your product. T o reduce the risk of fire electrical shock and other injuries, keep these safety precautions in mind when installing, using and maintaining your machine. • Read all safety and operating instructions before operating your product.
3 • Operate your product only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your appliance dealer or local power company . • Use only a grounded or polarized outlet.
4 • Do not attempt to service the product yourself. Refer all servicing to qualified service personnel. Unplug the unit from the wall outlet and refer servicing to qualified service personnel under .
Support & Copyright First and foremost, our knowledge of the set top box marketplace along with technical expertise differentiates HUMAX. Moreover , we maintain very close working relationships with our customers.
Reference T o the digital receiver , you can connect either a single satellite antenna directly or through converter box several antennas or LNB of multi-feed equipment. Y ou can connect a further Sat-receiver (for example analog), with the receiver of common antenna equipment that has satellite signals.
Connecting the Set-T op Box LNB IN Use to connect an antenna. LNB OUT Use it when connecting to another STB. RS-232C Use it when connecting to your PC. S-VIDEO Use to connect an S-VIDEO signal from your STB to an S-VIDEO input jack on a VCR or TV . RCA AUDIO OUTPUT Use to connect an audio signal from your STB to an audio input jack on a VCR or TV .
From Cable/ Antenna Source TV Rear Panel 1. Connect a parabola antenna cable to the LNB IN jack. Connect an AIR or Cable Box Antenna out terminal to the RF IN jack. 2. Connect between the RF OUT jack on the STB and the ANT INPUT (RF INPUT) jack on the TV .
1. Connect a parabola antenna cable to the LNB IN jack. Connect an AIR or Cable Box Antenna out terminal to the RF IN jack. 2. Connect between the RF OUT jack on the STB and the ANT INPUT (RF INPUT) jack on the TV . 3. Connect a set of audio, video cables between the AUDIO, VIDEO OUT jacks on the STB and the AUDIO, VIDEO INPUT jacks on the TV .
TV Rear Panel VCR Rear Panel From Cable/ Antenna Source 1. Connect a parabola antenna cable to the LNB IN jack. Connect an AIR or Cable Box Antenna out terminal cable to the RF IN jack. 2. Connect between the RF OUT jack on the STB and the ANT INPUT (RF INPUT) jack on the TV .
ST ANDBY TV/SA T (Reserved) TV/RADIO MUTE MENU CURSOR OK P+/P- HELP EPG RCL (Recall) RS-101N NUMBER BUTTONS INFORMA TION (RED) SOUNDTRACK (GREEN) SUBTITLE (Reserved) P AUSE (BLUE) EXIT V+/V - TIME (WH.
• Please note : The design of Remote Control Unit may be changed without notice in advance. 10 13 11 14 12 15 16 17 18 19 TV/SA T (Reserved) TV/RADIO Press to switch between TV and Radio modes. MUTE Press to temporarily cut off the sound. MENU Press to display the Main Menu on the screen or return to the screen from a sub menu screen.
13 The details of Service Part and Event Part are automatically displayed on the I-Plate when pressing the( )button or changing services. I-Plate is divided into Service Part and Event Part.
14 T o change services, do in the following sequence: 1. Press the Number buttons(0~9) on the remote control. 2. Press the buttons or buttons. Or press the Recall( ), Service-List( ), EPG( )button. T o switch between TV and Radio services, press the TV/Radio ( )button.
T o select the desired service in the service list, you should firstly display the service list using button. Use buttons to select a service and press button. Also use buttons to select a service directly in the service list. The Service List consists of Service All and Service Favorite.
16 Y our STB has an Electronic Program Guide(EPG) to help you navigate through all the possible viewing options. The TV Guide supplies information such as program listings and start and end times for all available services. In addition, detailed information about the program listings and start and end times for all available services.
17 Y ou can watch a program being shown and reserve it in the TV Guide mode. T o enter the TV Guide mode Press the EPG( )button on the remote control unit or select the TV Guide on the Main Menu. T o select the TV/Radio Guide Press the button on the remote control unit and TV Guide will be switched to the Radio Guide.
18 Weekly mode Shows the information of programs that will be played for a week. Select a day you want using the buttons. T o watch and reserve a program you want, do the same steps with the NOW/NEXT mode. Shows the program lists that you have already reserved on the TV Guide or Information Box.
19 Y ou can set a parental guidance rating to each program in this mode. 1. When the button is pressed after selecting the highlighted parental control on the initial menu screen, a display window for entering the PIN Code will appear on the center of screen.
20 Select the language for Menu, Audio or Subtitle. 1. Select the highlighted Language Setting using the buttons in the System Setting mode and then press the button. 2. Select the highlighted Menu(or Audio, Subtitle) Language and press the buttons and the language list will be displayed.
21 Time Setting Y ou can set the Current T ime and Wakeup Time in this mode. Furthermore, the Service Number in the W akeup T ime mode and Sleep T ime (standby mode) can be set. When a VCR is connected, recording can be automatically done according to W akeup/Sleep T ime Setting.
22 A/V Output Setting Set the Audio mode which is output from RCA/Cinch Jack. (Stereo/Mono) Select the aspect ratio of TV which is connected to STB(4:3 or 16:9). Select the format which the video is to be displayed on screen. When your TV set is 4:3 and video source is 16:9, STB will display in Letter-box or Center mode as selected.
23 3-2. Service Organizing This menu gives users access to options that allow them to organize their Networks, TV services and Radio services. ** The default PIN Code is . Organize services that are included in memory for TV . Delete, Move, Lock, Skip or Rename each TV service on all TV service list.
24 • Lock 1. Use the buttons to select a service to be locked by your PIN Code. 2. Press the Y ellow( )button and the symbol ( ) will be displayed at the right side of the service name.
Delete, Move, Lock, Skip or Rename each TV service in a favorite TV group and re-group them into your favorite TV group. This mode has the same operating methods as “Organize All Services”. Moving the favorite group from the service group: 1. Press the button to move to “Services”-Plate (right window).
26 3-3. Service Searching Search for new services. This mode includes Antenna Setting and Manual Search. Select LNB parameters and switching connections. Use the buttons to select an antenna number for the required satellite. Antenna alternative 16 is fixed for SMA TV and its name can’t be changed.
27 Find the services manually in the transponder you select. This search mode included normal advanced and SMA TV search. Use the buttons to select an antenna number for the required satellite. The satellite name will help you select antennas. If you want to search in SMA TV mode, then select the Antenna Alternative 16.
28 Press the button to find services using PIDs and more items for selecting PIDs will be displayed. Press the button and Video, Audio and PCR PID items will be added. Enter the PID values for Video, Audio and PCR. When the Number buttons(0~9) are pressed, a hexadecimal table will be displayed.
29 The user will select a single program provider by selecting its distributor label and you can get the information of available entitlements. • Subscription Y ou can see the valid period of each service. • PPV (Pay Per View) If Y ou purchased events in advance, the entitlements of Pay Per View events will be displayed.
The STB can receive maximum 10 mails from program providers. T o check and see the mails press the button. In the Mail list you can view or delete the mails. If you store 10 mails and a new mail arrives, the oldest mail will be erased and the new mail will be stored.
31 Does not display any LED on the front panel or STB has no power . • Check the main power cable and check that it is plugged into a suitable power outlet. • Check whether STB is in Standby mode. No Picture • Ensure that the STB is switched on (see above).
32 Amber only: Invalid system ID • Check whether the system ID is different for Software and STB. Amber & Red: Incorrect data block CRC error • Y ou need to contact your retail shop. Amber & Red & Green: Incorrect application CRC error • Y ou need to contact your retail shop.
33 System Setting TV Guide Parental Control Language Setting Time Setting A/V Output Setting Service Organizing Organize TV Services Organize Radio Services Organize Networks Main Menu Other Setting VHF T uning Current Time Wakeup Time Sleep Time Wakeup Service No.
34 Installation Utility Service Searching Antenna Setting Calender Biorthythm Manual Search Conditional Access General Smart Card Information Default Setting Antenna Alternative Satellite Name LNB Frequency 22KHz Tone DiSEqC Input Antenna Alternative Frequency Polarization Symbol Rate FEC Network Search Automatic Skip Advanced.
35 T uner & Channel MPEG T ransport Stream A/V Decoding Memory Input Connector Frequency Range Input Impedance Signal Level IF IF Band width LNB Power & Polarisation 22 KHz T one DiSEqC Contro.
36 A/V & Data In/Out VIDEO AUDIO R/L RS-232C S-VIDEO RCA/Cinch RCA/Cinch V olume and Mute Control (Resolution : 20 bits DAC, Max. 2 V rms) T ransfer rate 1 15,200 bps, 9pin D-sub T ype Y -C separa.
HTCR3510.700.
4 • Do not attempt to service the product yourself. Refer all servicing to qualified service personnel. Unplug the unit from the wall outlet and refer servicing to qualified service personnel under .
An important point after buying a device Humax CR-3510 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Humax CR-3510 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Humax CR-3510 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Humax CR-3510 you will learn all the available features of the product, as well as information on its operation. The information that you get Humax CR-3510 will certainly help you make a decision on the purchase.
If you already are a holder of Humax CR-3510, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Humax CR-3510.
However, one of the most important roles played by the user manual is to help in solving problems with Humax CR-3510. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Humax CR-3510 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
