Instruction/ maintenance manual of the product VKE-103 AstroStart
Go to page of 8
© 2006 Astroflex Electronics, Inc. - All rights reserved VKE-103 REMOTE KEYLESS ENTR Y O WNER ’ S MANUAL ® 2006 ASTROFLEX ELECTRONICS.
© 2006 Astroflex Electronics, Inc. – All rights reserved Table of contents What is included ............................................................................................................................... ............................
What is included The control module Super heterodyne receiver Two three-button transmitters A status LED indicator light A push-button Valet ® switch Important information Congratulations on the purchase of your keyless entry system.
Transmitter functions The receiver uses a computer-based learn routine to learn the transmitter buttons. This makes it possible to assign any specific transmitter button , or combination of bu ttons, to any receiver function.
off. After the ignition has been turned off, the status LED flashes slowly to indicate that the AED will be activated then, the LED flashes no rmally when AED has been activated. Note : For AED to be effective, the Failsafe ® Starter Kill relay must be installed.
To enter or exit Valet ® Mode: 1. Turn the ignition on. 2. Turn the ignition off. 3. Press and release the Valet ® switch within 10 seconds. The status LED will light stea dily if you are entering Valet ® Mode and will turn off if you are exiting Valet ® Mode.
© 2006 Astroflex Electronics – All rights reserved 5 Dome light Supervision Activated or Deactivated: The dome light will illuminate for 30-seconds after turning the ignition off or when disarming the system with the remote transmitter. Glossary of terms Control Unit : The “brain” of your system.
QUICK REFERENCE GUIDE Locking (1) To lock the system press for one second. The doors will lock (if connected). The LED will begin to flash. The Failsafe® Starter Kill wi ll prevent the vehicle’s starter from cranking if it has been i nstalled.
An important point after buying a device AstroStart VKE-103 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AstroStart VKE-103 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AstroStart VKE-103 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AstroStart VKE-103 you will learn all the available features of the product, as well as information on its operation. The information that you get AstroStart VKE-103 will certainly help you make a decision on the purchase.
If you already are a holder of AstroStart VKE-103, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AstroStart VKE-103.
However, one of the most important roles played by the user manual is to help in solving problems with AstroStart VKE-103. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AstroStart VKE-103 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
