Instruction/ maintenance manual of the product C 120.4 Nilfisk-ALTO
Go to page of 18
Nilfi sk C 120.4 User Manual.
3 Inde x 1 Saf ety precautions and warnings ............................................. 3 2 Description ............................................................................... 4 3 Bef ore you star t using your pressure w asher ..............
4 Extension cables should be of a watertight constr uction and comply with the below-men- tioned requirements f or length and cable dimensions . 1.0 mm² max. 12.5 m 1.5 mm² max. 20 m 2.5 mm² max. 30 m z Cable connections should be kept dry and off the ground.
5 2.2 Operation elements and model survey See illustration at the end of this manual. 1 Star t/stop switch 2 W ater inlet (with fi lter) 3 High pressure connection 4 High pressure hose 5 Electric cab.
6 3.3 Mounting of quick coupling 1. Screw the quic k coupling tight on to the water inlet (2). Note: The inlet fi lter must al- wa ys be fi tted in the w ater inlet pipe to fi lter out sand, lime stone and other impurities as these will damage the pump v alves .
7 4.2 Mounting of spray lance and Click & Clean nozzles , Note: The spra y lance (6) has a built-in lo w pressure nozzle that can be used f or fl ushing aw a y dir t. 2. Attach the nozzle. W arning: When attaching the Click & Clean nozzles, the pawl on the side of the spra y lance should come out again.
8 4.4 Start and stop of the machine (when con- nected to a water supply) The spra y lance is aff ected by a thrust during operation - theref ore alwa ys hold it fi r mly with both hands. IMPORT ANT : P oint the nozzle at the ground. 1. Check that the machine is in upright position.
9 5 Fields of application and w orking methods 5.1 General Effi cient high presure cleaning is achiev ed by f ollowing a fe w guide- lines, combined with y our own personal e xper ience of specifi c cleaning tasks. Accessor ies and detergents, when correctly cho- sen, can increase the effi ciency of your pressure washer .
10 5.2 T ypical fi elds of application Below y ou will fi nd a description of a lot of cleaning tasks which can be solved b y a pressure washer from Nilfi sk in association with accessor ies and detergents.
11 , 6 After using y our pressure washer 6.2 Winding up of electric cable and high pressure hose carefully up . Wind up the electric cable on the appropriate hooks. Built-in clip f or good holding. The low er hook can be tur ned to release the electric cable.
12 W ARNING! Alwa ys disconnect the electrical plug from the sock et prior to maintenance or cleaning. T o ensure a long and problem free working life , please take the f ollowing advice: z Wash out w ater hose, high pressure hose, spr ay lance and accessories before mounting.
13 7.1 Cleaning of water inlet fi lter Clean the water inlet fi lter regularly once a month or more frequently according to use. Carefully loosen the fi lter with a screwdriv er and clean it.
14 8 T r oub le-shooting T o av oid unnecessary disappointments, you should chec k the f ollowing bef ore contacting the Nilfi sk ser vice organization: Symptom Cause Recommended action Machine refuses to start Machine not plugged in Plug in machine.
15 9 Fur ther inf ormation 9.1 Recyc ling the washer Make the old cleaner un usable immediately . 1. Unplug the cleaner and cut the electric cable. Do not discard electrical appli- ances with household waste .
16 9.3 Accessories Only use original accessor ies. Click & Clean Car nozzle Special nozzle f or enameled surfaces . Optimal distance: 30 - 50 cm. Click & Clean Undershassis nozzle 90° angled special nozzle f or undercarriage and wheel arches.
17 EU Declaration of Conf ormity Product: High Pressure Washer T ype: Nilfi sk C 120.4 Description: 230 V 1~, 50 Hz - IP X5 The design of the unit corre sponds to the following pertinent regulations:.
11 5.
128303202 a (01.2008) Nil fi sk, Division of Nil fi sk-Advance A/S, Industrivej 1, DK - 9560 Hadsund, tel.: (+45) 7218 2100.
An important point after buying a device Nilfisk-ALTO C 120.4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nilfisk-ALTO C 120.4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nilfisk-ALTO C 120.4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nilfisk-ALTO C 120.4 you will learn all the available features of the product, as well as information on its operation. The information that you get Nilfisk-ALTO C 120.4 will certainly help you make a decision on the purchase.
If you already are a holder of Nilfisk-ALTO C 120.4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nilfisk-ALTO C 120.4.
However, one of the most important roles played by the user manual is to help in solving problems with Nilfisk-ALTO C 120.4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nilfisk-ALTO C 120.4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
