Instruction/ maintenance manual of the product C 120.1 Nilfisk-ALTO
Go to page of 18
Nilfi sk-AL T O C 120.1 User manual 08.01.2007.
Printed in China Copyright © 2007 Nilfisk-AL T O.
3 Inde x 1 Safety precautions and w ar nings .............................................3 2 Description ............................................................................... 4 3 Before y ou star t using your pressure washer ...............
4 Extension cables should be of a watertight constr uction and comply with the below-men- tioned requirements for length and cable dimensions. 1.0 mm² max. 12.5 m 1.5 mm² max. 20 m 2.5 mm² max. 30 m z Cable connections should be kept dry and off the ground.
5 3 Bef ore y ou star t using y our pressure washer 3.1 Mounting of trolley handle (models with trolley handle) 1. Remove the label on top of machine. 2. Push down the trolley handle (12) into the machine. Secure the handle by tightening the 2 screws.
6 4 Operating y our pressure washer 4.1 Connection of high pres- sure hose 1. Mount the high pressure hose on the outlet (3). 4.2 Mounting of spray lance and Click & Clean nozzles , Note: The spra y lance (6) has a built-in low pressure nozzle that can be used for fl ushing awa y dir t.
7 4.3 W ater connection 4.4 Start and stop of the machine (when con- nected to a water supply) The machine must not be operated while hanging on the wall hook! The spra y lance is affected by a thrust during operation - therefore alw ays hold it fi rmly with both hands.
8 4.5 Start the machine (when connected to open con- tainers (suction mode)) The washer can take in w ater from a rain water tank as an example . The hose f or the wa- ter supply must not be too long, approx. 5 m. Make sure that the water tank is not placed on a lower le vel than the machine.
9 5.2 T ypical fi elds of application Below you will fi nd a description of a lot of cleaning tasks which can be solved by a pressure w asher from Nilfi sk-AL T O in association with accessories and detergents.
10 , 6 After using y our pressure washer 6.2 Winding up of electric cable and high pressure hose T o av oid accidents, the electric cable and the high pressure hose should alwa ys be winded carefully up. 1. Wind up the electric cable on the appropriate hooks.
11 W ARNING! Alwa ys disconnect the electrical plug from the sock et pr ior to maintenance or cleaning. T o ensure a long and problem free working life , please take the follo wing advice: z Wash out water hose , high pressure hose, spra y lance and accessories before mounting.
12 7.1 Cleaning of water inlet fi lter Clean the water inlet fi lter regularly once a month or more frequently according to use. Carefully loosen the fi lter with a screwdriver and clean it.
13 8 T r ouble-shooting T o av oid unnecessar y disappointments, you should chec k the following bef ore contacting the Nilfi sk- AL TO service organization: Symptom Cause Recommended action Machine refuses to start Machine not plugged in Plug in machine .
14 9 Fur ther inf ormation 9.1 Recycling the washer Make the old cleaner unusab le immediately . 1. Unplug the cleaner and cut the electric cable. Do not discard electrical appli- ances with household waste.
15 9.3 Accessories Only use original accessories. Click & Clean Car nozzle Special nozzle for enameled surf aces. Optimal distance: 30 - 50 cm. Click & Clean Undershassis nozzle 90° angled special nozzle for undercarriage and wheel arches. Integrated guide shoes.
16 EU Declaration of Conf ormity Product: High Pressure Washer Ty p e : Nilfi sk-AL TO C 120.1-6 / C 120.1-10 Description: 230 V 1~, 50 Hz - IP X5 The design of the unit corre sponds to the following.
.
126486032 (01.2007) http://www .nilfi sk-alto .com FRANCE Nilfi sk-AL T O AL T O France SAS Aéroparc 1 19 rue Icare 67960 Entzheim T el.: +33 3 88 28 84 00 F ax: +33 3 88 30 05 00 E-mail: info@nilfi sk-alto .fr www .nilfi sk-alto.com GERMANY Nilfi sk-AL T O Division of Nilfi sk-Advance A G Guido-Oberdorfer-Strasse 10 89287 Bellenberg T el.
An important point after buying a device Nilfisk-ALTO C 120.1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nilfisk-ALTO C 120.1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nilfisk-ALTO C 120.1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nilfisk-ALTO C 120.1 you will learn all the available features of the product, as well as information on its operation. The information that you get Nilfisk-ALTO C 120.1 will certainly help you make a decision on the purchase.
If you already are a holder of Nilfisk-ALTO C 120.1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nilfisk-ALTO C 120.1.
However, one of the most important roles played by the user manual is to help in solving problems with Nilfisk-ALTO C 120.1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nilfisk-ALTO C 120.1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
