Instruction/ maintenance manual of the product HSC 585 Nilfisk-Advance America
Go to page of 13
-1- 11600205211REVA INFORMATION & OPERATING INSTRUCTIONS 10.22.2007 HSC 585 MULTI EXTRACTOR 220 - 240V EU CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTION MANUA.
WARNING! To reduce the risk of fire, electric shock, or injury: • Do not leave the machine unattended when it is plugged-in. Unplug the unit from the power outlet when not in use. • Unplug the machine from the power outlet before cleaning or servicing.
-3- 11600205211REVA INSPECTION: Carefully unpack and inspect your HSC 585-MUL TI f or shipping damage. Each machine is tested and inspected before shipping. Any shipping damage incurred is the responsibilit y of the carrier . Y ou should notif y the carrier immediately if you notice damage to the box or to the machine or parts.
O I I I O O I I SWITCH PLATE 5 HIGH PRESSURE PUMP LIGHT (NO HEA T) DUMP PUMP ON/OFF SWITCH PUMP/HEA T SELECTOR SWITCH 100 PSI PUMP ON/OFF SWITCH 3 VACUUM ON/OFF SWITCH 2 4 HEA T SELECTED LIGHT KNOW YO.
OPERATION REFER TO THE DIAGRAMS ON THE PREVIOUS PAGE HIGH PRESSURE WASHER 1 Before each use, inspect the machine, hoses, and cleaning tools for cleanliness and completeness. Make sure hoses are in good condition and the spray nozzle(s) is tight. REFER TO THE AUTO-FILL AND AUTO-DUMP INSTRUCTIONS ON THE FOLLOWING PAGES.
water to a clear , solid stream. Priming may tak e 20 - 60 seconds, or even longer sometimes, and it will require a full solution tank. When the pump is primed, let off the Power Prime Pedal, and turn off the pump and the vacuum.
3 . If you choose to use the auto-fill feature, connect the fill-hose to the hose connection over the solution tank fill hole. T urn on the water source, and allow the tank to fi ll with solution. NOTE : do not turn the water on to full pressure; water flowing into the auto-fill system does not need a lot of pressure behind it.
Operation: 1 . Attach a garden hose to the auto-fill hose connection above the holding tank fill hole, and connect the other end of the hose to your water source. 2 . Make sure the float that hangs into the solution tank from the auto-fill valve is free of obstruction and can move fr eely .
-9- 11600205211REVA 1 . Befor e each use: if necessary , unscrew the stainless steel filter inside the recov ery tank and clean it. Also make sure the float in the recovery tank is clean. 2 . Attach a garden hose to the automatic pump-out fitting on the back of the base of the machine (refer to illustration below).
23 2 3 4 5 6 7 8 9 10 12 14 17 13 15 20 37 25 23 32 28 18 30 20A 11 1 29 26 16 21 27 31 21A 22 34 24 19 HSC 585 Multi REV A 3.8.08.
ALWAYS USE ONLY ORIGINAL NILFISK PARTS ON YOUR HSC 585 MULTI HSC 585 MUL TI P ART LIST 220 - 240V 1 1 600758501 Reel with hoses, complete 2 1 600758502 Lid kit 3 1 600758503 V acuum air inlet kit 4 1 .
ACCESSORIES HFT-40 TURBO HARD SURFACE TOOL • Use on all types of hard flooring • Cleaning capacity is up to 93 m 2 or 1000 ft 2 /Hr • Lightweight, but robust • Brush ring attachment • No whe.
-13- 11600205211REVA NOTES: MX 585 MULTI Vacuum: Rated Power: Pump: Suction Power: Vacuum at Nozzle: Heat: Suction Width: Weight: Dimensions: 3-stage 2950 W maximum Positive displacement, 83 bar & Demand,7 bar 372 W 30.
An important point after buying a device Nilfisk-Advance America HSC 585 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nilfisk-Advance America HSC 585 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nilfisk-Advance America HSC 585 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nilfisk-Advance America HSC 585 you will learn all the available features of the product, as well as information on its operation. The information that you get Nilfisk-Advance America HSC 585 will certainly help you make a decision on the purchase.
If you already are a holder of Nilfisk-Advance America HSC 585, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nilfisk-Advance America HSC 585.
However, one of the most important roles played by the user manual is to help in solving problems with Nilfisk-Advance America HSC 585. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nilfisk-Advance America HSC 585 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
