Instruction/ maintenance manual of the product Phantom 150 Newcon Optik
Go to page of 8
NEWCON Optik ™ 2005 Printed in Canada OPERATION MANUAL NIGHT VISION MONOCULAR PHANTOM 150 In USA: 3310 Prospect Av e. Clev eland, OH 44115 In Canada: 105 Sparks Av e, Toronto, ON. M2H 2S5 Canada Tel: (416) 663-6963 Fax: (416) 663-9065 Email: NEWCONSA LES@NEWCON-OPTIK.
IMPORTANT INFORMATION Read prior to activation You have just purchased a complicat ed electronic device. To operate it properly, please read this m anual carefully. Here are som e comm on Precautions that must be noted. • NEVER expose the opened objective lens of an active unit i n daylight.
9. ACCEPTANCE CERTIFICATE NIGHT VISION DEVICE PHANTOM 150 Serial Number _______________________________ Model Phantom 150 _____________________ Corresponds to technical cond itions ADSH 3.
CONTENTS 1. Overview i) Application and Features of Phant om 150 ii) Warning iii) Precautions 2. Components 3. Specifications 4 .Construction 5. Operating Instructions 5.1 Pre-starting procedures 5.2 Testing of operation 5.3 Operation at night 5.4 Using interchangeable len ses 5.
7. WARRANTY NEWCON OPTIK warrants this product against defects i n material and workmanship for one year from the date of the ori ginal date of consumer's purchase, but no more than 18 m onths from t he date of delivery being indicated and st amped on the acceptance certificate purchase.
Warning! After transportati on or keeping the device at temperature lower than - 25 ° C (-13 ° F), the device must be warmed up to am bient temperature, from -20 ° C (-4 ° F) to +40 ° C (104 ° F) during 2-3 hours. Precaution Phantom 150 is a preci sion optical instrum ent equipped wit h electronics.
5.4 Using interchangeable len s es. The unit is equipped with PENTAX “screw t ype” removable le ns F 50/1.2, M 42x1. It will accept most Pentax screw type lenses, or using proper adapters, ma ny other lenses. Note: When screwing back the original len s, make sure to insert the lens all the way, to prevent h umidity penetration 5.
NOTE : As the design is being conti nuously im proved some descriptions m ay differ from t hose given above. 4. CONSTRUCTION 3 4 5 1 2 8 7 6 9 10 1- Body 2- Lens Focusing Ring 3- Eye-piece 4- Switch Button for the Scope 5- IR Illuminator Switch 6- IR Illuminator 7- Battery House Cover 8- Lens Cover 9- Carrying Strap 10- Low battery indicat or 8 5.
An important point after buying a device Newcon Optik Phantom 150 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Newcon Optik Phantom 150 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Newcon Optik Phantom 150 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Newcon Optik Phantom 150 you will learn all the available features of the product, as well as information on its operation. The information that you get Newcon Optik Phantom 150 will certainly help you make a decision on the purchase.
If you already are a holder of Newcon Optik Phantom 150, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Newcon Optik Phantom 150.
However, one of the most important roles played by the user manual is to help in solving problems with Newcon Optik Phantom 150. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Newcon Optik Phantom 150 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
