Instruction/ maintenance manual of the product NVS143 AimSHOT
Go to page of 10
North America Distributor Osprey International, Inc. 1 124 T ennessee Street, Suite 101 Cartersville, GA 30121 Fax: +1-770-387-01 14 Email: sales@miniosprey .com Customer Service: +1-770-387-4342 0413 www .aimshot.com NVS143 Night V ision Made in Belarus Packaged in the USA Amstech Incorporated 340 Dewpoint Lane Alpharetta, GA 30022 U.
Page 2 Page 3 Page 4 Page 5 Page 8 Page 9 Page 10 Page 1 1 Page 12 Page 13 Page 16 Page 17 Page 18 T able Of Contents Important Instructions ………………………….
W arranty The manufacturer warrants its product to be free of defects in material and workmanship for the duration of the warranty period. If the product proves to be defective in material or workmanship during the warranty period, the manufacturer will at its sole option repair or replace the product with a like product.
Introduction Thank you for purchasing the NVS143 night vision weapon sight. The following items should be included in the package: • NVS 143 Night Weapon Sight • Carry Case • Manual • IR Searchlight (optional) This night vision sight is designed for hunting in low light and nighttime conditions.
The sighting mark and a target sizes correlation T able 2 (15) Specifications Magnification 3 х Field Of View 12° Min. Focus Distance 5 meters T arget detecting range: At the moonlight (1/4 moon) 200 m In complete darkness (IR searchlight is on) 80… 1 10 m Sight Mark Adj.
Description A General View of the NVS143 Figure 1 (5) Illumination Rates T able 1 Conditions Illumination, lux Moonless night 0,01 ¼ moon 0,05 Moon 0,3 Deep twilight 1,0 T wilight 10 Cloudy day 500 S.
Operation • Switch on the NVS143 with the rotary switch (5) (fig.1). • Aim the NVS143 safely at an object. Adjust focus rings (1) and (2) (fig. 1) • Switch on the IR Searchlight if necessary with the rotary switch (5) (fig.1) by turning it to IR position.
Description 1 Lens Focusing Ring 2 Eyepiece Focusing Ring 3 Eye Shield 4 IR Searchlight 5 Power ON/OFF Switch 6 Correction Mechanism 7 Horizontal Corrections Mechanism 8 V ertical Corrections Mechanis.
Figure 3 Sight Adjustments T o adjust proceed as follows: - Set the weapon with the NVS143 on a solid base - T ake off the lens cover - T urn the Sight ON with the switch (5) (fig.1) - Set the sighting mark to the center position by turning correction mechanisms flywheels (fig.
Рис. 5 Flywheel Scal Mounting T o Weapon Weapon Fastening: The NVS143 can be equipped with one the following fastening brackets (10) (fig.1): - fastening bracket, which have the mounting dimensions of a standard weaver base 63B (21,4 mm) (fig. 4); - 8… 15 mm plank type bracket (fig.
An important point after buying a device AimSHOT NVS143 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AimSHOT NVS143 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AimSHOT NVS143 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AimSHOT NVS143 you will learn all the available features of the product, as well as information on its operation. The information that you get AimSHOT NVS143 will certainly help you make a decision on the purchase.
If you already are a holder of AimSHOT NVS143, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AimSHOT NVS143.
However, one of the most important roles played by the user manual is to help in solving problems with AimSHOT NVS143. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AimSHOT NVS143 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
