Instruction/ maintenance manual of the product NVS 22-2XT Newcon Optik
Go to page of 16
Operation Manual NIGHT VISION RIFLESCOPE NVS 22-2XT 105 Spar ks Ave., Toro nto, ON M 2H 2S5, C anada.
ii IMPORTANT INFORMATION Read prior to activation. You have purchased a sophisticated electronic device. To operate it properly, please read this manual fully. Ignoring operation procedures described in this manual will void your warranty. NEVER Disassemble the unit.
1 TABLE OF CONTENTS 1. BRIEF DESCRIPTION ........................................................... 2 1.1. Overview ......................................................................... 2 1.2. Key features of NVS 22-2XT ..........................
2 1. BRIEF DESCRIPTION 1.1. Overview NVS 22-2XT is a night vision attachment to a daytime weapon scope designed for precise aiming in darkness. The device is equipped with a high-quality electro-optic.
3 2. DESIGN of NVS 22-2XT 4 3 5 9 2 6 1 9 10 8 5 7 11 Fig .1 1 – Device body 2 – Objective lens 3 – Eyepiece 4 – Rubber eyepiece guard 5 – Battery compartment 6 – Objective lens cap 7 –O.
4 3. SPECIFICATIONS Optical Magnificati on, x 1 Field of view, degrees 8 Day Scope m agnificat ion, x : Acceptable Recommended 1-20 3-5 Focus lengt h, mm 110 F-number 1.
5 4. DELIVERY SET NVS 22-2XT is supplied with in the following set: - Device - Objective lens cap - Rubber eyepiece guard - Picatinny rail mount - Operator’s manual (this document) - Warranty card - Soft case - AA Batteries Optional accessories : - IR illuminator - Hard Case 1 pc.
6 5.2. Testing NVS 22-2XT in the daytime Daytime mode of NVS 22-2XT was designed for testing purposes only. Image may be fuzzy. To test the device in the daylight: 1. Turn switch 7 (Fig.1) into ON position. 2. Direct the device at an object within 10-20 m from the viewer.
7 6. INSTALLATION ON A RIFLE 1) Loosen slightly the Clamp screw 11 (Fig. 1) of the adapter rail. 2) Place the NVS-22-2XT onto the Picatinny rail of the fire arm before objective of daytime scope at the minimal distance from it. 3) Tighten the fixing Clamp screws 11 (Fig.
8 daytime riflescope. Thus, it is recommended to estima te if adjustment is required for a night vision sight in combination with daytime riflescope by bore sighting daytime riflescope with and without night vision attachment.
9 7. STORAGE AND MAINTENANCE Warning If NVS 22-2XT has been kept for a long time at temperature lower than - 40 ° C (-40 ° F), then prior to using the device m ust be warmed up at an ambient temperature of -10 ° C (14 ° F) to +40 ° C (104 ° F) with relative humidity below 80%.
10 8. TROUBLESHOOTING 8.1. The scope does not turn on Check whether the batteries are insta lled properly. Check the charge of the batteries. Replace if they are weak. Do not mix old batteries with new ones. 8.2. The target does not appear in focus. Bring the target to the center of the image.
11 9. WARRANTY NEWCON warrants this product against defects in materials and workmanship for one year from the da te of the original purchase, but no more than 12 months from the date of manufacturing. Longer warranty is available, subject to the terms of the specific sales contract.
12 10. CUSTOMER SUPPORT Should you experience any difficulties with your Newcon Optik product, please, consult this manual first. If the problem remains, contact our customer support department at +1(416) 663-6963 or toll fr ee at 1-877-368-6666 (North America onl y).
13 11. ACCEPTANCE CERTIFICATE NVS 22-2XT unit serial number: _______________ ___________ _______ Image Intensifier Tube ser ial number: ______ ______________ Minimum Measured Resolution, lines/mm 45 P.
NEWCON OPTIK ™ 2010 Printed in Canada M711-16/B/IV.
An important point after buying a device Newcon Optik NVS 22-2XT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Newcon Optik NVS 22-2XT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Newcon Optik NVS 22-2XT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Newcon Optik NVS 22-2XT you will learn all the available features of the product, as well as information on its operation. The information that you get Newcon Optik NVS 22-2XT will certainly help you make a decision on the purchase.
If you already are a holder of Newcon Optik NVS 22-2XT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Newcon Optik NVS 22-2XT.
However, one of the most important roles played by the user manual is to help in solving problems with Newcon Optik NVS 22-2XT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Newcon Optik NVS 22-2XT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
