Instruction/ maintenance manual of the product NIGHT VISION MONOCULAR Newcon Optik
Go to page of 13
Unit Designation …..............……….............2 Components ….................….....……..….....3 T echnical Specifications …........................4 Precautions …..........................……............7 Unit Stracture …..
COMPLETE SET Nightwitness body 100 mm / F 1.7 standard lens wrist wrap Desiccant cartridge (2 pcs) S panner for the cartridge AA cell (2 pcs) Cleaning tissue User’s manual Soft carrying bag Optional Interchangeable 25mm/ F 1.
EYEPIECE Focal Length 2 0 ì ì Eye relief 16 ìì Exit pupil dia 7 ìì Diopter adjustment +4, -4 dpt ELECTRICAL Power supply 1 AA Ni-MH rechargeable cell 1.
Nightwitness is a sophisticated precise optical instrument equipped with electronics. Therefore, it should be handled with due care. • Try to avoid strong heat, direct sunlight, impacts, dust, moisture and sudden changes of temperatures. Keep it in mind that, although being very durable, Nightwitness contains fragile components.
Ocular of NVD Nightwitness has a high quality wide angle ocular with magnification of 12,5 õ. The dioptric correction is -4...+4 dtp, as well long eye relief allows for user who wear glasses to use the unit with out removing them.
LOW BA TTER Y AND IR “ON” INDICA TORS Unit “ ON ” indicator (green color), Low battery indicator “Low Battery” (red light), IR indicator “ IR ON” (yellow color) & high light cut off indicator “Bright Light” (blue color) located in the top portion of visible field of view of the NVD.
Infrared ON indicator • (yellow) FUNCTIONS AND INDICA TORS 13 • High Light cut off indicator (blue) Low Battery Indicator • (red) • Power ON indicator (green) Strap holder • Power ON/OFF •.
• Adjust the ocular to your eye sight, rotating the dioptric adjustment ring . • Point the unit towards the object of your surveillance. ⇒ NEVER DIRECT THE LENS IN THE DIRECTION OF BRIGHT LIGHT • For maximum performance focus in on your object by rotating the focusing ring on the objective lens.
USE OF ACCESSORIES Wrist wrap • Insert the end of the wrist wrap in the hole located on the back of the unit. • Tighten the wrist wrap by passing is through hinge, as it is shown on the picture in the right. Mounting the unit on a tripod • Align tripod screw with tripod thread 1/4" located on the right hand side of the body of the unit.
Operation with Photo cameras, V ideo Cameras and CCTV-Systems • Remove the ocular from the unit by unscrewing it from the body of the unit. • Install instead of the ocular , proper photo-video or CCTV-adapter.
• The capacity of the battery in low temperature is decreased. If possible the batteries should always be protected from low temperatures. High temperature operation • Unit functions properly at temperatures up to +40 ° C. • If possible please make sure that battery is protected from high heat and direct sun light.
Moisture collector cap replacement 23 Replacing the moisture cap Moisture cap should be replaced in a clean dry place. New Moisture cap can be exposed for no more than 1-2 minutes.
Should you experience any difficulties with your Newcon OPTIK product, consult the enclosed manual. If the problem remains unresolved, contact our customer support department at (416) 663-6963 or T oll free at 1-877-368-6666. Our operating hours are 9am-5pm, Monday - Friday , Eastern Standard T ime.
An important point after buying a device Newcon Optik NIGHT VISION MONOCULAR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Newcon Optik NIGHT VISION MONOCULAR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Newcon Optik NIGHT VISION MONOCULAR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Newcon Optik NIGHT VISION MONOCULAR you will learn all the available features of the product, as well as information on its operation. The information that you get Newcon Optik NIGHT VISION MONOCULAR will certainly help you make a decision on the purchase.
If you already are a holder of Newcon Optik NIGHT VISION MONOCULAR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Newcon Optik NIGHT VISION MONOCULAR.
However, one of the most important roles played by the user manual is to help in solving problems with Newcon Optik NIGHT VISION MONOCULAR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Newcon Optik NIGHT VISION MONOCULAR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
