Instruction/ maintenance manual of the product NEWCON Image Stabilizer SIB 16X40 Newcon Optik
Go to page of 8
NEWCON 2002© Printed in Canada SIB 16x40 GR BINOCULARS WITH IMAGE STABILIZ ATION In USA: 3310 Prospect A ve. Clevel and, OH 44115 In Canada: 1183 Finch Ave.
IMPORTANT INFORMATION Read prior to activation You have just purchased a complicated electronic dev ice. To operate it properly, please read this m anual carefully.
9. CUSTOMER SUPP ORT Should you experience any difficulties w ith your Newcon OPTIK product, consult the enclosed manual. I f the problem remains unresolv ed, contact our customer support department at (416) 663-6963 or Toll free at 1- 877-398-6666. Our operating hours are 9am- 5pm, Monday - Friday, Standard East Time.
BEFORE USE CAREFULLY READ ALL THE INSTRUCTIONS! FAILURE TO OBEY THE INSTRUCTIONS WILL VOID THE WARRANTY! 1. BRIEF DESCRIP TION SIB 16x40GR Gyro S tabilizing Binoculars is a modern, universal optical d.
7. TROUBL E SHOOTING The stabilizing mode does not work. Check that the batteries are installed properly . Check the charge of the batteries. Replace if they are weak . Do not use old batteries with new ones. The image does not appear in focus. Bring the inspected object to the center of the image.
1 –cartridge with AA type batteries; 2 –connector; 3 –pin; 4 –cramp; 5 –delimiter; 6 –lock Fig. 2 – Power Supply Unit The device is powered by either a cartridg e with batteries (1) or by an on- board power source 12±1.2 V via connector (2).
7. In no less than a minute, press lever 5 (fig . 1) in the arrow indicated direction in order to engage the stabiliz ing mode and hold it in this position while observing.
4. SUPPLIED ACCESSO RIES SIB 16x40 Gy ro is supplied in the following assembly: - Dev ice - Objective lens caps - Carrying Case - Neck Strap - Hand Strap - DC regulator - User’s m anual - Warranty card Optional accessories : - Am ber Filters (optional) - Nig ht Vision eyepieces (optional) 1 pc.
An important point after buying a device Newcon Optik NEWCON Image Stabilizer SIB 16X40 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Newcon Optik NEWCON Image Stabilizer SIB 16X40 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Newcon Optik NEWCON Image Stabilizer SIB 16X40 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Newcon Optik NEWCON Image Stabilizer SIB 16X40 you will learn all the available features of the product, as well as information on its operation. The information that you get Newcon Optik NEWCON Image Stabilizer SIB 16X40 will certainly help you make a decision on the purchase.
If you already are a holder of Newcon Optik NEWCON Image Stabilizer SIB 16X40, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Newcon Optik NEWCON Image Stabilizer SIB 16X40.
However, one of the most important roles played by the user manual is to help in solving problems with Newcon Optik NEWCON Image Stabilizer SIB 16X40. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Newcon Optik NEWCON Image Stabilizer SIB 16X40 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
