Instruction/ maintenance manual of the product LRB 3000PRO Newcon Optik
Go to page of 28
Operation Manual LRB 3000PRO LASER RANGE FINDER BINOCULARS 105 Sparks Ave., Toronto, ON M2H 2S5, Canada.
ii.
iii IMPORTANT INFORMATION Read prior to activation You have ju st purchased a sophisticated el ectro-opti cal device that emits i nvisible laser radiation.
iv • Never aim the unit at highly re flective objects like mirrors and retroreflective surfaces, wh ich are in close proxim ity to the laser rangefinder.
1 TABLE OF CONTENTS 1. BRIEF DESCRIPTIO N.......................................2 Principle of operation ..................................................2 Key Feat ures ...............................................................3 2. DEVICE APPE ARANCE .
2 CAREFULLY READ ALL THE I NSTRUCTION S BEFORE USING! FAILURE TO OBEY THE INSTRUCTIONS WILL VOID THE WARRANT Y ! 1. BRIEF DESCRIPTION The LRB 3000PRO Laser Rangefinder Binoculars (System) is an advanced laser range finder that enab les instant distance, speed, and angula r measurements.
3 Key Features Modern digital circuitry allows targeting through most types of glass Speed detector Selection of the first, last or the most reflective target Distance is displayed in .
4 2. DEVICE APPEARANCE Fig. 1. Front view 1 – Eyepieces 2 – Objective lens 3 – Mode butto n 4 – Action butt on 5 – Battery com partment cover 6 – Rubber grip 5 4 1 3 2 6.
5 Fig. 2. Rear view 1 – Eyepieces; 7 – Inter pupillary distance ad justment lever; 8 – Identification and certification label (located at the bottom): 1 7 8.
6 Fig. 3 Display 1 – Low battery indi cator 2 – Reticle (either -¦- or ) 3 – Units of measurem ent 4 – Measurement resul t 5 – Laser activ e indicator 6 – Re ady mode indi cator 7 –.
7 3. DELIVERY SET Standard delivery set LRB is supplied in the following assembly: Qty LRB 3000PRO 1 Carrying case 1 Neck strap 1 Operation m anual 1 9V non-m agnetic Lit hium battery 1 Warranty card 1 Optional accessories Hard case 4.
8 Range Finder Laser Measuring range Accuracy First, last and auto target selection Meters/Yards display Last 10 readings recall Reticle Class 1, eye safe, 905 nm 10 – 3,000 m ± 1 m Yes Yes Yes -¦.
9 Environmental Operational temperature range Storage temperature range -25 / +50 o C (-13 / +122 o F) -45 / +65 o C (-49 / +149 o F) Mechanics Tripod thread Weight without battery Dimensions ¼” x 20 TPI 970 g 158x145x70 mm 5. OPERATION INSTRUCTIONS Preparing device for operation.
10 • A 9V Lithium non-magnetic battery guarantees over 5,000 shot s at room temperature. It is recomm ended for the field usage. In ad dition, this battery does no t influence the internal com pass. Note: Metal housing of t he battery may degrade the compass accuracy.
11 Factors affecti ng measuring distance Though ma ximum measurem ent distance depends on t arget reflectivity, we ather condi tions and other condit ions, for m ost targets the unit will provide accurate rang ing for up to 2,500 meters. Under good conditions a large size targ et can be measured up to 3,000 meters.
12 smaller, the farther, and the le ss reflective is the target – the higher is the possibility of obtainin g an incorrect measurement. To improve accuracy the unit has a built-in target selection logic that allows choosing which target to range : the nearest (‘first’), the far thest (‘last’), or the m ost reflective (‘aut o’).
13 parameters are measured in t he Scanni ng regim e though both will be quickly disp layed, the second one may be difficult to register by eye. Nevertheless a ll data is recorded and may be recalled (see Data Recall mode for d etails.) Operation and service modes Pressing Mode button (3, Fig.
14 o Compass from Mils to Degrees o Speed from KMH to M PH** rEc – allows data recall of the last 10 m easurement results, o CLr – Clears all Measurem ent SEt – allows the user to select.
15 Accuracy correction If the System produces som e measurement errors that lie beyond unit specification , it may be an indication that unit requires calibration similar to one condu cted at production level. To do accuracy correction, please sele ct Corr from CAL men u.
16 2 – Target should not have high-reflective surface (white color is not considered high reflective in this case. 3 – Unit shall be well leveled with deviation from 0 not more than ±0.75 degrees. Horizontal d irection shall be to Magnetic North (not True North).
17 Data Recall mode In Data Recall mode results of the last 10 measurements can be displayed. Measurement results are save d in on-board memory in sets depending on the paramet ers set for measuri ng,.
18 6. BEST MEASURING TECHNIQUE Laser range finder measures di stance by catching laser beam reflected from the target. Ever ything that i mproves reflect ion increases the measurement reliability and maximum range. 1. Use tripod when ranging remote targets.
19 7. STORAGE AN D MAINTENANCE The unit is a sophisticated precision optical instru ment equipped wi th laser and electr onics. There fore, it should be handled with due care. • Keep it away from direct sunl ight. • Avoid impacts, jolts, dust, moisture, and sharp changes of temperature.
20 8. TROUBLESHOOTING Ranging does not work. The display is transparent. Check the charge of the battery. Replace it if it is weak. Ranging does not work. The display ind icates results of the last measurement. Wait until display becomes transparen t, and press the Action button agai n.
21 9. WARRANTY NEWCON warrants this product against defects in material and workmanship for one year from the date of th e original purchase. Lon ger warranty is ava ilable, subject to the terms of the specific sales contract.
22 10. CUSTOMER SUPPORT Should you experience an y difficulties with your NEWCON OPTIK product, consult the enclo sed manual. If the problem remains unresol ved, contact o ur customer su pport departm ent at (416) 663-6963 or toll free at 1-877-368-6 666.
23 11. QUALITY CERTIFICATE Serial number _________ __________________ __ The unit has passed the quality inspection. Production date Quality Inspector Purchase date.
NEWCON OPTIK ™ 2011 R1.I – 2.11.
An important point after buying a device Newcon Optik LRB 3000PRO (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Newcon Optik LRB 3000PRO yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Newcon Optik LRB 3000PRO - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Newcon Optik LRB 3000PRO you will learn all the available features of the product, as well as information on its operation. The information that you get Newcon Optik LRB 3000PRO will certainly help you make a decision on the purchase.
If you already are a holder of Newcon Optik LRB 3000PRO, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Newcon Optik LRB 3000PRO.
However, one of the most important roles played by the user manual is to help in solving problems with Newcon Optik LRB 3000PRO. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Newcon Optik LRB 3000PRO along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
