Instruction/ maintenance manual of the product LRB 3000 PRO Newcon Optik
Go to page of 14
Newcon International ltd. © 2005-2006 Printed in Canada Operation Manual LRB 3000PRO LASER RANGE FINDER BINOCULAR In USA: 2331 Superior Ave. Cleveland, OH 44114 In Canada: 105 Sparks Ave.
IMPORTANT INFORMATION Read prior to activation You have just purchased a complicated electronic device, which emits invisible laser radiation. To operate it properly, please read this manual carefully. Here are some comm on precautions that must be noted.
9. CUSTOMER SUPPORT Should you experience any difficulties with your Newcon Optik product, please consult the enclosed manual. If the problem remains unresolved, contact our customer support departm ent at +1-416-663-6963 or toll free in North America at 1-877-368-6666.
TABLE OF CONTENTS 1. Brief description 2. Appearance of the device 3. Supplied accessories 4. Technical characteristics 5. Operation instructions 5.1. Preparing the device for operation 5.2. Measuring procedure 5.3. Mode switching procedure 5.4. Additional display information 5.
7. TROUBLESHOOTING The range-measuring mode does not work. The display is transparent. Check whether the battery is installed properly. Check the charge of the battery. Replace it if it is weak The range-measuring mode temporarily does not work. The display indicates results of the last measurement or transparent.
2. APPEARANCE OF THE DEVICE 1 – Eyepieces; 2 – Objective lens; 3 – Mode button; 4 – Action ( * ) button; 5 – B attery com partm ent cover; 6 – Rubber grip Fig. 1 6 6. STORAGE AND MAINTENANCE INSTRUCTIONS . Precautions: LRB 3000Pro is a sophisticated precision optical instrument equipped with electronics.
voltage of the primary 9-Volt battery drops below 7.2 Volts. At this point the System is still functional but the battery should be replaced as soon as possible.
4. TECHNICAL CHARACTERISTICS 1. Optics Magnification, x Objective lens diameter, mm Exit pupil diameter, mm Field of view Type of coating 7 40 5.7 6 ° Fully multi-coated glass optics 2.
5.4. Additional display information The System operates in the setting Modes that are displayed as follows (refer to Fig.3): Y/M – units of distance measurement: yards or meters (3). KMH/MPH – units of speed measurement: km /hour or miles/hour (3).
5.1. Preparing the device for operation. • Rotate counterclockwise and open the battery compartment cover (5) located between the objective lenses (fig. 1). • Insert one 9V Ni-MH battery into the battery compartment observing correct polarity. • Close the battery compartment cover (5).
• Cd12 – this mode sets the target selection to First. No other parameters of those, which were previously set, are influenced. • Cd13 – this mode sets the target selection to Auto. No other parameters of those, which were previously set, are influenced.
behind bushes, wires, flakes, or, opposite, measure a distance to wire, which hangs in front of the building wall. However, it cannot be guaranteed that the device will always measure the needed distance. It can happen that there will be no pulses bounced off the desired object at all.
If you want to leave the mode switching procedure without remembering your choice, you should press and keep held the M button for more than two seconds. This works like “Escape” key on a computer keyboard. The rangefinder will remain in the last set mode and return to the READY state.
M od e Screen dis pla y 1) S tanda r d 1 M A ,,, M eter D egree C odes 2) A M Go into sub menu Code 1 A M Me t e r Code 2 A M Ya rd Code 3 A M De g re e Code 8 A M Code 9 A M Deg re e Code 10 A M Ya r.
An important point after buying a device Newcon Optik LRB 3000 PRO (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Newcon Optik LRB 3000 PRO yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Newcon Optik LRB 3000 PRO - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Newcon Optik LRB 3000 PRO you will learn all the available features of the product, as well as information on its operation. The information that you get Newcon Optik LRB 3000 PRO will certainly help you make a decision on the purchase.
If you already are a holder of Newcon Optik LRB 3000 PRO, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Newcon Optik LRB 3000 PRO.
However, one of the most important roles played by the user manual is to help in solving problems with Newcon Optik LRB 3000 PRO. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Newcon Optik LRB 3000 PRO along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
