Instruction/ maintenance manual of the product DN310 Newcon Optik
Go to page of 10
13. QUALITY CERTIFICATE The DN 310 is suited for usage. Production date _____________________________ Serial number ______________________________ Quality control ________________________________ Purchase date ______________________________ Salesman __________________________________ Quality inspector ____________________ (Signatu re) NEWCON TM .
IMPORTANT INFORMATION Read prior to activation You have just purchased a com plicated electronic device. To operate it properly, please read this m anual carefully . Here are some com m on precautions that m ust be noted. • NEVER di sassemble the unit.
10. TROUBLE SHOOTI NG ] The scope does not work. Check th at the batteries are in stalled properly . Check th e charge of the batteries. Replace if th ey are w eak. Do not use old batteries w ith n ew ones. The image does not appear in focus. Bring the ins pected object to the center of the im age.
BEF ORE USE CAREFULLY READ ALL THE INSTRUCTIONS! FAILURE TO OBEY THE INSTRUCTIO NS WILL VOID TH E WARRANTY. 1. BRIEF DESCRIPTIO N DN 310 Night V ision Scope is a modern, universal nig ht vision device.
2. Rem ov e the rubber eyepiece g uard from the scope. 3. Set the ey epiece in the m edium position. 4. Screw the adapter ring with the cam era in an internal g roove of an eyepiece. 5. Switch on the dev ice and focus the assembled sy stem with the help of the objectives of the device and cam era.
3. TECHNICAL CHARACTERI STICS General Magni ficati on, x 2.8 (5.2*) 4.4 Field of view , degree 17 (9*) 10 Objective lens Focus leng th, m m 64 (128) 100 F-n um ber 1.
7. ADJUSTMENT OF THE SCOP E ON THE RIF LE Dimensions of the Reticule The dimensions listed below are g ood for shooting rang e of 100m. For a distance other than 100m the dimensions m ust be calculated accordingly in proportion. Focus l engt h of t he objectiv e lens , mm 64 100 Cross hair w idth - A , m m 17 11 Interv al - B, m 1.
NOTE. In order to ensure the long est operation time of the dev ice and full power of the I R illum inator (using one set of batteries) it is recomm ended to use Alk aline batteries, which ensure the most stable performance. b. Testing of operation During the brig ht time of the day : Turn on the on/off switch (13).
1- body of the dev ice 2- adapter rail with 7/8’’ Weav er prism encomp assing : (All parts of the align men t are supplied by New con Optik). Installation of the device is performed as follows : - Check the elevation of the fastening screws (2), pulling the rail (3) to the body of the dev ice (1) above the upper surface of the rail.
INSTALLATION RULES. a. Variant I – Adapter rail with Standard P rism type. Device is fixed with the help of the following parts: Front and rear feet (2, 3) are the standard feet with Standard prism (4), manufactured by the com panies that produce m ounts (for example, Ernst Apel Gm bH Germ any)).
An important point after buying a device Newcon Optik DN310 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Newcon Optik DN310 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Newcon Optik DN310 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Newcon Optik DN310 you will learn all the available features of the product, as well as information on its operation. The information that you get Newcon Optik DN310 will certainly help you make a decision on the purchase.
If you already are a holder of Newcon Optik DN310, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Newcon Optik DN310.
However, one of the most important roles played by the user manual is to help in solving problems with Newcon Optik DN310. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Newcon Optik DN310 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
