Instruction/ maintenance manual of the product NWCR602 New World
Go to page of 23
New W orld 60 - 70cm Hob T ouch UK Part No 082757106 Date 19/03/2013 Users Guide & Installation Handbook.
CONTENTS & INTRODUCTION CONTENTS • SAFET Y • USING THE PRODUCT • CLEANING • INST ALL A TION INSTRUCTIONS • TECHNICAL DA T A • CUSTOMER CARE INTRODUCTION Thank you for buying this British- built appliance from us.
Safety 5.162 BEFORE USING THE PRODUCT Make sure that you ha ve removed all packaging and wrapping. Some of the items inside this appliance may have additional wrapping. GENERAL WARNING! - The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements.
Safety 5.162 during use, as this will seriously affect the safet y and performance, particularly in relation to surface temper atures becoming hot and gas oper ated parts not workingefciently .The coolingfan(ift ted)is designed to run on after the control knob has been switched off .
Safety 5.162 electrical switch. Contact your local gas supplier immediately . ELECTRIC INDUCTION HOB WARNING:- Unattended cooking on a hob can be dangerous andmayresultinr e. NEVER try to extinguish arewithwater ,but switch off the appliance andthencoverame e.
Safety 5.162 fail-saf e. The pacemaker must be designed in compliance with the appropriate regulations. Caution: This appliance is for cooking purposes only .
Safety 5.162 the hob when you’re not around - take them of f the cook zone if you have to lea ve the kitchen even if you think it will only be for a moment, while you answer the door or phone.
Safety 5.162 distracted or leav e things unattended, so remember: If you’re called awa y from the cooker - by the phone or someone at the door , either take pans off the heat, or switch off y our hob. Don’t let yourself be distracted while cooking.
USING THE HOB - ELECTRIC (CERAMIC) Touch Controls The touch controls of your hob hav e been designedtoprovideyouwithngertip control of your hob , providing accurate and repeata.
Appyling Power To The Hob Before switching on the power supply to the appliance, switch off any bright lights (Suchasacookerhood)andensurethe appliance is not in direct sunlight. This is to enable the electronic controls to calibrate its sensitivity against the natur al ambientlighting(Approx30seconds).
USING THE HOB - ELECTRIC (CERAMIC) To operate the dual cook zone • Select the appropriate cook zone and set the power level as per the single zone • Whilsttheheaterdisplayisstillash - ing press the central dual z one key , a red LED will illuminate next to the cook zone to indicate it has been activated.
USING THE HOB - ELECTRIC (CERAMIC) Timer (All Cook Zones) All 4 cooking zones can be operated under the timer independently and at the same time for up to 99 minutes. When the set time expires the timer will beep and the cook zone will switch off automatically .
ERROR CODES Hob Status Codes Fault Description Acti on H Residual Heater No Fault " H" will switch off when glass surface drops below 60 o C Appliance Errors & Alarms Fault Description A.
CLEANING ELECTRIC HOB Ceramic glass hobs • It is recommended that you clean and wash the hob surface bef ore usingforthersttime.Applyathin coat of ceramic hob cleaner to the hob to help maintain and protect it. • The ceramic hob top can be cleaned using a clean, damp cloth or kitchen paper .
installation between hob base and appliance must be maintained. Installation above an oven Refer to the manuf acturer’s instructions for clearances abo ve the oven. W e recommend a 25mm gap between the bottom of the hob and appliance. Installation above a unit with a drawer or door The base of the appliance must be pro- tected from damage e.
installation Clearances and dimension – require- ments No shelf or overhang of combustible material should be closer than 650mm above the hob. There must be a minimum clearance of 50mm between the edges of the hob and any side walls; this clear ance must be maintained up to 420mm above the worktop.
installation Fitting into worktop Cut a hole in the work surface to the required size. The worktop must be of heat-resistant material or co vered with heat-resistant material. Protecting the cut-out; The types of chipboard used for work surfaces swell relatively quickly in contact with humidity .
installation Installation Bracket Advice Secure the hob to the worktop by means of the brackets pr ovided, taking the thick - ness of the worktop into account.
installation CONNECT TO THE ELECTRICITY SUPPLY WARNING: This appliance must be earthed. Only connect to the electrical mains terminal with the power switched off . The electrical mains terminal is live. Follow the terminal block connection schematic Loose and inappropriate connections can make the terminal overheat.
TECHNICAL DATA SUPPLY: 220 -240V ~ 50Hz 5.04kW - 6.4kW Refertothedatabadgeontheundersideofy ourhobforspecicpowerratingofyourmodel.
CUSTOMER CARE 15.030 CUSTOMER CARE WEB SHOP Having purchased a superior cooker , hob or hood from us, you’ll naturally want to keep it looking great.
Please keep this handbook for f uture reference, or for any one else who may use the appliance..
Please keep this handbook for f uture reference, or for any one else who may use the appliance..
An important point after buying a device New World NWCR602 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought New World NWCR602 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data New World NWCR602 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, New World NWCR602 you will learn all the available features of the product, as well as information on its operation. The information that you get New World NWCR602 will certainly help you make a decision on the purchase.
If you already are a holder of New World NWCR602, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime New World NWCR602.
However, one of the most important roles played by the user manual is to help in solving problems with New World NWCR602. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device New World NWCR602 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
