Instruction/ maintenance manual of the product XAVB5602-100NAS NETGEAR
Go to page of 12
Powerline 500 Nano PassThru (2-pack) XAVB5602 Installation Guide.
© 2012 NETGEAR, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc.
3 Package Contents Products sold in some locations include a Resource CD . Ethernet cables (2) Powerline adapters (2) France Germany/Europe Switzerland Your Powerline adapter may look like one of thes.
4 Hardware Features Filtered AC socket Power LED Powerline LED Ethernet LED Security button Factory Reset button Compatible Powerline and HomePlug AV certified devices include the NETGEAR XAV101, XAV1501, XAV1004, XAV2001, XAV2501, XAV2602 XAVN2001, XAV5001, XAV5004, and XAV5501.
5 LEDs The LEDS indicate the status of your Powerline adapters. • When you plug in the adapter, the Power LED lights up and turns green. • The adapter is not active when no Ethernet link has occurred for more than 10 minutes. The adapter enters power saving mode, and the Power LED turns amber.
6 Install Your Powerline Adapters.
You can plug a power strip into the filtered outlet, but do not plug your Powerline adapter into a power strip. The filtered AC socket removes some electrical noise.
8 Secure Your Powerline Network A Powerline network forms when at least two compatible Powerline devices communicate. After the Powerline network is up and running, you can use the Security buttons on the adapters to add encryption to your Powerline network.
9 Technical Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at http://www.netgear.com/register. Registration is required before you can use the telephone support service.
10 Safety Information • For national approvals (approval schemes other than CB), relevant national standards for plug, socket-outlet, and direct plug-in units (for example, US) shall also be consulted while testing and approving such products according to national standards.
11 cord needs to be a maximum of 1 m long and a minimum of 0.75 mm square of cross-sectional area. • Do not plug devices into the XAV5602 filtered AC outlet that exceed the product ratings. The output voltage of the filtered AC outlet is the same as the power outlet that the XAV5602 is plugged into.
NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134 USA May 2012.
An important point after buying a device NETGEAR XAVB5602-100NAS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NETGEAR XAVB5602-100NAS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NETGEAR XAVB5602-100NAS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NETGEAR XAVB5602-100NAS you will learn all the available features of the product, as well as information on its operation. The information that you get NETGEAR XAVB5602-100NAS will certainly help you make a decision on the purchase.
If you already are a holder of NETGEAR XAVB5602-100NAS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NETGEAR XAVB5602-100NAS.
However, one of the most important roles played by the user manual is to help in solving problems with NETGEAR XAVB5602-100NAS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NETGEAR XAVB5602-100NAS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
