Instruction/ maintenance manual of the product ROUTER WITH VOICE 3G10WV NetComm
Go to page of 96
3G10WV – HSP A 7.2 Mbps Wi-Fi Router with V oice User Guide.
2 – 3G10WV HSP A Wi-Fi Router with Voice Thank you for purchasing NetComm’ s HSP A Wi-Fi Router with V oice P re fa ce The purpose of this manual is to provide you detailed information on the installation, operation and application of your HSP A 7.
3G10WV HSP A Wi-Fi Router with Voice – 3 T able of Contents Thank you for purchasing NetComm’ s HSP A Wi-Fi Router with V oice .................................................... 2 Preface .........................................................
4 – 3G10WV HSP A Wi-Fi Router with Voice 6.3 Simple Network Time Protocol (SNTP) ..................................................................................................... 40 6.4 Access Control ............................................
I n tr od u ct io n.
6 – 3G10WV HSP A Wi-Fi Router with Voice Introduction With the increasing popularity of the 3G standard worldwide, this HSP A 7.2Mbps Wi-Fi Router with Voice provides you with triple-band coverage through expanding cellular networks throughout the world.
3G10WV HSP A Wi-Fi Router with Voice – 7 1 .1 F ea tu re s • This HSP A Wi-Fi Router with Voice allows you to share your 3G connection with multiple wireless or wired devices • Provides you with.
8 – 3G10WV HSP A Wi-Fi Router with Voice 1 .3 L ED I nd ic at or s The front panel LED indicators are shown in this illustration and followed by detailed explanations in the table below .
3G10WV HSP A Wi-Fi Router with Voice – 9 1 .4 R ea r Pa ne l The rear panel contains the ports for data and power connections. 1 2 3 4 5 6 8 7 (1) Main 3G Antenna (removable, SMA connection) (2) Power jack for DC power input (12VDC / 1.
Q u ic k S et up.
3G10WV HSP A Wi-Fi Router with Voice – 1 1 Quick Setup 2 .1 S et up P ro ce d ur e These steps explain how to quickly setup your 3G router: 1: Attach the two 3G antennas provided to the ports marked Main and AUX on the back of the router . The antennas should be screwed in a clockwise direction.
W e b U se r I nt er fa c e.
3G10WV HSP A Wi-Fi Router with Voice – 1 3 W eb User Interface This section describes how to access the device via the web user interface using a web browser such as Microsoft Internet Explorer (version 5.0 or later). 3 .1 D ef au lt S et t in gs The following are the default settings for the device.
14 – 3G10WV HSP A Wi-Fi Router with Voice 3 .2 T CP /I P Se tt i ng s DHCP Mode When your Router powers up, the Dynamic Host Configuration Protocol (DHCP) ser ver (on the device) will start automatically . T o set your PC for DHCP mode, check the Internet Protocol properties of your Local Area Connection.
3G10WV HSP A Wi-Fi Router with Voice – 1 5 3 .3 L og in P ro c ed ur e T o login to the web interface, follow the steps below: NOTE: The default settings can be found in 3.1 Default Settings. 1: Open a web browser and enter the default IP address for the Router in the Web address field.
16 – 3G10WV HSP A Wi-Fi Router with Voice 3 .4 W eb U se r In te r fa ce H om ep ag e The web user interface (WUI) is divided into two window panels, the main menu (on the top) and the display screen (on the bottom). The main menu has the following options: Basic, 3G Settings, Wireless, Management, Advanced, Voice and Status.
3G10WV HSP A Wi-Fi Router with Voice – 1 7 The following table provides further details. Fields Description Software version The software version of the device. Hardwar e version The Hardware version of the device Bootloader version The bootloader version of the device.
3 G S et t in gs.
3G10WV HSP A Wi-Fi Router with Voice – 1 9 3G Settings This menu includes 3G service Setup and PIN Configura tion. NOTE: Sections 9.3 and 9.4.2 also provide information about the 3G service. 4 .1 3 G Se rvi ce S et u p Select your 3G service settings according to predefined or custom profiles.
20 – 3G10WV HSP A Wi-Fi Router with Voice 4.1.1 Profile Setup Y our Service Provider will provide the informa tion required to complete the first time setup instructions below . This includes profile, username and password. Only complete those steps for which you have inf ormation and skip the others.
3G10WV HSP A Wi-Fi Router with Voice – 2 1 4 .2 P IN C on fig ur at io n This screen allows for changes to the 3G SIM card PIN code protection settings. NOTE: If you have entered the incorrect PIN 3 times, your SIM card will be locked for your security .
22 – 3G10WV HSP A Wi-Fi Router with Voice PIN Lock On After you are finished using your SIM card for Internet ser vice, you may wish to lock it a gain. In this case, first go to the 3G Settings - PIN Configuration screen, as shown below. Select PIN lock ON, enter the PIN code twice.
3G10WV HSP A Wi-Fi Router with Voice – 2 3 4.2.2 PIN Code Change If you wish to change your PIN code for greater security , enable the PIN Code protection. Go to the previous section and follow the procedure listed under PIN Lock On . After locking the SIM card, select PIN Code Change and enter your Old and New PIN codes in the fields provided.
W i re le s s.
3G10WV HSP A Wi-Fi Router with Voice – 2 5 Wireless The Wireless submenu provides access to Wireless Local Area Network (LAN) configuration settings including: • Wireless network name • Channel.
26 – 3G10WV HSP A Wi-Fi Router with Voice 5 .1 S et up This screen allows you to configure basic features of the wireless LAN interface. Y ou can enable or disable the wireless LAN interface, hide the network from active scans, set the wireless network name (also known as SSID) and restrict the channel set based on country requirements.
3G10WV HSP A Wi-Fi Router with Voice – 2 7 5 .2 S ec ur it y This Router includes a number of security options that provides you with a secure connection to a 3G network.
28 – 3G10WV HSP A Wi-Fi Router with Voice Select SSID Y our Service Set Identifier (SSID), sets your Wireless Network Name. Y ou can connect multiple devices including Laptops, Desktop PCs and PDAs to your Wireless Router . T o get additional devices connected, scan for a network, and locate the SSID shown on your Wireless Security Card.
3G10WV HSP A Wi-Fi Router with Voice – 2 9 5 .3 C on fig ur at i on The following screen appears when you select Configuration. This screen allows you to control the f ollowing advanced features o.
30 – 3G10WV HSP A Wi-Fi Router with Voice Option Description AP Isolation Select On or Off. By ena bling this feature, wireless clients associated with the Access Point can be linked. Band The new amendment allows IEEE 802.11g units to fall back to speeds of 11 Mbps, so IEEE 802.
3G10WV HSP A Wi-Fi Router with Voice – 3 1 Option Description 54g Mode Select Auto mode for g reatest compatibility . Select Performance mode for the fastest performance among 54g certified equipment. Select LRS mode if you are experiencing difficulty with legacy 802.
32 – 3G10WV HSP A Wi-Fi Router with Voice 5 .4 M AC F il te r This screen appears when Media Access Control (MAC) Filter is selected. This option allows access to be restricted based upon the unique 48-bit MAC address. T o add a MAC Address filter , click the Add button shown below .
3G10WV HSP A Wi-Fi Router with Voice – 3 3 5 .5 W ir el es s Br i dg e The following screen appears when selecting Wireless Bridge, and goes into a detailed explanation of how to configure wireless bridge features of the wireless LAN interface. Click Save/Apply to implement new configuration settings.
34 – 3G10WV HSP A Wi-Fi Router with Voice 5 .6 S ta ti on I n fo The following screen appears when you select Station Info, and shows authenticated wireless stations and their status. Click the Refresh button to update the list of stations in the WLAN.
M a na ge me nt.
36 – 3G10WV HSP A Wi-Fi Router with Voice Management The Management menu has the following maintenance functions and processes: 6.1 Device Settings 6.2 Simple Network Management Protocol (SNMP) 6.3 Simple Network Time Protocol (SNTP) 6.4 Access Control 6.
3G10WV HSP A Wi-Fi Router with Voice – 3 7 6.1.2 Update Settings The following screen appears when selecting Update from the submenu. By clicking on the Browse button, you can locate a previously saved filename as the configuration backup file. Click on the Update settings to load it.
38 – 3G10WV HSP A Wi-Fi Router with Voice 6.1.4 Update Fir mware The following screen appears when selecting Update Firmware. By following this screens steps, you can update your Routers firmware. Manual device upg rades from a locally stored file can also be performed using the following screen.
3G10WV HSP A Wi-Fi Router with Voice – 3 9 6 .2 C on fig ur e S NM P ag e nt o n 3G 1 0W V The Simple Network Management Protocol (SNMP) allows a network administrator to monitor a network by retrieving settings on remote network devices.
40 – 3G10WV HSP A Wi-Fi Router with Voice 6 .3 S im pl e Ne tw o rk T im e Pr ot oc ol (S NT P) This screen allows you to configure the time settings of your Router . T o automaticall y synchronize with Internet timeservers, tick the box as illustrated below .
3G10WV HSP A Wi-Fi Router with Voice – 4 1 6 .4 A cc es s Co nt r ol The Access Control option found in the Mana gement drop down menu, configures access related parameters in the following three areas: • Services • IP Addresses • Passwords Access Control is used to control local and remote management settings for your Router .
42 – 3G10WV HSP A Wi-Fi Router with Voice 6.4.2 IP Addr ess The IP Address option limits local access by IP address. When the Access Control Mode is enabled, only the IP addresses listed here can access the device. Before ena bling Access Control Mode, add IP addresses with the Add button.
3G10WV HSP A Wi-Fi Router with Voice – 4 3 6.4.3 Passwords The Passwords option configures your account access password for your Router . Access to the device is limited to the following three user.
A d va nc e d Se tu p.
3G10WV HSP A Wi-Fi Router with Voice – 4 5 Advanced Setup This chapter explains advanced setup for your Router:.
46 – 3G10WV HSP A Wi-Fi Router with Voice 7 .1 L oc al A r ea N et wo rk (L AN ) This screen allows you to configure the Local Area Network (LAN) interface on your Router .
3G10WV HSP A Wi-Fi Router with Voice – 4 7 Enable DHCP Server Relay T o relay DHCP requests from the subnet with no DHCP ser ver on it to a DHCP server on other subnets. DHCP Server Relay is disabled by default. T o access enable DHCP relay , please un-tick NA T enable first, that means to disable NA T first, and then press save button.
48 – 3G10WV HSP A Wi-Fi Router with Voice 7 .2 N et wo rk A dd re ss T r an sl at io n (N A T) 7.2.1 Port Forwarding Port Forwarding allows you to direct incoming traffic from the Internet side (identified by Protocol and External port) to the internal server with a priva te IP address on the LAN side.
3G10WV HSP A Wi-Fi Router with Voice – 4 9 Options Description Select a Service Or Custom Server User should select the service from the list. Or Create a customer server and enter a name f or the server Server IP Addr ess Enter the IP address for the server .
50 – 3G10WV HSP A Wi-Fi Router with Voice 7.2.2 Port T riggering Some applications require specific ports in the Router’ s firewall to be open for access by remote parties.
3G10WV HSP A Wi-Fi Router with Voice – 5 1 Options Description Select an Application or Custom Application User should select the application from the list. or User can enter the name of their choice. T rigger Port Start Enter the starting trigger port number (when you select custom application).
52 – 3G10WV HSP A Wi-Fi Router with Voice 7 .3 S ec ur it y Y our Router can be secured with IP Filtering or Parental Control functions. 7.3.1 IP Filtering The IP Filtering screen sets filter rules that limit incoming and outgoing IP traffic. Multiple filter rules can be set with at least one limiting condition.
3G10WV HSP A Wi-Fi Router with Voice – 5 3 Options Description Filter Name The filter rule label Protocol TCP , TCP/UDP , UDP or ICMP Source IP address Enter source IP address Source Subnet Mask En.
54 – 3G10WV HSP A Wi-Fi Router with Voice 7.3.2 Parental Control This Parental Control allows you to restrict access from a Local Area Network (LAN) to an outside network through the Router on selected days at certain times. Make sure to activate the Internet Time server synchronization as described in section 6.
3G10WV HSP A Wi-Fi Router with Voice – 5 5 7 .4 R ou ti ng Default Gateway , Static Route and Dynamic Route settings can be found in the Routing link as illustrated below . 7.4.1 Default Gateway If the Enable Automatic Assigned Default Gateway checkbox is selected, this device will accept a default Gateway assignment.
56 – 3G10WV HSP A Wi-Fi Router with Voice 7.4.2 Static Route The Static Route screen displays the configured static routes. Click the Add or Remove buttons to change settings. Click the Add button to display the f ollowing screen. Enter Destination Network Address, Subnet Mask, Gateway IP Address and/or W AN Interface.
3G10WV HSP A Wi-Fi Router with Voice – 5 7 7.4.3 Dynamic Route T o activate this option, select the Enabled radio button for Global RIP Mode. T o configure an individual interface, select the desired RIP version and opera tion, f ollowed by placing a check in the Enabled checkbox for that interface.
58 – 3G10WV HSP A Wi-Fi Router with Voice 7.5.2 Dynamic DNS The Dynamic DNS service allows a dynamic IP address to be aliased to a sta tic hostname in any of a selection of domains, allowing the router to be more easily accessed from various loca tions on the internet.
3G10WV HSP A Wi-Fi Router with Voice – 5 9 V o i ce.
60 – 3G10WV HSP A Wi-Fi Router with Voice The 3G10WV HSP A 7.2Mbps Wi-Fi Router with Voice allows you to make telephone calls over the 3G Mobile/ Cellular T elephone network using a standard Analogue T elephone via the built in RJ-11 Phone port. Please refer to the documentation provided by the manufacturer for operating your Analogue T elephone.
S t at us.
62 – 3G10WV HSP A Wi-Fi Router with Voice Status The Status menu has the following submenus: • Diagnostics • System Log • 3G network • Statistics • Route • ARP • DHCP • PING.
3G10WV HSP A Wi-Fi Router with Voice – 6 3 9 .1 D ia gn os ti c s The Diagnostics menu provides feedback on the connection status of the device. The individual tests are listed below .
64 – 3G10WV HSP A Wi-Fi Router with Voice 9 .2 S ys te m Lo g This function allows you to view system events and configure related options. Follow the steps below to ena ble and view the System Log. 1: Click Configure System Log to continue. 2: Select the system log options (see table below) and click Save/Apply .
3G10WV HSP A Wi-Fi Router with Voice – 6 5 Option Description Log Indicates whether the system is currently recording events. Y ou can ena ble or disable event logging. By default, it is disa bled. Log level Allows you to configure the event level and filter out unwanted events below this level.
66 – 3G10WV HSP A Wi-Fi Router with Voice 9 .3 3 G St at us Select this option for detailed status information on your Routers 3G connection. Consult the table on the next page for detailed field descriptions.
3G10WV HSP A Wi-Fi Router with Voice – 6 7 Status Description Manufacturer The manufacturer of the embedded 3G module. Model The model name of the embedded 3G module. FW Rev . The firmware version of the 3G module. IMEI The IMEI (International Mobile Equipment Identity) is a 15 digit number that is used to identify a mobile device on a network.
68 – 3G10WV HSP A Wi-Fi Router with Voice Status Description Signal Level (RSSI) 3G Radio Signal Strength Index Value 2 ~ 5 6 ~ 10 11 ~ 13 14 ~ 17 18 ~ 31 99 Signal level in dBm -109 ~ -103 -101 ~ -.
3G10WV HSP A Wi-Fi Router with Voice – 6 9 9 .4 S ta ti st ic s These screens provide detailed information for: • Local Area Network (LAN) and Wireless Local Area Network (WLAN) • 3G Interfaces NOTE: These statistics page refresh every 15 seconds.
70 – 3G10WV HSP A Wi-Fi Router with Voice 9.4.2 3G Statistics Click 3G network in the Statistics submenu to display the screen below . Service Shows the service type Inbound Octets Number of received octets over the interface. Packets Number of received packets over the interface.
3G10WV HSP A Wi-Fi Router with Voice – 7 1 9 .5 R ou te Select Route to display the paths the Router has found. Field Description Destination Destination network or destination host Gateway Next hop.
72 – 3G10WV HSP A Wi-Fi Router with Voice 9 .6 A RP Click ARP to display the ARP information. Field Description IP address Shows IP address of host pc Flags Complete Incomplete Permanent Publish HW Address Shows the MAC address of host pc Device Shows the connection interface 9 .
3G10WV HSP A Wi-Fi Router with Voice – 7 3 9 .8 P IN G The PING menu provides feedback of connection test to an IP address or a host name. Input a IP address or a host name, e.g www .google.com and press Submit. The connection test result will be shown as below .
74 – 3G10WV HSP A Wi-Fi Router with Voice C L I co m ma nd s Vi a T e ln et.
3G10WV HSP A Wi-Fi Router with Voice – 7 5 CLI commands via T elnet Show all CLI commands Description: List all availa ble CLI commands that the 3G router supports.
76 – 3G10WV HSP A Wi-Fi Router with Voice Description: End the telnet session Synopsis: logout Example: > logout Reset/reboot device Description: T o reboot the router . Synopsis: reboot Example: > reboot Radio Signal Strength Description: Display the 3G radio signal strength.
3G10WV HSP A Wi-Fi Router with Voice – 7 7 System mode: WCDMA PS state: Attached WCDMA band: WCDMA800 GSM band: Unknown WCDMA channel: 4436 GSM channel: 65535 GMM (PS) state:REGISTERED NORMAL SERVIC.
78 – 3G10WV HSP A Wi-Fi Router with Voice Description: T o report the current availa ble and supported network technologies being used. Synopsis: sierra show --mode Example: > sierra show --mode .
3G10WV HSP A Wi-Fi Router with Voice – 7 9 Description: T o set and quer y authentication method (P AP/CHAP/AUTO) for PDP-IP packet da ta calls if the profile supports.
80 – 3G10WV HSP A Wi-Fi Router with Voice > sierra set --comp 1 0 enable • sierra show --comp <profile> Description: T o display the IP header or da ta compression status.
3G10WV HSP A Wi-Fi Router with Voice – 8 1 Synopsis: sierra show --PIN-LOCK Example: > sierra show --PIN-LOCK PIN code protection is disabled • sierra show --SIM Description: T o display the SIM card sta tus.
82 – 3G10WV HSP A Wi-Fi Router with Voice > wlan wlan command usage : wlan config [option] wlan security [option] wlan macfilter [option] wlan wds [option] wlan info [option] wlan –help Each option will be explained separately below .
3G10WV HSP A Wi-Fi Router with Voice – 8 3 Description: Enable or disa ble wireless LAN interface. Valid value: 0 or 1 0 – disabled the wireless LAN interface. 1 – enabled the wireless LAN interface. Default value: 1 --hide <0|1> Description: Hide wireless LAN network name (SSID).
84 – 3G10WV HSP A Wi-Fi Router with Voice Default value: 0 --mrate <rateVal> Description: Set the wireless LAN Multicast rate. Valid value: 0, 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 (Mbps) 0 means auto Default value: 0 --rts <rtsThreshold> Description: Set the wireless LAN RTS threshold.
3G10WV HSP A Wi-Fi Router with Voice – 8 5 Default value: long E xa mp le 1 : User wants to enable the wireless LAN, configure the wireless LAN network name (SSID) as “T estAP”, configure wire.
86 – 3G10WV HSP A Wi-Fi Router with Voice [--nkey2 <keyStr>] [--nkey3 <keyStr>] [--keyidx <2|3>] wlan security psk / psk2 / psk2mix [--wpaenc <tkip|aes|tkip+aes>] [--rekey &l.
3G10WV HSP A Wi-Fi Router with Voice – 8 7 3G10WV - HSP A 7.2Mbps Wi-Fi Router with Voice USER GUIDE --rekey <inter val> Description: Set the Group Rekey Inter val Default value: 0 --pskey <”pskeyStr”> Description: Set the WP A Pre-Shared Key Valid value: string of 8 ~ 63 characters.
88 – 3G10WV HSP A Wi-Fi Router with Voice C on fig ur e wi r el es s LA N M AC fi lt er Description: Enable, disable and configure the wireless LAN MAC filter feature. This fea ture enables the router to allow or deny connection from wireless client based on the MAC address.
3G10WV HSP A Wi-Fi Router with Voice – 8 9 [--rmac3 <MACaddress>] [--rmac4 <MACaddress>] Options: --mode <ap|wds> Description: configure wireless AP mode. Default value: ap --restrict <enabled|disabled> Description: enable or disa ble bridge restrict mode.
90 – 3G10WV HSP A Wi-Fi Router with Voice > wlan info --config Wlan Config Info : Basic : wlan config enable = 1 wlan config hide = 0 wlan config ssid = Series7Wireless7890 wlan config bssi.
3G10WV HSP A Wi-Fi Router with Voice – 9 1 wlan security WepKeyBit = 128 wlan security WepKey2 = wlan security WepKey3 = wlan security WepCurrentKeyindex = 1 --macfilter Description: display the li.
92 – 3G10WV HSP A Wi-Fi Router with Voice • none: disable the ser vice. • local: enable the ser vice at LAN side onl y • remote: enable the ser vice at W AN side only • both: enable the ser vice at both LAN and W AN sides. (2) T o add an entr y of IP range that to be ena ble to manage the gateway .
3G10WV HSP A Wi-Fi Router with Voice – 9 3 config AP mode. Default value : ap --restrict <enabled|disabled> config bridge restrict mode. Default value : disabled --rmac1 <MACaddress> -.
94 – 3G10WV HSP A Wi-Fi Router with Voice --macfilter list parameters of macfilter command --wds list parameters of wds command --station list authenticated wireless stations and their sta tus N O.
3G10WV HSP A Wi-Fi Router with Voice – 9 5.
NetComm Limited ABN 85 002 490 486 PO Box 1200, Lane Cove NSW 2066 Australia E – sales@netcomm.com.au W – www .netcomm.com.au C on ta ct I nf or ma ti on If you have any technical difficulties with your product, please do not hesitate to contact NetComm’ s Customer Support Department.
An important point after buying a device NetComm ROUTER WITH VOICE 3G10WV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NetComm ROUTER WITH VOICE 3G10WV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NetComm ROUTER WITH VOICE 3G10WV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NetComm ROUTER WITH VOICE 3G10WV you will learn all the available features of the product, as well as information on its operation. The information that you get NetComm ROUTER WITH VOICE 3G10WV will certainly help you make a decision on the purchase.
If you already are a holder of NetComm ROUTER WITH VOICE 3G10WV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NetComm ROUTER WITH VOICE 3G10WV.
However, one of the most important roles played by the user manual is to help in solving problems with NetComm ROUTER WITH VOICE 3G10WV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NetComm ROUTER WITH VOICE 3G10WV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
