Instruction/ maintenance manual of the product XP29 Xtra, XM29 Xtra NEC
Go to page of 40
1 R Multimedia Monitor User's Manual R 29 Xtra Xtra 29 NEC Technologies, Inc. 1250 N. Arlington Heights Road, Suite 500 Itasca, Illinois 60143-1248 R 29 Xtra Xtra 29 Printed in Thailand 78410091 MultiSync is a registered trademark of NEC Technologies, Inc.
2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UNLESS THE PRONGS CAN BE FULLY INSERTED.
3 MISE EN GARDE: A F I N D E R E D U IRE LES RISQUES D’ELECTRO- CUTION, NE PAS DEPOSER LE COUVERCLE, IL N’Y A AUCUNE PIECE UTILISABLE A L’INTERIEUR DE CET APPAREIL.
4 LIMITED WARRANTY NEC Multimedia Monitor Products NEC Technologies, Inc.(hereafter NECTECH)warrants this product to be free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Parts and labor are warranted for (1) One Year and CRT’s for (1) One year from the date of the first customer purchase.
5 1. Introduction Introduction to the MultiSync XP29 Xtra/XM29 Xtra .............................................................. 1 Feature Highlights ...................................................................................................
6 1 2 OSM and IPM are trademarks of NEC Technologies, Inc. IBM PC/AT, PS/2, VGA, S-VGA, 8514/A and XGA are registered trademarks of International Business Machines Corporation. Apple and Macintosh are registered trademarks of Apple Computer, Inc. Microsoft is a registered trademark of Microsoft Corporation.
7 PROCEED VIDEO 1 EXIT VIDEO 2 RGB 1 RGB 2/DTV POWER /STANDBY ▼ ▼ − ＋ Part Names and Functions DIP SW REMOTE EXT SPEAKERS SPEAKERS MUST HAVE MORE THAN 5WATT RATING IMPEDANCE 8 .
8 Terminal Board 5 6 AB DIP SW REMOTE EXT SPEAKERS SPEAKERS MUST HAVE MORE THAN 5WATT RATING IMPEDANCE 8 OHM AC IN SPEAKER SELECT RIGHT LEFT 75 HIGH INT EXT BNC IN IN R L(MONO) AUDIO VIDEO 1 S 1 2 3 4.
9 7 8 Terminal Board DIP SW REMOTE EXT SPEAKERS SPEAKERS MUST HAVE MORE THAN 5WATT RATING IMPEDANCE 8 OHM AC IN SPEAKER SELECT RIGHT LEFT 75 HIGH INT EXT BNC IN IN R L(MONO) AUDIO VIDEO 1 S 1 2 3 4 5 .
10 9 10 Terminal Board I DIP SW REMOTE EXT SPEAKERS SPEAKERS MUST HAVE MORE THAN 5WATT RATING IMPEDANCE 8 OHM AC IN SPEAKER SELECT RIGHT LEFT 75 HIGH INT EXT BNC IN IN R L(MONO) AUDIO VIDEO 1 S 1 2 3 .
11 79645721 POWER ON RGB 2 RGB 1 VIDEO 2 VIDEO 1 POSITION / CONTROL PROCEED EXIT SCAN NORMAL SIDE PIN HEIGHT WIDTH BRIGHT CONTRAST MUTE NORMAL VOLUME OFF DEGAUSS MULTIMEDIA MONITOR RD-354E 11 12 Remote Control Unit NOTE: When not in use the remote control unit is conveniently stowed in the holder on the rear panel.
12 79645721 POWER ON RGB 2 RGB 1 VIDEO 2 VIDEO 1 POSITION / CONTROL PROCEED EXIT SCAN NORMAL SIDE PIN HEIGHT WIDTH BRIGHT CONTRAST MUTE NORMAL VOLUME OFF DEGAUSS MULTIMEDIA MONITOR RD-354E 13 14 Raster Control 7 WIDTH ( + / -) Adjusts the horizontal size of the image.
13 16 15 Battery Installation and Replacement The remote control is powered by two 1.5V AA batteries. Remote Control Cautions • Do not drop or mishandle the remote control unit. • Do not get the remote control unit wet. If the remote gets wet, wipe it dry immediately.
14 18 17 Functions of DIP SW Functions and Settings of DIP SW This DIP switch is used for Sync. Control, Intelligent Power Manager, External control, wireless control, and OSM control. To change a switch setting use a pointed object, such as a pen or pencil, to push the switch to the desired position.
15 DIP SW REMOTE EXT SPEAKERS SPEAKERS MUST HAVE MORE THAN 5WATT RATING IMPEDANCE 8 OHM AC IN SPEAKER SELECT RIGHT LEFT INT EXT BNC IN IN R L(MONO) AUDIO VIDEO 1 S 1 2 3 4 5 6 7 8 ON RGB1 PC / EXT CTL.
16 22 21 Connecting Your PC or Macintosh Computer Connecting your PC or Macintosh computer to your MultiSync XP29 Xtra/ XM29 Xtra will enable you to display your computer's screen image.
17 Pin No. 1 2 3 12 13 14 15 4 5 6 7 8 11 10 9 23 24 D-Sub 15 Pin RGB Signal Composition Pin Assignments and Signal Levels for 15 pin RGB (Analog) Signal to be connected (D-SUB 15 pin) RED GREEN or Sync on Green BLUE SDA H.
18 26 25 External Speaker Connections External speakers may be connected to the monitor to reproduce sound from VIDEO 1, VIDEO 2, RGB 1 or RGB 2 signal sources. External speakers may be connected directly to the EXTERNAL SPEAKERS terminals or indirectly by connecting a stereo system amplifier to the audio outputs.
19 27 28 Operation Power This section describes how to select a computer or video source and how to adjust the picture and sound. General Controls Before you turn on your MultiSync XP29 Xtra/XM29 Xtra monitor ensure that the computer or video source is turned on.
20 g. BRIGHT Press to adjust the brightness of video display. h. CONTRAST Press to adjust the contrast of video display. c. HEIGHT Press to adjust the vertical size of the image. d. SIDE PIN Press to adjust the curvature of the edges of the left and right side of the display image either inward or outward.
21 31 32 i. NORMAL( visual) Press to reset all the stored adjustment visual data and recall the factory preset data. When a specific control is selected, this key resets the selected visual adjustments. Accessing OSM Press the PROCEED key on the remote control or front bezel.
22 V-position/V-height/V-linearity Controls Group The V-position/V-height/V-linearity Controls allow you to adjust the vertical position, vertical size and vertical linearity of the image. V-POSITION : Pressing + or - moves the image vertically up or down.
23 36 35 OSM Location/OSM Display Time Control You can choose where you would like OSM image to appear on your screen. Selecting OSM location allows you to manually adjust the OSM menu left, right, up, or down. The OSM menu will stay on as long as it is in use.
24 DV Controls Group The DV controls allow you to select an RGB2 signal format, to emphasize the brightness of neutral tint, and to enhance the contrast by emphasizing black. RGB2 SOURCE SELECT : Pressing + selects AUTO, RGB, YC B C R , YP B P R , or RGB CTL in this order.
25 Pressing the PROCEED key proceeds to the following adjustments TOP HORIZONTAL2 : Corrects the vertical lines on the top of the screen(edge). BOTTOM HORIZONTAL2 : Corrects the vertical lines on the bottom of the screen(edge). TOP VERTICAL2 : Corrects the horizontal lines on the top of the screen(edge).
26 42 41 All Visual Settings The above warning statement will appear to confirm that you do want to reset all visual settings. If you want to reset all visual settings, press PROCEED. The following items can be reset: BRIGHTNESS, CONTRAST, COLOR, TINT, SHARPNESS, COLOR TEMP.
27 44 43 POWER ON MODE This control allows you to set the monitor to default to any one of its inputs each time the monitor is turned on. LANGUAGE OSM menus are available in six languages: English, German, French, Spanish, Italian, and Swedish.
28 45 CONVERGENCE SETUP : Corrects mis-CONVERGENCE generated by earth’s magnetism. Normally set to MODE1. Select an appropriate mode according to your monitor’s location.
29 Command Communication Sequence When external equipment such as a personal computer gives the command to the XP29 Xtra/XM29 Xtra, the XP29 Xtra/XM29 Xtra returns an ACK. So make sure that the external equipment receives this ACK. The XP29 Xtra/XM29 Xtra returns an ACK if it has received the command correctly.
30 50 49 XP29 Extra /XM29 Extra → PC Example: Input switching (VIDEO 1) from the PC to the XP29 Xtra/XM29 Xtra(when the address selector equals 0) PC → XP29 Xtra /XM29 Xtra XP29 Xtra /XM29 Xtra .
31 51 52 Troubleshooting Before arranging for service by the NEC Service Center, check the following to be sure repairs are needed. Problem No Picture or Sound Sound OK; poor picture with VIDEO signal input. Sound OK; poor picture with RGB signal input.
32 Specifications 54 53 Video Output Terminals THROUGH OUT (Video 1, 2) 1.0Vp-p, 75 Ohms unbalanced (BNC Jack), Composite video signal, Sync-negative. THROUGH OUT (S-VIDEO 1, 2) Y : 1.0Vp-p, 75 Ohms unbalanced, Sync-negative. C : 0.28Vp-p, 75 Ohms unbalanced, Color burst level.
33 56 55 Maximum Resolution RGB 1024( H) X 768(V) pixels VIDEO Horizontal: 500 lines /S-VIDEO Horizontal : 600 lines Video Bandwidth RGB: 60 MHz at-3dB (Note that source is RGB2 and in HIGH CONTRAST, MODE2 or AUTO at 40 kHz or over is selected.
34 Multisync PROCEED VIDEO 1 EXIT VIDEO 2 RGB 1 RGB 2/DTV POWER /STANDBY ▼ ▼ − ＋ 21.0'' (533mm) 20.4'' (518mm) 14.
35 59 Input Signal Reference Chart Separate Sync. Timing Charts Composite Sync. 60 A B C DE VIDEO O P QR S VIDEO Sync. Polarity: Positive / Negative HORIZONTAL VERTICAL VIDEO A B CD E O P QR S VIDEO Sync.
36 Composite Sync. & Video (Sync. on Green) 62 61 Recommended Sync Signal Timing Horizontal Duty should be 3 to 30%. Horizontal sync width should exceed 0.9 µ sec. Horizontal back porch should exceed 2.0 µ sec at sync on green and 1.2 µ sec at others except when at 15KHz.
37 64 63 Typical Input Signal Timing Resolution Horizontal Frequency (A) Horizontal Period (B) Horizontal Pulse Width (C) Horizontal Back Porch (D) Horizontal Active Area (E) Hrizontal Front Porch 640 × 350 31.469KHz 31.778 µ sec 3.813 µ sec 1.589 µ sec 26.
38 66 65 Resolution Vertical Frequency (O) Vertical Period (P) Vertical Pulse Width (Q) Vertical Back Porch (R) Vertical Active Area (S) Vertical Front Porch 640 × 480 72.809Hz 13.735msec 0.079msec 0.740msec 12.678msec 0.238msec VESA 640 × 480 at 72Hz VESA 800 × 600 at 56Hz 800 × 600 56.
39 68 67 Signal Identification for Raster Preset Hor - - NEG NEG POS POS NEG NEG NEG POS POS NEG NEG NEG POS POS POS NEG NEG NEG POS POS NEG NEG NEG POS POS NEG NEG NEG POS POS NEG NEG NEG POS Ver - -.
40 69 70 Service and Support Policies NEC Technologies is committed to providing the highest quality service and support for your MultiSync presentation monitor.
An important point after buying a device NEC XP29 Xtra, XM29 Xtra (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC XP29 Xtra, XM29 Xtra yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC XP29 Xtra, XM29 Xtra - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC XP29 Xtra, XM29 Xtra you will learn all the available features of the product, as well as information on its operation. The information that you get NEC XP29 Xtra, XM29 Xtra will certainly help you make a decision on the purchase.
If you already are a holder of NEC XP29 Xtra, XM29 Xtra, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC XP29 Xtra, XM29 Xtra.
However, one of the most important roles played by the user manual is to help in solving problems with NEC XP29 Xtra, XM29 Xtra. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC XP29 Xtra, XM29 Xtra along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
